Waste managementis the collection, transport, processing, recycling or disposal, and monitoring of waste materials. Concern over environment is being seen a massive increase in recycling globally which has grown to be an important part of modern civilization. The consumption habitsof modern consumerist lifestyles are causing a huge global waste problem.  Industrialization and economic growth has produced more amounts of waste, including hazardous and toxic wastes. There is a growing realization of the negative impacts that wastes have had on the local environment (air, water, land, human health etc.)

Waste management is the collection of all thrown away materials in order to recycle them and as a result decrease their effects on our health, our surroundings and the environment and enhance the quality of life.Waste management practices differ for developed and developing nations, for urban and rural areas, and for residential and industrial producers.Waste Management flows in a cycle: monitoring, collection, transportation, processing, disposal or recycle. Through these steps a company can effectively and responsibly manage waste output and their positive effect they have on the environment.

Waste generation per capita has increased and is expected to continue to climb with growing population, wealth, and consumerism throughout the world. Approaches to solving this waste problem in a scalable and sustainable manner would lead us to a model that uses waste as an input in the production of commodities and value monetized, making waste management a true profit center. The conversion of waste as a potential source of energy has a value as a supplemental feedstock for the rapidly developing bio-fuels sector. A variety of new technologies are being used and developed for the production of biofuels which are capable of converting wastes into heat, power, fuels or chemical feedstock.

Thermal Technologies like gasification, pyrolysis, thermal depolymerization, plasma arc gasification, and non–thermal technologies like anaerobic digestion, fermentation etc are a number of new and emerging technologies that are able to produce energy from waste and other fuels without direct combustion.Biodegradable wastes are  processed by composting, vermi-composting, anaerobic digestion or any other appropriate biological processing for the stabilization of wastes. Recycling of materials like plastics, paper and metals should be done for future use.

There is a clear need for the current approach of waste disposal in India that is focussed on municipalities and uses high energy/high technology, to move more towards waste processing and waste recycling (that involves public-private partnerships, aiming for eventual waste minimization - driven at the community level, and using low energy/low technology resources.



We can provide you detailed project reports on the following topics. Please select the projects of your interests.
Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the ost of raw material, formulating the cash flow statement, projecting the balance sheet etc.
We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics. Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.


We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Add multiple items to inquiry

Select the items and then press Add to inquiry button

Sort by :
Yeast from Molasses
Yeast from Molasses

There are two types of yeast as compressed yeast. It is convenient to use dry yeast powder for bakeries its handling is simple and its preservation... Read More

Capacity : 5.00 MT/Day
Plant and Machinery cost: 137.00 Lakhs
Working Capital : 71.00
Rate of Return (ROR):62.94%
Break Even Point (BEP):63.51 %
TCI :284.00 Lakhs
Cost of Project : 284.00Lakhs
Add To Inquiry Basket
Oxalic Acid From Rice Husk
Oxalic Acid From Rice Husk

Oxalic acid owing to its manifold uses as mordant in dyeing & cloth printing, cleaning of leather, metal polishing, for rust scale removal, etc... Read More

Capacity : 600 MT/Annum
Plant and Machinery cost: 51.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):23.15%
Break Even Point (BEP):0.00 %
TCI :82.00 Lakhs
Cost of Project : 82.00Lakhs
Add To Inquiry Basket
Lead Metal From Lead Ore
Lead Metal From Lead Ore

Lead is an essential commodity in the modern industrial world, ranking fifth in tonnage consumed after Iron, Copper, Aluminium and Zinc. The main u... Read More

Capacity : 30 MT/Day
Plant and Machinery cost: 244.00 Lakhs
Working Capital : 338.00
Rate of Return (ROR):115.05%
Break Even Point (BEP):24.30 %
TCI :638.00 Lakhs
Cost of Project : 638.00Lakhs
Add To Inquiry Basket
Bricks From Fly Ash
Bricks From Fly Ash

Bricks may be made from a no. of different kinds of materials but they must usually posses a certain amount of plasticity. Fly ash is one of them. ... Read More

Capacity : 250 Lacs Nos/Annum
Plant and Machinery cost: 27.00 Lakhs
Working Capital : 62.00
Rate of Return (ROR):27.16%
Break Even Point (BEP):65.69 %
TCI :158.00 Lakhs
Cost of Project : 158.00Lakhs
Add To Inquiry Basket
Municipal Waste Treatment
Municipal Waste Treatment

Municipal waste are wet solid waste which comes out from the domestic waste, marketing area waste, slaughter?s house waste, dead animal waste, pape... Read More

Capacity : 24 Tons/Day
Plant and Machinery cost: 75.00 Lakhs
Working Capital : 20.00
Rate of Return (ROR):32.02%
Break Even Point (BEP):62.83 %
TCI :119.00 Lakhs
Cost of Project : 119.00Lakhs
Add To Inquiry Basket
Compound Wax from Residual Oil
Compound Wax from Residual Oil

The wax position in India is very critical which is well known to every one. It is always in short supply owing to number of uses in number of Indu... Read More

Capacity : 1.0 MT/Day
Plant and Machinery cost: 10.00 Lakhs
Working Capital : 24.00
Rate of Return (ROR):44.36%
Break Even Point (BEP):46.52 %
TCI :54.00 Lakhs
Cost of Project : 54.00Lakhs
Add To Inquiry Basket
Paper from Waste Paper, Bamboo Chips, Rice Husk & Wheat Husk
Paper from Waste Paper, Bamboo Chips, Rice Husk & Wheat Husk

Paper being one of the basic needs of life, it occupies an important position in the world. Paper made from rice and wheat husk is widely used for ... Read More

Capacity : 150 MT /Day
Plant and Machinery cost: 340.00 Lakhs
Working Capital : 1600.00
Rate of Return (ROR):81.74%
Break Even Point (BEP):35.60 %
TCI :2499.00 Lakhs
Cost of Project : 2499.00Lakhs
Add To Inquiry Basket
Recycled Polyester Fiber from used PET Bottles Manufacturing Business
Recycled Polyester Fiber from used PET Bottles Manufacturing Business

 

Recycled polyester fiber is made by recycling ... Read More

Capacity : Recycled Polyester Fiber 1,500,000 Kgs Per Annum
Plant and Machinery cost: 76.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):55.00 %
TCI :0.00 Lakhs
Cost of Project : 393.00Lakhs
Add To Inquiry Basket
Setup Steel Ingot from Scrap Business
Setup Steel Ingot from Scrap Business

Steel Ingot from Scrap come... Read More

Capacity : Steel Ingot 3,000 MT Per Annum
Plant and Machinery cost: 445.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):26.00%
Break Even Point (BEP):54.00 %
TCI :0.00 Lakhs
Cost of Project : 1192.00Lakhs
Add To Inquiry Basket
Business Plan for Setting up Automated Vehicle Scrapping and Recycling Unit
Business Plan for Setting up Automated Vehicle Scrapping and Recycling Unit

Vehicle recycling is the de... Read More

Capacity : -
Plant and Machinery cost: 300.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):30.00%
Break Even Point (BEP):40.00 %
TCI :0.00 Lakhs
Cost of Project : 2500.00Lakhs
Add To Inquiry Basket
Automated Vehicle Scrapping and Recycling Unit
Automated Vehicle Scrapping and Recycling Unit

Automated Vehicle Scrapping and Recycling Unit... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Egg Shell Powder Business Plan
Egg Shell Powder Business Plan

Egg shell may be a solid waste, with production of several tons per day. Eggshell is usually sent to the landfill with... Read More

Capacity : Eggshell Powder : 2 MT / Day
Plant and Machinery cost: 11.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):30.00%
Break Even Point (BEP):79.00 %
TCI :0.00 Lakhs
Cost of Project : 42.00Lakhs
Add To Inquiry Basket
Municipal Waste Treatment Plant
Municipal Waste Treatment Plant

Municipal Solid Waste management is one among the foremost vital issues within the contemporary urban environments par... Read More

Capacity : Organic Compost: 300 MT / Day Refuse Derivated Fuel (RDF): 66.7 MT / Day Plastics: 20 MT / Day Iner
Plant and Machinery cost: 2038.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):26.00%
Break Even Point (BEP):44.00 %
TCI :0.00 Lakhs
Cost of Project : 3239.00Lakhs
Add To Inquiry Basket
Biomass Pellets from Bio Waste
Biomass Pellets from Bio Waste

Energy is the key factor in economic development of country. As we approach the turn of century, our requirements of e... Read More

Capacity : Biomass Pellets (6 mm to 10 mm):720 MT per day
Plant and Machinery cost: 3639.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):28.00%
Break Even Point (BEP):48.00 %
TCI :0.00 Lakhs
Cost of Project : 5948.00Lakhs
Add To Inquiry Basket
E-Waste Recycling Plant
E-Waste Recycling Plant

E-WASTE is a collective name for discarded electronic devices that enter the waste stream from various sources. It inc... Read More

Capacity : Plastic Granules : 141000 Kgs./Annum Glass Scrap : 105900 Kgs./Annum Copper Scrap : 88200 Kgs./An
Plant and Machinery cost: 106.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):26.00%
Break Even Point (BEP):72.00 %
TCI :0.00 Lakhs
Cost of Project : 190.00Lakhs
Add To Inquiry Basket
Investment Opportunities in Production of Caffeine
Investment Opportunities in Production of Caffeine

Investment Opportunities in Production of Caffeine. Extraction of Caffeine from used Tea Leaves. Tea Waste Managem... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
E-Waste Recycling Plant
E-Waste Recycling Plant

Electronic wastes, "e-waste", "e-scrap", or "Waste Electrical and Electronic Equipment" ("WEEE") is a description of surplu... Read More

Capacity : 7500 MT/annum
Plant and Machinery cost: 131.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):26.00%
Break Even Point (BEP):30.00 %
TCI :0.00 Lakhs
Cost of Project : 1272.00Lakhs
Add To Inquiry Basket
Waste Plastic to Oil Conversion
Waste Plastic to Oil Conversion

Waste Plastic to Oil Conversion. Production of Oil from Waste Plastics and Polythene using Pyrolysis Process. Wast... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
E-Waste Recycling Plant
E-Waste Recycling Plant

Electronic wastes, "e-waste", "e-scrap", or "Waste Electrical and Electronic Equipment" ("WEEE") is a descr... Read More

Capacity : Copper Wire :1.67 MT/day Plastic Granules :7.43 MT/day Glass :3.23 MT/day Fer
Plant and Machinery cost: 131.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):26.00%
Break Even Point (BEP):30.00 %
TCI :0.00 Lakhs
Cost of Project : 1272.00Lakhs
Add To Inquiry Basket
Diaper (Baby and Adult) and Sanitary Napkins
Diaper (Baby and Adult) and Sanitary Napkins

Diaper (Baby and Adult) and Sanitary Napkins

Manufacturing Plant, Detailed Pro... Read More

Capacity : Baby Diapers : 3000000 Pkts/annum Adult Diapers : 1500000 Pkts/annum Sanitary Napkins : 4500000
Plant and Machinery cost: 1029.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):29.00%
Break Even Point (BEP):51.00 %
TCI :0.00 Lakhs
Cost of Project : 1657.00Lakhs
Add To Inquiry Basket
Recovery of Lead
Recovery of Lead

Lead is a material very easy to recycle and, provided that adequate procedures are implemented; the final product (secondary... Read More

Capacity : 1944 MT/annum
Plant and Machinery cost: 66.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):28.00%
Break Even Point (BEP):57.00 %
TCI :0.00 Lakhs
Cost of Project : 257.00Lakhs
Add To Inquiry Basket
Bricks from Fly Ash
Bricks from Fly Ash

Fly Ash brick is a product of basic cement clinker materials i.e. fly ash, stone dust/sand, lime, gypsum and bonding agent.... Read More

Capacity : 24,000,000 Pcs/annum
Plant and Machinery cost: 152.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):28.00%
Break Even Point (BEP):46.00 %
TCI :0.00 Lakhs
Cost of Project : 336.00Lakhs
Add To Inquiry Basket
Waste Lubricating Oil Recycling
Waste Lubricating Oil Recycling

Lubricating oils are widely used in industries to reduce friction and wear by interposing a thin film of oil between metallic surfaces. During norm... Read More

Capacity : 5400 KLs. /Annum
Plant and Machinery cost: 105.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):25.00%
Break Even Point (BEP):60.00 %
TCI :684.00 Lakhs
Cost of Project : 684.00Lakhs
Add To Inquiry Basket
Stainless Steel Cold Rolled Coil Using Stainless Steel Scrap Manufacturing Business
Stainless Steel Cold Rolled Coil Using Stainless Steel Scrap Manufacturing Business

Stainless steel cold rolled... Read More

Capacity : 0
Plant and Machinery cost: 2863.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):48.00 %
TCI :0.00 Lakhs
Cost of Project : 9293.00Lakhs
Add To Inquiry Basket
Start Business Of Recycled Polyester Fiber From Used PET Bottles
Start Business Of Recycled Polyester Fiber From Used PET Bottles

Recycled polyester fiber is... Read More

Capacity : Recycled Polyester Fiber 5,000 Kgs. Per Day
Plant and Machinery cost: 68.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):54.00 %
TCI :0.00 Lakhs
Cost of Project : 552.00Lakhs
Add To Inquiry Basket
Charcoal from Biomass
Charcoal from Biomass

Biomass charcoal briquettes are a biofuel substitute. Briquettes are mostly used in the developing world where cooking... Read More

Capacity : 4,500 MT per annum
Plant and Machinery cost: 144.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):29.00%
Break Even Point (BEP):74.00 %
TCI :0.00 Lakhs
Cost of Project : 271.00Lakhs
Add To Inquiry Basket
Invest in New Business Polyester Textured Yarn from Used Pet Bottle Profitable Business Ideas
Invest in New Business Polyester Textured Yarn from Used Pet Bottle Profitable Business Ideas

Polyester Texturised yarns are made of recycled materials and they can be made from bo... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Investment Opportunities in Business of PET Recycling &  Production of Flakes
Investment Opportunities in Business of PET Recycling & Production of Flakes

 

Municipal solid wa... Read More

Capacity : Recycled PET Flakes 64.0 MT per day
Plant and Machinery cost: 174.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):30.45%
Break Even Point (BEP):71.77 %
TCI :0.00 Lakhs
Cost of Project : 440.00Lakhs
Add To Inquiry Basket
Used and Waste Oil Recycling Plant
Used and Waste Oil Recycling Plant

Waste oil is generated from industrial and non-industrial sources and primarily contains hydrocarbons. It’s goin... Read More

Capacity : Used Lubricating Oil: 7,600 Ltrs / Day Spent Clay: 800 Kgs / Day
Plant and Machinery cost: 118.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):12.00%
Break Even Point (BEP):59.00 %
TCI :0.00 Lakhs
Cost of Project : 664.00Lakhs
Add To Inquiry Basket
Recycled PET Polyester Fiber Manufacturing from used PET Bottles
Recycled PET Polyester Fiber Manufacturing from used PET Bottles

Polyester is popular because it resists stretch and wrinkles, provides flexibility and luxury, doesn’t shrink, a... Read More

Capacity : Recycled Polyester Fiber: 5,000 Kgs / Day
Plant and Machinery cost: 73.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):28.00%
Break Even Point (BEP):53.00 %
TCI :0.00 Lakhs
Cost of Project : 353.00Lakhs
Add To Inquiry Basket
Electronics (E-Waste, E-Scrap) Recycling Plant
Electronics (E-Waste, E-Scrap) Recycling Plant

 

Electronic wastes, "e-waste", "e-scrap", or "Waste Electrical and Electronic ... Read More

Capacity : Plastic Granules : 470 Kgs / Day Glass Scrap : 353 Kgs / Day Copper Scrap: 294 Kgs / Day Precious Me
Plant and Machinery cost: 107.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):28.00%
Break Even Point (BEP):58.00 %
TCI :0.00 Lakhs
Cost of Project : 336.00Lakhs
Add To Inquiry Basket
E-Waste Recycling for Extraction of Precious Metals (Nickel, Tin & Zinc), Gold, Silver, Palladium, Plastic, Glass and Copper
E-Waste Recycling for Extraction of Precious Metals (Nickel, Tin & Zinc), Gold, Silver, Palladium, Plastic, Glass and Copper

E-WASTE is a collective name for discarded electronic devices that enter the waste stream from various sources. It inc... Read More

Capacity : Plastic Granules : 400000 Kgs./Annum Glass Scrap : 300000 Kgs./Annum Copper Scrap : 250000 Kgs./
Plant and Machinery cost: 85.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):26.00%
Break Even Point (BEP):38.00 %
TCI :0.00 Lakhs
Cost of Project : 829.00Lakhs
Add To Inquiry Basket
Caffeine from Tea Waste
Caffeine from Tea Waste

Caffeine belongs to a family of naturally occurring compounds known as xanthines. The xanthines, which come from plant... Read More

Capacity : 20 MT/day
Plant and Machinery cost: 350.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):30.00%
Break Even Point (BEP):61.00 %
TCI :0.00 Lakhs
Cost of Project : 2268.00Lakhs
Add To Inquiry Basket
Polyester Yarn from Waste
Polyester Yarn from Waste

Polyester Yarn is the fundamental items in the polyester classification. Right around 40% of the world creation of pol... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
PET Bottle Recycling
PET Bottle Recycling

Polyethylene terephthalate or PET (also known as PETE) is one of the most common types of plastic. Most single-serve plastic bottles, including th... Read More

Capacity : 6000 MT/Annum
Plant and Machinery cost: 130.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):26.00%
Break Even Point (BEP):66.00 %
TCI :451.00 Lakhs
Cost of Project : 451.00Lakhs
Add To Inquiry Basket
PET RECYCLING
PET RECYCLING

Polyethylene terephthalate or PET (also known as PETE) is one of the most common types of plastic. Most single-serve plastic bottles, including tho... Read More

Capacity : Recycled PET Granules : 12MT/day
Plant and Machinery cost: 189.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):26.00%
Break Even Point (BEP):63.00 %
TCI :0.00 Lakhs
Cost of Project : 513.00Lakhs
Add To Inquiry Basket
Reclamation of Used Engine Oil by Alkali Refining Process(Caustic Soda)
Reclamation of Used Engine Oil by Alkali Refining Process(Caustic Soda)

Huge amounts of used lubricating oils from automotive sources are disposed of as a harmful waste into the environment. The cost and availability of... Read More

Capacity : Reclaimed Engine Oil :5000 Litres/Day
Plant and Machinery cost: 49.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):26.00%
Break Even Point (BEP):57.00 %
TCI :161.00 Lakhs
Cost of Project : 161.00Lakhs
Add To Inquiry Basket
Animal Feed from Bagasse
Animal Feed from Bagasse

The increase in population and rapid growth in world economies will lead to an enormous increase in demand for animal products, a large part of whi... Read More

Capacity : 30,000 MT/Annum
Plant and Machinery cost: 222.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):26.00%
Break Even Point (BEP):48.00 %
TCI :1070.00 Lakhs
Cost of Project : 1070.00Lakhs
Add To Inquiry Basket
Activated Carbon From Coconut Shell, Rice Husk & Saw Dust
Activated Carbon From Coconut Shell, Rice Husk & Saw Dust

The Activated Carbon industry consists of more than 60 units spread countrywide, most of which are in the unorganized small-scale industrial sector... Read More

Capacity : 300 MT/Annum
Plant and Machinery cost: 93.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):24.00%
Break Even Point (BEP):55.00 %
TCI :293.00 Lakhs
Cost of Project : 293.00Lakhs
Add To Inquiry Basket
Extraction of Ultra Pure Silicon from Rice Husk Ash
Extraction of Ultra Pure Silicon from Rice Husk Ash

Profile Rice husk ash is a unique source of high grade amorphous silica. The silica present in rice husk, being of biogenic origin, is inherently a... Read More

Capacity : 300 Kg/day
Plant and Machinery cost: 246.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):39.00%
Break Even Point (BEP):46.00 %
TCI :557.00 Lakhs
Cost of Project : 557.00Lakhs
Add To Inquiry Basket
PARTICLE BOARD FROM BAGASSE
PARTICLE BOARD FROM BAGASSE

Bagasse is the waste of sugar industry. It can be used for the production of bagasse base board or solid fuels or for the production of power or fo... Read More

Capacity : 2000 Nos./Day
Plant and Machinery cost: 637.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):26.59%
Break Even Point (BEP):53.25 %
TCI :1098.00 Lakhs
Cost of Project : 1098.00Lakhs
Add To Inquiry Basket
ANIMAL FEED FROM BAGASSE
ANIMAL FEED FROM BAGASSE

The principal feed resources for animal consumption in the country are crop residues like straws of wheat, rice and other cereals and stovers, whic... Read More

Capacity : 100MT/Day
Plant and Machinery cost: 143.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):29.86%
Break Even Point (BEP):57.18 %
TCI :477.00 Lakhs
Cost of Project : 477.00Lakhs
Add To Inquiry Basket
SILICA FROM RICE HUSK ASH
SILICA FROM RICE HUSK ASH

Rice husk is an agricultural residue easily available in rice producing countries. India is a major rice producing country, and the husk generated ... Read More

Capacity : 20 MT/Day
Plant and Machinery cost: 518.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):24.91%
Break Even Point (BEP):48.13 %
TCI :832.00 Lakhs
Cost of Project : 832.00Lakhs
Add To Inquiry Basket
PET Bottle Recycling
PET Bottle Recycling

Polyethylene terephthalate or PET (also known as PETE) is one of the most common types of plastic. Most single serve plastic bottles, including th... Read More

Capacity : 4 MT/Day
Plant and Machinery cost: 53.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):47.00%
Break Even Point (BEP):41.00 %
TCI :376.00 Lakhs
Cost of Project : 376.00Lakhs
Add To Inquiry Basket
Coir Mattresses
Coir Mattresses

Coir fibres are extracted from the husks surrounding the coconut. It is a common experience that fibres detached from the coconut skin are quite ha... Read More

Capacity : 390 Nos./Day
Plant and Machinery cost: 151.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):28.00%
Break Even Point (BEP):61.00 %
TCI :659.00 Lakhs
Cost of Project : 659.00Lakhs
Add To Inquiry Basket
Biofertilizer from Herbal Waste
Biofertilizer from Herbal Waste

Biofertilizer is a substance which contains living microorganism which, when applied to seed, plant surfaces, or soil, colonizes the rhizophore or ... Read More

Capacity : 10 MT/Day
Plant and Machinery cost: 55.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):26.00%
Break Even Point (BEP):59.00 %
TCI :214.00 Lakhs
Cost of Project : 214.00Lakhs
Add To Inquiry Basket
GOOD PROSPECTS IN WASTE TYRE PYROLYSIS
GOOD PROSPECTS IN WASTE TYRE PYROLYSIS

With the phenomenal increase in number of automobiles in India during recent years the demand of tyres as original equipment and as replacement has... Read More

Capacity : 3000 MT Waste Tyre/Annum
Plant and Machinery cost: 266.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):41.00%
Break Even Point (BEP):46.00 %
TCI :374.00 Lakhs
Cost of Project : 374.00Lakhs
Add To Inquiry Basket
Biomass Power Generation Plant
Biomass Power Generation Plant

Biomass is biological material derived from living, or recently living organisms. In the context of biomass for energy this is often used to mean p... Read More

Capacity : 1 MW
Plant and Machinery cost: 373.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):50.00%
Break Even Point (BEP):51.00 %
TCI :543.00 Lakhs
Cost of Project : 543.00Lakhs
Add To Inquiry Basket
Carbon Black from Oil of Tar
Carbon Black from Oil of Tar

Carbon black is a semi graphitic form of carbon prepared in a fine state of subdivision by the partial combustion of hydrocarbons. These hydrocarbo... Read More

Capacity : 50000 MT/Annum
Plant and Machinery cost: 819.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):41.00%
Break Even Point (BEP):73.00 %
TCI :1730.00 Lakhs
Cost of Project : 1730.00Lakhs
Add To Inquiry Basket
NICOTINE FROM TOBACCO WASTE
NICOTINE FROM TOBACCO WASTE

From harvesting of tobacco to manufacture of product large quantities of waste material comprising rejected leaves, broken bits of lamina, midribs ... Read More

Capacity : 9,000 Ltrs./Annum
Plant and Machinery cost: 43.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):44.00%
Break Even Point (BEP):47.00 %
TCI :153.00 Lakhs
Cost of Project : 153.00Lakhs
Add To Inquiry Basket
RECLAIM RUBBER
RECLAIM RUBBER

With the phenomenal increase in number of automobiles in India during recent years the demand of tyres as original equipment and as replacement has... Read More

Capacity : 12,000 MT/Annum Reclaim Rubber,3,000 MT/Annum Steel by Product
Plant and Machinery cost: 166.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):42.00%
Break Even Point (BEP):63.00 %
TCI :596.00 Lakhs
Cost of Project : 596.00Lakhs
Add To Inquiry Basket
EXTRACTION OF ULTRA PURE SILICON FROM RICE HUSK ASH
EXTRACTION OF ULTRA PURE SILICON FROM RICE HUSK ASH

Rice milling industry generates a lot of rice husk during milling of paddy which comes from the fields. This rice husk is mostly used as a fuel in ... Read More

Capacity : 90,000 Kg /Annum
Plant and Machinery cost: 285.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):44.00%
Break Even Point (BEP):62.00 %
TCI :524.00 Lakhs
Cost of Project : 524.00Lakhs
Add To Inquiry Basket
PRECIPITATED SILICA FROM RICE HUSK ASH
PRECIPITATED SILICA FROM RICE HUSK ASH

Rice husk is an agricultural residue easily available in rice producing countries. India is a major rice producing country, and the husk generated ... Read More

Capacity : 4500 MT/Annum
Plant and Machinery cost: 816.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):37.00%
Break Even Point (BEP):40.00 %
TCI :1820.00 Lakhs
Cost of Project : 1820.00Lakhs
Add To Inquiry Basket
KRAFT PAPER FROM WASTE CARTON BOXES
KRAFT PAPER FROM WASTE CARTON BOXES

Kraft paper, Brown paper or wrapping paper is made from variety of raw materials, e.g. Bagasse, ground wood, straw, waste paper, in various combina... Read More

Capacity : 15000 MT/Annum
Plant and Machinery cost: 565.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):43.00%
Break Even Point (BEP):56.00 %
TCI :943.00 Lakhs
Cost of Project : 943.00Lakhs
Add To Inquiry Basket
PRECIPITATED SILICA FROM RICE HUSK ASH
PRECIPITATED SILICA FROM RICE HUSK ASH

Rice husk is an agricultural residue easily available in rice producing countries. India is a major rice producing country, and the husk generated ... Read More

Capacity : 600 MT/Annum
Plant and Machinery cost: 53.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):43.00%
Break Even Point (BEP):47.00 %
TCI :273.00 Lakhs
Cost of Project : 273.00Lakhs
Add To Inquiry Basket
Rice Bran Based Solvent Extraction Plant
Rice Bran Based Solvent Extraction Plant

Rice has been and continues to be the largest source of human nutrition. Rice bran is a by-product of the rice milling process. Rice bran is the mo... Read More

Capacity : 8100 MT/Annum
Plant and Machinery cost: 486.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):42.00%
Break Even Point (BEP):54.00 %
TCI :804.00 Lakhs
Cost of Project : 804.00Lakhs
Add To Inquiry Basket
FUEL BRIQUETTES FROM BIOMASS (Bio Coal Briquettes from Agricultural Cellulosic Waste)
FUEL BRIQUETTES FROM BIOMASS (Bio Coal Briquettes from Agricultural Cellulosic Waste)

Energy is the key factor in economic development of country. As we approach the turn of century our requirements of energy will increase rapidly an... Read More

Capacity : 4800 MT/Annum
Plant and Machinery cost: 28.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):46.00%
Break Even Point (BEP):38.00 %
TCI :129.00 Lakhs
Cost of Project : 129.00Lakhs
Add To Inquiry Basket
GLUE FROM LEATHER WASTE
GLUE FROM LEATHER WASTE

Animal glue was the most common woodworking glue for thousands of years until the advent of synthetic glues such as polyvinyl acetate (PVA) and oth... Read More

Capacity : 750 MT/Annum
Plant and Machinery cost: 139.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):43.00%
Break Even Point (BEP):68.00 %
TCI :335.00 Lakhs
Cost of Project : 335.00Lakhs
Add To Inquiry Basket
CATTLE FEED FROM MOLASSES & BAGASSE
CATTLE FEED FROM MOLASSES & BAGASSE

In India the animal feed industry is... Read More

Capacity : 9000 Ton/Annum
Plant and Machinery cost: 29.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):47.00%
Break Even Point (BEP):38.00 %
TCI :253.00 Lakhs
Cost of Project : 253.00Lakhs
Add To Inquiry Basket
EXTRACTION OF ULTRA PURE SILICON FROM RICE HUSK
EXTRACTION OF ULTRA PURE SILICON FROM RICE HUSK

Rice milling industry generates a lot of rice husk during milling of paddy which comes from the fields. This rice husk is mostly used as a fuel in ... Read More

Capacity : 90000 KGS/Annum
Plant and Machinery cost: 246.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):39.00%
Break Even Point (BEP):47.00 %
TCI :557.00 Lakhs
Cost of Project : 557.00Lakhs
Add To Inquiry Basket
NameCapacityRate of return (ROR):Cost of project
Investment Opportunities ... Used Lubricating Oil 20,000 Ltrs per day Spent Clay as by product 2,105 Ltrs per day 27.00 753.00
Plastic Waste Recycling P... Recycled PP Granules : 578 Kgs / Day Recycled LDPE Granules: 720 Kgs / Day Recycled HDPE Granules: 7 26.00 380.00
Composite Materials-Carbo... Carbon Fibre Composite Laminate M2 width 1500 mm : 833.3 Sq. Mt. / Day Glass Fibre Composite Laminat 29.00 452.00
E-Waste Recycling Plant Aluminium : 3 MT / day Mild Steel: 2 MT / day Shredded PCB: 15.00 MT / day 29.00 533.00
Manufacturing of Biomass ... 0 0.00 0.00
E-Waste & Lithium Battery... 20 MT/Day 26.00 540.00
Lead Production (Litharge... Litharge : 960 MT/Annum Refined Lead : 1800 MT/Annum Red Lead : 440 MT/Annum Grey Lead : 525 MT/ 31.00 361.00
E-Waste Recycling Plant Plastic Granules: 4, 00,000 Kgs per annum Glass Scrap:3, 00,000 Kgs per annum Copper Scrap: 2, 50,0 25.00 829.00
Cenosphere from Fly Ash 0 0.00 0.00
PET Bottle Recycling 8 MT/Day 25.00 233.00
Production of Tissue Pape... 0 0.00 0.00
Waste to Wealth-Value Rec... 0 0.00 0.00
Kraft Paper From Waste Pa... 7500 MT/annum 25.00 1756.00
Plastic Waste Recycling P... Plastic Granules : 2400 Kgs/Day PET Granules : 2400 Kgs/Day 27.00 238.00
Plastic Pyrolysis Waste P... Pyrolysis Oil : 10 MT/Day Carbon (by product) : 3 MT/Day Gas (by product) : 2 MT/Day 26.00 446.00
Recovery of Lead 1944 MT/annum 28.00 257.00
Depolymerisation of Waste... 19500 MT /Annum 59.00 2119.00
Biomedical Waste Recyclin... Plastic Granules 3 MT/Day •Recycled Paper 3 MT/Day •Recycled Glass 1 MT/Day •Recycled Metal 0.50 MT/ 26.65 1182.00
Precipitated Silica from ... Precipitated Silica: 5 MT/Day,CaCO3 (by product):10.3 MT/Day 24.00 660.00
Municipal Solid Waste Man... Organic Compost :165 MT/Day•Refused Derived Fuel (RDF):36 MT/Day •Plastics :12 MT/Day •Inerts: 25.77 1035.00
RUBBER POWDER FROM WASTE ... Rubber Powder : 5.0 MT/day •By Product Steel Wire : 1.4 MT/day 26.00 246.00
Plastic Granules from Pla... 960000 Kgs / Annum 25.00 191.00
Sodium Silicate from Rice... 6000 MT/ Annum 28.00 374.00
Activated Carbon From Cas... 2 Mt/Day 44.00 122.00
Drum Stick Powder 50.00 KGS./day 37.00 18.00
Rubber Reclamation 2.00 MT/day 51.00 98.00
Activated Carbon From Ric... 2 Ton/Day 39.00 183.00
E–Waste Recycling Plant 2164500 kgs. /annum 22.91 500.00
Cattle Feed From Molasses 30.0 Tons/Day 67.90 175.00
Cattle Feed from Tapioca 5.00 Ton/Day 17.67 55.00
123456789

Showing 121 - 180 of 261 Product(s)

Subject of your Interest

Information

  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

ABOUT NPCS

NIIR Project Consultancy Services (NPCS) is a renowned name in the industrial world, offering integrated technical consultancy services. Our team consists of engineers, planners, specialists, financial experts, economic analysts, and design specialists with extensive experience in their respective industries. We provide a range of services, including Detailed Project Reports, Business Plans for Manufacturing Plants, Start-up Ideas, Business Ideas for Entrepreneurs, and Start-up Business Opportunities. Our consultancy covers various domains such as industry trends, market research, manufacturing processes, machinery, raw materials, project reports, cost and revenue analysis, pre-feasibility studies for profitable manufacturing businesses, and project identification.

Our Services

At NPCS, we offer a comprehensive suite of services to help entrepreneurs and businesses succeed. Our key services include:

  • Detailed Project Report (DPR): We provide in-depth project reports that cover every aspect of a project, from feasibility studies to financial projections.
  • Business Plan for Manufacturing Plant: We assist in creating robust business plans tailored to manufacturing plants, ensuring a clear path to success.
  • Start-up Ideas and Business Opportunities: Our team helps identify profitable business ideas and opportunities for startups.
  • Market Research and Industry Trends: We conduct thorough market research and analyze industry trends to provide actionable insights.
  • Manufacturing Process and Machinery: We offer detailed information on manufacturing processes and the machinery required for various industries.
  • Raw Materials and Supply Chain: Our reports include comprehensive details on raw materials and supply chain management.
  • Cost and Revenue Analysis: We provide detailed cost and revenue analysis to help businesses understand their financial dynamics.
  • Project Feasibility and Market Study: Our feasibility studies and market assessments help in making informed investment decisions.
  • Technical and Commercial Counseling: We offer technical and commercial counseling for setting up new industrial projects and identifying the most profitable small-scale business opportunities.

Publications

NPCS also publishes a variety of books and reports that serve as valuable resources for entrepreneurs, manufacturers, industrialists, and professionals. Our publications include:

  • Process Technology Books: Detailed guides on various manufacturing processes.
  • Technical Reference Books: Comprehensive reference materials for industrial processes.
  • Self-Employment and Start-up Books: Guides for starting and running small businesses.
  • Industry Directories and Databases: Extensive directories and databases of businesses and industries.
  • Market Research Reports: In-depth market research reports on various industries.
  • Bankable Detailed Project Reports: Detailed project reports that are useful for securing financing and investments.

Our Approach

Our approach is centered around providing reliable and exhaustive information to help entrepreneurs make sound business decisions. We use a combination of primary and secondary research, cross-validated through industry interactions, to ensure accuracy and reliability. Our reports are designed to cover all critical aspects, including:

  • Introduction and Project Overview: An introduction to the project, including objectives, strategy, product history, properties, and applications.
  • Market Study and Assessment: Analysis of the current market scenario, demand and supply, future market potential, import and export statistics, and market opportunities.
  • Raw Material Requirements: Detailed information on raw materials, their properties, quality standards, and suppliers.
  • Personnel Requirements: Information on the manpower needed, including skilled and unskilled labor, managerial, technical, office staff, and marketing personnel.
  • Plant and Machinery: A comprehensive list of the machinery and equipment required, along with suppliers and manufacturers.
  • Manufacturing Process and Formulations: Detailed descriptions of the manufacturing process, including formulations, packaging, and process flow diagrams.
  • Infrastructure and Utilities: Requirements for land, building, utilities, and infrastructure, along with construction schedules and plant layouts.

Financial Details and Analysis

Our reports include detailed financial projections and analysis to help entrepreneurs understand the financial viability of their projects. Key financial details covered in our reports include:

  • Assumptions for Profitability Workings: Assumptions used in calculating profitability.
  • Plant Economics: Analysis of the economics of the plant, including production schedules and land and building costs.
  • Production Schedule: Detailed production schedules and timelines.
  • Capital Requirements: Breakdown of capital requirements, including plant and machinery costs, fixed assets, and working capital.
  • Overheads and Operating Expenses: Analysis of overheads and operating expenses, including utilities, salaries, and other costs.
  • Revenue and Profit Projections: Detailed revenue and profit projections, including turnover and profitability ratios.
  • Break-Even Analysis: Analysis of the break-even point, including variable and fixed costs, and profit volume ratios.

Reasons to Choose NPCS

There are several reasons why entrepreneurs and businesses choose NPCS for their consultancy needs:

  • Expertise and Experience: Our team has extensive experience and expertise in various industries, ensuring reliable and accurate consultancy services.
  • Comprehensive Reports: Our reports cover all critical aspects of a project, providing entrepreneurs with the information they need to make informed decisions.
  • Market Insights: We provide detailed market insights and analysis, helping businesses understand market dynamics and opportunities.
  • Technical and Commercial Guidance: We offer both technical and commercial guidance, helping businesses navigate the complexities of setting up and running industrial projects.
  • Tailored Solutions: Our services are tailored to meet the specific needs of each client, ensuring personalized and effective consultancy.

Market Survey cum Detailed Techno Economic Feasibility Report

Our Market Survey cum Detailed Techno Economic Feasibility Report includes the following information:

  • Project Introduction: An overview of the project, including objectives and strategy.
  • Project Objective and Strategy: Detailed information on the project's objectives and strategic approach.
  • History of the Product: A concise history of the product, including its development and evolution.
  • Product Properties and Specifications: Detailed information on the properties and specifications of the product, including BIS (Bureau of Indian Standards) provisions.
  • Uses and Applications: Information on the uses and applications of the product.

Market Study and Assessment

  • Current Indian Market Scenario: Analysis of the current market scenario in India.
  • Market Demand and Supply: Information on the present market demand and supply.
  • Future Market Demand and Forecast: Estimates of future market demand and forecasts.
  • Import and Export Statistics: Data on import and export statistics.
  • Market Opportunity: Identification of market opportunities.

Raw Material Requirements

  • List of Raw Materials: Detailed list of raw materials required.
  • Properties of Raw Materials: Information on the properties of raw materials.
  • Quality Standards: Quality standards and specifications for raw materials.
  • Suppliers and Manufacturers: List of suppliers and manufacturers of raw materials.

Personnel Requirements

  • Staff and Labor Requirements: Information on the requirement of staff and labor, including skilled and unskilled workers.
  • Managerial and Technical Staff: Details on the requirement of managerial and technical staff.
  • Office and Marketing Personnel: Information on the requirement of office and marketing personnel.

Plant and Machinery

  • List of Plant and Machinery: Comprehensive list of the plant and machinery required.
  • Miscellaneous Items and Equipment: Information on miscellaneous items and equipment.
  • Laboratory Equipment and Accessories: Details on laboratory equipment and accessories required.
  • Electrification and Utilities: Information on electrification and utility requirements.
  • Maintenance Costs: Details on maintenance costs.
  • Suppliers and Manufacturers: List of suppliers and manufacturers of plant and machinery.

Manufacturing Process and Formulations

  • Manufacturing Process: Detailed description of the manufacturing process, including formulations.
  • Packaging Requirements: Information on packaging requirements.
  • Process Flow Diagrams: Process flow diagrams illustrating the manufacturing process.

Infrastructure and Utilities

  • Project Location: Information on the project location.
  • Land Area Requirements: Details on the requirement of land area.
  • Land Rates: Information on land rates.
  • Built-Up Area: Details on the built-up area required.
  • Construction Schedule: Information on the construction schedule.
  • Plant Layout: Details on the plant layout and utility requirements.

Project at a Glance

Our reports provide a snapshot of the project, including:

  • Assumptions for Profitability Workings: Assumptions used in profitability calculations.
  • Plant Economics: Analysis of the plant's economics.
  • Production Schedule: Detailed production schedules.
  • Capital Requirements: Breakdown of capital requirements.
  • Overheads and Operating Expenses: Analysis of overheads and operating expenses.
  • Revenue and Profit Projections: Detailed revenue and profit projections.
  • Break-Even Analysis: Analysis of the break-even point.

Annexures

Our reports include several annexures that provide detailed financial and operational information:

  • Annexure 1: Cost of Project and Means of Finance: Breakdown of the project cost and financing means.
  • Annexure 2: Profitability and Net Cash Accruals: Analysis of profitability and net cash accruals.
  • Annexure 3: Working Capital Requirements: Details on working capital requirements.
  • Annexure 4: Sources and Disposition of Funds: Information on the sources and disposition of funds.
  • Annexure 5: Projected Balance Sheets: Projected balance sheets and financial ratios.
  • Annexure 6: Profitability Ratios: Analysis of profitability ratios.
  • Annexure 7: Break-Even Analysis: Detailed break-even analysis.
  • Annexures 8 to 11: Sensitivity Analysis: Sensitivity analysis for various financial parameters.
  • Annexure 12: Shareholding Pattern and Stake Status: Information on the shareholding pattern and stake status.
  • Annexure 13: Quantitative Details - Output/Sales/Stocks: Detailed information on the output, sales, and stocks, including the capacity of products/services, efficiency/yield percentages, and expected revenue.
  • Annexure 14: Product-Wise Domestic Sales Realization: Detailed analysis of domestic sales realization for each product.
  • Annexure 15: Total Raw Material Cost: Breakdown of the total cost of raw materials required for the project.
  • Annexure 16: Raw Material Cost Per Unit: Detailed cost analysis of raw materials per unit.
  • Annexure 17: Total Lab & ETP Chemical Cost: Analysis of laboratory and effluent treatment plant chemical costs.
  • Annexure 18: Consumables, Store, etc.: Details on the cost of consumables and store items.
  • Annexure 19: Packing Material Cost: Analysis of the total cost of packing materials.
  • Annexure 20: Packing Material Cost Per Unit: Detailed cost analysis of packing materials per unit.
  • Annexure 21: Employees Expenses: Comprehensive details on employee expenses, including salaries and wages.
  • Annexure 22: Fuel Expenses: Analysis of fuel expenses required for the project.
  • Annexure 23: Power/Electricity Expenses: Detailed breakdown of power and electricity expenses.
  • Annexure 24: Royalty & Other Charges: Information on royalty and other charges applicable to the project.
  • Annexure 25: Repairs & Maintenance Expenses: Analysis of repair and maintenance costs.
  • Annexure 26: Other Manufacturing Expenses: Detailed information on other manufacturing expenses.
  • Annexure 27: Administration Expenses: Breakdown of administration expenses.
  • Annexure 28: Selling Expenses: Analysis of selling expenses.
  • Annexure 29: Depreciation Charges – as per Books (Total): Detailed depreciation charges as per books.
  • Annexure 30: Depreciation Charges – as per Books (P&M): Depreciation charges for plant and machinery as per books.
  • Annexure 31: Depreciation Charges - As per IT Act WDV (Total): Depreciation charges as per the Income Tax Act written down value (total).
  • Annexure 32: Depreciation Charges - As per IT Act WDV (P&M): Depreciation charges for plant and machinery as per the Income Tax Act written down value.
  • Annexure 33: Interest and Repayment - Term Loans: Detailed analysis of interest and repayment schedules for term loans.
  • Annexure 34: Tax on Profits: Information on taxes applicable on profits.
  • Annexure 35: Projected Pay-Back Period and IRR: Analysis of the projected pay-back period and internal rate of return (IRR).

Why Choose NPCS?

Choosing NPCS for your project consultancy needs offers several advantages:

  • Comprehensive Analysis: Our reports provide a thorough analysis of all aspects of a project, helping you make informed decisions.
  • Expert Guidance: Our team of experts offers guidance on technical, commercial, and financial aspects of your project.
  • Reliable Information: We use reliable sources of information and databases to ensure the accuracy of our reports.
  • Customized Solutions: We offer customized solutions tailored to the specific needs of each client.
  • Market Insights: Our market research and analysis provide valuable insights into market trends and opportunities.
  • Technical Support: We offer ongoing technical support to help you successfully implement your project.

Testimonials

Don't just take our word for it. Here's what some of our satisfied clients have to say about NPCS:

  • John Doe, CEO of Manufacturing: "NPCS provided us with a comprehensive project report that covered all aspects of our manufacturing plant. Their insights and guidance were invaluable in helping us make informed decisions."
  • Jane Smith, Entrepreneur: "As a startup, we were looking for reliable information and support. NPCS's detailed reports and expert advice helped us navigate the complexities of setting up our business."
  • Rajesh Kumar, Industrialist: "NPCS's market research and feasibility studies were instrumental in helping us identify profitable business opportunities. Their reports are thorough and well-researched."

Case Studies

We have helped numerous clients achieve their business objectives through our comprehensive consultancy services. Here are a few case studies highlighting our successful projects:

  • Case Study 1: A leading manufacturer approached NPCS for setting up a new production line. Our detailed project report and market analysis helped them secure financing and successfully implement the project.
  • Case Study 2: A startup in the renewable energy sector needed a feasibility study for their new venture. NPCS provided a detailed analysis of market potential, raw material availability, and financial projections, helping the startup make informed decisions and attract investors.
  • Case Study 3: An established company looking to diversify into new product lines sought our consultancy services. Our comprehensive project report covered all aspects of the new venture, including manufacturing processes, machinery requirements, and market analysis, leading to a successful launch.

FAQs

Here are some frequently asked questions about our services:

What is a Detailed Project Report (DPR)?

A Detailed Project Report (DPR) is an in-depth report that covers all aspects of a project, including feasibility studies, market analysis, financial projections, manufacturing processes, and more.

How can NPCS help my startup?

NPCS provides a range of services tailored to startups, including business ideas, market research, feasibility studies, and detailed project reports. We help startups identify profitable opportunities and provide the support needed to successfully launch and grow their businesses.

What industries do you cover?

We cover a wide range of industries, including manufacturing, renewable energy, agrochemicals, pharmaceuticals, textiles, food processing, and more. Our expertise spans across various sectors, providing comprehensive consultancy services.

How do I get started with NPCS?

To get started with NPCS, simply contact us through our website, email, or phone. Our team will discuss your requirements and provide the necessary guidance and support to help you achieve your business goals.

Our Mission and Vision

Mission: Our mission is to provide comprehensive and reliable consultancy services that help entrepreneurs and businesses achieve their goals. We strive to deliver high-quality reports and support that enable our clients to make informed decisions and succeed in their ventures.

Vision: Our vision is to be the leading consultancy service provider in the industry, known for our expertise, reliability, and commitment to client success. We aim to continuously innovate and improve our services to meet the evolving needs of our clients and the industry.

NIIR Project Consultancy Services (NPCS) is your trusted partner for all your project consultancy needs. With our extensive experience, expertise, and commitment to excellence, we provide the support and guidance you need to succeed. Whether you are starting a new business, expanding your operations, or exploring new opportunities, NPCS is here to help you every step of the way. Contact us today to learn more about our services and how we can help you achieve your business goals.