Waste managementis the collection, transport, processing, recycling or disposal, and monitoring of waste materials. Concern over environment is being seen a massive increase in recycling globally which has grown to be an important part of modern civilization. The consumption habitsof modern consumerist lifestyles are causing a huge global waste problem.  Industrialization and economic growth has produced more amounts of waste, including hazardous and toxic wastes. There is a growing realization of the negative impacts that wastes have had on the local environment (air, water, land, human health etc.)

Waste management is the collection of all thrown away materials in order to recycle them and as a result decrease their effects on our health, our surroundings and the environment and enhance the quality of life.Waste management practices differ for developed and developing nations, for urban and rural areas, and for residential and industrial producers.Waste Management flows in a cycle: monitoring, collection, transportation, processing, disposal or recycle. Through these steps a company can effectively and responsibly manage waste output and their positive effect they have on the environment.

Waste generation per capita has increased and is expected to continue to climb with growing population, wealth, and consumerism throughout the world. Approaches to solving this waste problem in a scalable and sustainable manner would lead us to a model that uses waste as an input in the production of commodities and value monetized, making waste management a true profit center. The conversion of waste as a potential source of energy has a value as a supplemental feedstock for the rapidly developing bio-fuels sector. A variety of new technologies are being used and developed for the production of biofuels which are capable of converting wastes into heat, power, fuels or chemical feedstock.

Thermal Technologies like gasification, pyrolysis, thermal depolymerization, plasma arc gasification, and non–thermal technologies like anaerobic digestion, fermentation etc are a number of new and emerging technologies that are able to produce energy from waste and other fuels without direct combustion.Biodegradable wastes are  processed by composting, vermi-composting, anaerobic digestion or any other appropriate biological processing for the stabilization of wastes. Recycling of materials like plastics, paper and metals should be done for future use.

There is a clear need for the current approach of waste disposal in India that is focussed on municipalities and uses high energy/high technology, to move more towards waste processing and waste recycling (that involves public-private partnerships, aiming for eventual waste minimization - driven at the community level, and using low energy/low technology resources.



We can provide you detailed project reports on the following topics. Please select the projects of your interests.
Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the ost of raw material, formulating the cash flow statement, projecting the balance sheet etc.
We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics. Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.


We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Add multiple items to inquiry

Select the items and then press Add to inquiry button

Sort by :
Activated Carbon From Cashew Nut Shell
Activated Carbon From Cashew Nut Shell

Carbon is probably the most widely distributed element in nature. It occurs in two allotropic crystalline forms, viz. Graphite (hexagonal system) a... Read More

Capacity : 2 Mt/Day
Plant and Machinery cost: 34.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):44.00%
Break Even Point (BEP):48.00 %
TCI :122.00 Lakhs
Cost of Project : 122.00Lakhs
Add To Inquiry Basket
Drum Stick Powder
Drum Stick Powder

Drum stick powder is basically a by product of poultry processing unit. Hen legs are collected in polystyrene tray and then it is dried by chain co... Read More

Capacity : 50.00 KGS./day
Plant and Machinery cost: 6.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):37.00%
Break Even Point (BEP):53.00 %
TCI :18.00 Lakhs
Cost of Project : 18.00Lakhs
Add To Inquiry Basket
Rubber Reclamation
Rubber Reclamation

Reclaimed rubber is manufactured out of discarded tyres and tubes and other wastes of rubber products. A fully reclaimed rubber is completely solub... Read More

Capacity : 2.00 MT/day
Plant and Machinery cost: 33.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):51.00%
Break Even Point (BEP):43.00 %
TCI :98.00 Lakhs
Cost of Project : 98.00Lakhs
Add To Inquiry Basket
Activated Carbon From Rice Husk, Saw Dust & Coconut Shell
Activated Carbon From Rice Husk, Saw Dust & Coconut Shell

Carbon is probably the most widely distributed element in nature. Activated carbon from rice husk has been developed & finding wider uses. Ther... Read More

Capacity : 2 Ton/Day
Plant and Machinery cost: 41.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):39.00%
Break Even Point (BEP):43.00 %
TCI :183.00 Lakhs
Cost of Project : 183.00Lakhs
Add To Inquiry Basket
Plastic Waste Recycling Plant – Business Plan
Plastic Waste Recycling Plant – Business Plan

 

Waste is now a global problem, and one that must be addressed in order to so... Read More

Capacity : Recycled PP Granules : 578 Kgs / Day Recycled LDPE Granules: 720 Kgs / Day Recycled HDPE Granules: 7
Plant and Machinery cost: 144.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):26.00%
Break Even Point (BEP):68.00 %
TCI :0.00 Lakhs
Cost of Project : 380.00Lakhs
Add To Inquiry Basket
Composite Materials-Carbon Fibre Composites & Glass Fibre Composites
Composite Materials-Carbon Fibre Composites & Glass Fibre Composites

A material is composed of a minimum of two materials, which combine to offer proper... Read More

Capacity : Carbon Fibre Composite Laminate M2 width 1500 mm : 833.3 Sq. Mt. / Day Glass Fibre Composite Laminat
Plant and Machinery cost: 115.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):29.00%
Break Even Point (BEP):67.00 %
TCI :0.00 Lakhs
Cost of Project : 452.00Lakhs
Add To Inquiry Basket
Investment Opportunities in Waste Lubricating Oil  Recycling Plant
Investment Opportunities in Waste Lubricating Oil Recycling Plant

 

Waste oil is made... Read More

Capacity : Used Lubricating Oil 20,000 Ltrs per day Spent Clay as by product 2,105 Ltrs per day
Plant and Machinery cost: 127.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):50.00 %
TCI :0.00 Lakhs
Cost of Project : 753.00Lakhs
Add To Inquiry Basket
E-Waste Recycling Plant
E-Waste Recycling Plant

Electronic wastes, "e-waste", "e-scrap", or "Waste Electrical and Electronic Equipment" ("WEEE") is a descriptio... Read More

Capacity : Aluminium : 3 MT / day Mild Steel: 2 MT / day Shredded PCB: 15.00 MT / day
Plant and Machinery cost: 88.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):29.00%
Break Even Point (BEP):59.00 %
TCI :0.00 Lakhs
Cost of Project : 533.00Lakhs
Add To Inquiry Basket
Manufacturing of Biomass Briquettes from Biowaste.
Manufacturing of Biomass Briquettes from Biowaste.

Manufacturing of Biomass Briquettes from Biowaste. Profitable Investment in Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
E-Waste Recycling Plant
E-Waste Recycling Plant

Electronic waste may be defined as discarded computers, mobile phones, office electronic equipment’s, entertainm... Read More

Capacity : Plastic Granules: 4, 00,000 Kgs per annum Glass Scrap:3, 00,000 Kgs per annum Copper Scrap: 2, 50,0
Plant and Machinery cost: 86.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):25.00%
Break Even Point (BEP):37.00 %
TCI :0.00 Lakhs
Cost of Project : 829.00Lakhs
Add To Inquiry Basket
Lead Production (Litharge, Refined Lead, Red Lead & Grey Lead)
Lead Production (Litharge, Refined Lead, Red Lead & Grey Lead)

Lead is a relatively soft metal with bluish-white lusture but on exposure to air, it becomes covered by a dull, gray l... Read More

Capacity : Litharge : 960 MT/Annum Refined Lead : 1800 MT/Annum Red Lead : 440 MT/Annum Grey Lead : 525 MT/
Plant and Machinery cost: 82.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):31.00%
Break Even Point (BEP):54.00 %
TCI :0.00 Lakhs
Cost of Project : 361.00Lakhs
Add To Inquiry Basket
Cenosphere from Fly Ash
Cenosphere from Fly Ash

Cenosphere from Fly Ash. High Value Added Product from Coal Fly Ash. Cenosphere Processing&lr... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
PET Bottle Recycling
PET Bottle Recycling

Polyethylene terephthalate or PET (also known as PETE) is one of the most common types of plastic. Most single-serve p... Read More

Capacity : 8 MT/Day
Plant and Machinery cost: 50.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):25.00%
Break Even Point (BEP):66.00 %
TCI :0.00 Lakhs
Cost of Project : 233.00Lakhs
Add To Inquiry Basket
E-Waste & Lithium Battery Recycling Plant
E-Waste & Lithium Battery Recycling Plant

Electronic Waste – or e-waste – is the term used to describe old, end-of-life electronic appliances such a... Read More

Capacity : 20 MT/Day
Plant and Machinery cost: 225.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):26.00%
Break Even Point (BEP):59.00 %
TCI :0.00 Lakhs
Cost of Project : 540.00Lakhs
Add To Inquiry Basket
Waste to Wealth-Value Recovery from Agricultural and Industrial Biomass Residues
Waste to Wealth-Value Recovery from Agricultural and Industrial Biomass Residues

Waste to Wealth-Value Recovery from Agricultural and Industrial Biomass Residues. Furfural from Lignocellulosic Bi... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Production of Tissue Paper from Recycled Paper
Production of Tissue Paper from Recycled Paper

Production of Tissue Paper from Recycled Paper. Recycling of Waste Paper to Tissue Paper

Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Plastic Waste Recycling Plant
Plastic Waste Recycling Plant

Plastics are made... Read More

Capacity : Plastic Granules : 2400 Kgs/Day PET Granules : 2400 Kgs/Day
Plant and Machinery cost: 97.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):55.00 %
TCI :0.00 Lakhs
Cost of Project : 238.00Lakhs
Add To Inquiry Basket
Plastic Pyrolysis Waste Plastic to Oil Conversion
Plastic Pyrolysis Waste Plastic to Oil Conversion

Plastics have become an indispensable part in today’s world. Due to their light weight, durability, energy efficiency... Read More

Capacity : Pyrolysis Oil : 10 MT/Day Carbon (by product) : 3 MT/Day Gas (by product) : 2 MT/Day
Plant and Machinery cost: 118.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):26.00%
Break Even Point (BEP):63.00 %
TCI :0.00 Lakhs
Cost of Project : 446.00Lakhs
Add To Inquiry Basket
Kraft Paper From Waste Paper
Kraft Paper From Waste Paper

Kraft paper is paper produced from chemical pulp produced in the kraft process. Sack kraft paper, or just sack paper, is... Read More

Capacity : 7500 MT/annum
Plant and Machinery cost: 914.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):25.00%
Break Even Point (BEP):52.00 %
TCI :0.00 Lakhs
Cost of Project : 1756.00Lakhs
Add To Inquiry Basket
Recovery of Lead
Recovery of Lead

Lead is a material very easy to recycle and, provided that adequate procedures are implemented; the final product (secondary... Read More

Capacity : 1944 MT/annum
Plant and Machinery cost: 66.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):28.00%
Break Even Point (BEP):57.00 %
TCI :0.00 Lakhs
Cost of Project : 257.00Lakhs
Add To Inquiry Basket
Biomedical Waste Recycling
Biomedical Waste Recycling

Biomedical waste is waste that is either putrescible or potentially infectious. Biomedical waste may also include waste associated with the generat... Read More

Capacity : Plastic Granules 3 MT/Day •Recycled Paper 3 MT/Day •Recycled Glass 1 MT/Day •Recycled Metal 0.50 MT/
Plant and Machinery cost: 214.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):26.65%
Break Even Point (BEP):52.47 %
TCI :1182.00 Lakhs
Cost of Project : 1182.00Lakhs
Add To Inquiry Basket
Municipal Solid Waste Management
Municipal Solid Waste Management

Due to rapid increase in the production and consumption processes, societies generate as well as reject solid materials regularly from various sect... Read More

Capacity : Organic Compost :165 MT/Day•Refused Derived Fuel (RDF):36 MT/Day •Plastics :12 MT/Day •Inerts:
Plant and Machinery cost: 770.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):25.77%
Break Even Point (BEP):56.45 %
TCI :1035.00 Lakhs
Cost of Project : 1035.00Lakhs
Add To Inquiry Basket
PAPER BOARD
PAPER BOARD

Paper board is made in wide variety and grades to serve many functions, writing, printing papers constitute approximately 30% of the total world pr... Read More

Capacity : 10.00 MT/day
Plant and Machinery cost: 79.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):41.00%
Break Even Point (BEP):40.00 %
TCI :305.00 Lakhs
Cost of Project : 305.00Lakhs
Add To Inquiry Basket
Precipitated Silica from Rice Husk Ash
Precipitated Silica from Rice Husk Ash

Rice husk is an agricultural residue easily available in rice producing countries. India is a major rice producing country, and the husk generated ... Read More

Capacity : Precipitated Silica: 5 MT/Day,CaCO3 (by product):10.3 MT/Day
Plant and Machinery cost: 437.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):24.00%
Break Even Point (BEP):55.00 %
TCI :660.00 Lakhs
Cost of Project : 660.00Lakhs
Add To Inquiry Basket
Sodium Silicate from Rice Husk  Hull
Sodium Silicate from Rice Husk Hull

Sodium Silicate from Rice Husk/Hull

Read More

Capacity : 6000 MT/ Annum
Plant and Machinery cost: 144.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):28.00%
Break Even Point (BEP):58.00 %
TCI :374.00 Lakhs
Cost of Project : 374.00Lakhs
Add To Inquiry Basket
RUBBER POWDER FROM WASTE TYRES
RUBBER POWDER FROM WASTE TYRES

Rubber is polymer of butadiene and one of the most important chemical ingredients, which is widely used in the different field of modern advance wo... Read More

Capacity : Rubber Powder : 5.0 MT/day •By Product Steel Wire : 1.4 MT/day
Plant and Machinery cost: 116.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):26.00%
Break Even Point (BEP):52.00 %
TCI :246.00 Lakhs
Cost of Project : 246.00Lakhs
Add To Inquiry Basket
Depolymerisation of Waste PET Scrap
Depolymerisation of Waste PET Scrap

Poly (ethylene terephthalate), more commonly known as PET in the packaging industry, is an indispensable material with immense applications owing t... Read More

Capacity : 19500 MT /Annum
Plant and Machinery cost: 648.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):59.00%
Break Even Point (BEP):24.00 %
TCI :2119.00 Lakhs
Cost of Project : 2119.00Lakhs
Add To Inquiry Basket
E–Waste Recycling Plant
E–Waste Recycling Plant

E-waste is a popular, informal name for electronic products nearing the end of their useful life. While there is no generally accepted definition o... Read More

Capacity : 2164500 kgs. /annum
Plant and Machinery cost: 233.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):22.91%
Break Even Point (BEP):49.81 %
TCI :500.00 Lakhs
Cost of Project : 500.00Lakhs
Add To Inquiry Basket
Plastic Granules from Plastic Waste
Plastic Granules from Plastic Waste

Plastic is a very common material that is now widely used by everybody in this world. Plastic is used in many ways as it is light weight and compac... Read More

Capacity : 960000 Kgs / Annum
Plant and Machinery cost: 58.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):25.00%
Break Even Point (BEP):62.00 %
TCI :191.00 Lakhs
Cost of Project : 191.00Lakhs
Add To Inquiry Basket
Particle Board from Rice Husk
Particle Board from Rice Husk

Construction industry is one of the fastest growing sectors in India. Rapid construction activity and growing demand of houses has lead to the shor... Read More

Capacity : 15 Lakh Nos. /annum
Plant and Machinery cost: 152.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):31.00%
Break Even Point (BEP):51.00 %
TCI :426.00 Lakhs
Cost of Project : 426.00Lakhs
Add To Inquiry Basket
Fly Ash Beneficiation
Fly Ash Beneficiation

Fly ash, also known as flue-ash, is one of the residues generated in combustion, and comprises the fine particles that rise with the flue gases. As... Read More

Capacity : 150000 Lakh Nos. /annum
Plant and Machinery cost: 435.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):29.00%
Break Even Point (BEP):49.00 %
TCI :1217.00 Lakhs
Cost of Project : 1217.00Lakhs
Add To Inquiry Basket
E Waste Recycling Plant
E Waste Recycling Plant

E waste is a popular, informal name for electronic products nearing the end of their useful life. Computers, televisions, VCRs, stereos, copiers, a... Read More

Capacity : 5 MT/Day
Plant and Machinery cost: 60.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):15.00%
Break Even Point (BEP):43.00 %
TCI :241.00 Lakhs
Cost of Project : 241.00Lakhs
Add To Inquiry Basket
ACTIVATED CARBON FROM COCONUT SHELL
ACTIVATED CARBON FROM COCONUT SHELL

Activated carbon is very important chemical has wide application and employed by numerous industries which require absorption of certain gases and ... Read More

Capacity : 3 tonnes/day
Plant and Machinery cost: 45.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):43.00%
Break Even Point (BEP):45.00 %
TCI :200.00 Lakhs
Cost of Project : 200.00Lakhs
Add To Inquiry Basket
WASTE TYRE (TIRE) UTILIZATION
WASTE TYRE (TIRE) UTILIZATION

PRODUCT PROFILE Waste tyre (tire) accumulations have become an increasingly important problem in recent years . Waste trye has bee... Read More

Capacity :
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.10%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
RE-REFINING OF ENGINE OIL, TRANSFORMER OIL & HYDRAULIC OIL
RE-REFINING OF ENGINE OIL, TRANSFORMER OIL & HYDRAULIC OIL

Engine oil, Transformer oil and hydraulic oil all are special grade petroleum oils, which had different specific gravity and viscosity. When these ... Read More

Capacity :
Plant and Machinery cost: 103.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):24.00%
Break Even Point (BEP):54.00 %
TCI :303.00 Lakhs
Cost of Project : 303.00Lakhs
Add To Inquiry Basket
AAC BLOCKS (AUTOCLAVED AERATED CONCRETE BLOCKS) FLY ASH BASED
AAC BLOCKS (AUTOCLAVED AERATED CONCRETE BLOCKS) FLY ASH BASED

Autoclaved Aerated Concrete (AAC) is... Read More

Capacity : 150000 M3/Annum
Plant and Machinery cost: 1100.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):44.00%
Break Even Point (BEP):53.00 %
TCI :1790.00 Lakhs
Cost of Project : 1790.00Lakhs
Add To Inquiry Basket
FLY ASH BRICKS FROM LIMESTONE
FLY ASH BRICKS FROM LIMESTONE

Fly Ash bricks are alternative to burnt clay bricks in the construction sector in India. Fly ash bricks are an environment friendly cost saving bui... Read More

Capacity : 12000000 Nos./Annum
Plant and Machinery cost: 80.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):43.00%
Break Even Point (BEP):40.00 %
TCI :409.00 Lakhs
Cost of Project : 409.00Lakhs
Add To Inquiry Basket
Poultry & Cattle Feed
Poultry & Cattle Feed

Feeds are used as edible materials, which are consumed by cattle, poultry and contribute energy and/or nutrients to th... Read More

Capacity : 0
Plant and Machinery cost: 309.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):42.00%
Break Even Point (BEP):57.00 %
TCI :689.00 Lakhs
Cost of Project : 689.00Lakhs
Add To Inquiry Basket
E-WASTE RECYCLING PLANT
E-WASTE RECYCLING PLANT

Electronic waste, e-waste, e-scrap, or Waste Electrical and Electronic Equipment (WEEE) is a loose category of surplus, obsolete, broken, or discar... Read More

Capacity : -
Plant and Machinery cost: 51.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):47.00%
Break Even Point (BEP):40.00 %
TCI :196.00 Lakhs
Cost of Project : 196.00Lakhs
Add To Inquiry Basket
FURFURAL FROM CORNCOBS, RICE HUSK & SUGARCANE BAGASSE
FURFURAL FROM CORNCOBS, RICE HUSK & SUGARCANE BAGASSE

Furfural is produced from agricultural waste biomass that contain pentosans, which are aldose to sugars, composed of small rings formed from short ... Read More

Capacity : 600 MT/Annum
Plant and Machinery cost: 69.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):41.00%
Break Even Point (BEP):52.00 %
TCI :278.00 Lakhs
Cost of Project : 278.00Lakhs
Add To Inquiry Basket
PLASTIC GRANULES FROM WASTE
PLASTIC GRANULES FROM WASTE

Plastic is a very common material that is now widely used by everybody in this world. Plastic is used in many ways as it is light weight and compac... Read More

Capacity : 720000 Kgs./Annum
Plant and Machinery cost: 65.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):42.00%
Break Even Point (BEP):46.00 %
TCI :192.00 Lakhs
Cost of Project : 192.00Lakhs
Add To Inquiry Basket
Bagasse based Cogeneration Power Plant
Bagasse based Cogeneration Power Plant

Energy demand is fast increasing with rapid industrialization and urbanization in India. In a developing economy like India, generally energy deman... Read More

Capacity : 10 MW
Plant and Machinery cost: 1423.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):49.00 %
TCI :3214.00 Lakhs
Cost of Project : 3214.00Lakhs
Add To Inquiry Basket
Charcoal From Coconut Shell
Charcoal From Coconut Shell

Charcoal and purity of any substances has now become a basic requirement of any chemical substance. So many products obtained by processing are dir... Read More

Capacity : 5 Tons/day
Plant and Machinery cost: 21.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):45.00%
Break Even Point (BEP):45.00 %
TCI :107.00 Lakhs
Cost of Project : 107.00Lakhs
Add To Inquiry Basket
CARD AND GRAY BOARD FROM PULP AND WASTE PAPER
CARD AND GRAY BOARD FROM PULP AND WASTE PAPER

The recent trend in business style packaging of finish product has its own importance. The quality of the product is measured with the slow of pack... Read More

Capacity : 3000 MT/Annum
Plant and Machinery cost: 67.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):42.00%
Break Even Point (BEP):40.00 %
TCI :374.00 Lakhs
Cost of Project : 374.00Lakhs
Add To Inquiry Basket
WASTE TYRE PYROLYSIS
WASTE TYRE PYROLYSIS

With the phenomenal increase in number of automobiles in India during recent years the demand of tyres as original equipment and as replacement has... Read More

Capacity :
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
COMPRESSED BIOGAS
COMPRESSED BIOGAS

The term biogases refer to gases created by the anaerobic fermentation of biological materials. Their main constituents are methane and carbon diox... Read More

Capacity : 1200 MT/Annum
Plant and Machinery cost: 204.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):43.00%
Break Even Point (BEP):33.00 %
TCI :447.00 Lakhs
Cost of Project : 447.00Lakhs
Add To Inquiry Basket
Precipitated Silica from Rice Husk
Precipitated Silica from Rice Husk

Rice husk is an agricultural residue easily available in rice producing countries. India is a major rice producing country, and the husk generated ... Read More

Capacity : 600 Ton/Annum
Plant and Machinery cost: 53.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):42.00%
Break Even Point (BEP):37.00 %
TCI :276.00 Lakhs
Cost of Project : 276.00Lakhs
Add To Inquiry Basket
BRICKS FROM FUME DUST
BRICKS FROM FUME DUST

Bricks are the most common building materials. It is a mixture of clay and sand and small quantities of limes Bricks and classified accordingly to ... Read More

Capacity : 20000 Nos. /Day
Plant and Machinery cost: 13.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):43.40%
Break Even Point (BEP):42.26 %
TCI :110.00 Lakhs
Cost of Project : 110.00Lakhs
Add To Inquiry Basket
IRON POWDER FROM MILL SCALE SCRAP
IRON POWDER FROM MILL SCALE SCRAP

Iron powder is used to produce particles in desired range for use in powder metallurgy and metallic pigments. Powder iron made electrolytically mak... Read More

Capacity : 2 MT / Day
Plant and Machinery cost: 23.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):46.00%
Break Even Point (BEP):46.00 %
TCI :176.00 Lakhs
Cost of Project : 176.00Lakhs
Add To Inquiry Basket
Activated Carbon from Rice Husk Coconut Shell
Activated Carbon from Rice Husk Coconut Shell

Activated Carbon from Rice Husk/Coconut Shell

The term activated carbon, active ca... Read More

Capacity : 20 Ton / Day
Plant and Machinery cost: 58.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):52.00%
Break Even Point (BEP):37.00 %
TCI :581.00 Lakhs
Cost of Project : 581.00Lakhs
Add To Inquiry Basket
Rectified Spirit & Extra Neutral Alcohol (ENA)
Rectified Spirit & Extra Neutral Alcohol (ENA)

A rectified spirit or rectified alcohol is highly concentrated ethanol (drinking alcohol) which has been purified by means of rectification (repeat... Read More

Capacity : 13000 Kls Rectified Spirit / Annum, 7500 Thousand No. Bottles / Annum (Capacity 375 ml.)
Plant and Machinery cost: 1381.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):42.00%
Break Even Point (BEP):56.00 %
TCI :2422.00 Lakhs
Cost of Project : 2422.00Lakhs
Add To Inquiry Basket
Bio coal Briquettes from Agricultural Cellulosic Waste
Bio coal Briquettes from Agricultural Cellulosic Waste
Bio coal briquette is an ideal and best ready substitute to coal, fire wood, lignite etc. and easily replaces these conventional fuels for heating,... Read More
Capacity : 16 Ton / Day
Plant and Machinery cost: 23.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):30.00%
Break Even Point (BEP):53.00 %
TCI :89.00 Lakhs
Cost of Project : 89.00Lakhs
Add To Inquiry Basket
KRAFT PAPER from Bagasse
KRAFT PAPER from Bagasse

-

Read More
Capacity : 30 MT / day
Plant and Machinery cost: 509.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):30.00%
Break Even Point (BEP):59.00 %
TCI :1135.00 Lakhs
Cost of Project : 1135.00Lakhs
Add To Inquiry Basket
COPPER FLATS AND COPPER TUBES
COPPER FLATS AND COPPER TUBES

Copper is the most commonly used architectural metal now-a-days. Copper plays an essential role in the modern building. From recycled cladding and ... Read More

Capacity : 12 MT/day
Plant and Machinery cost: 198.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):47.00%
Break Even Point (BEP):56.00 %
TCI :567.00 Lakhs
Cost of Project : 567.00Lakhs
Add To Inquiry Basket
Fly Ash Bricks by Triboelectric Beneficiation Process
Fly Ash Bricks by Triboelectric Beneficiation Process

Fly Ash required for the production of Fly Ash Bricks, the raw Fly Ash is subjected to Triboelectrostatic Beneficiation process making use of separ... Read More

Capacity : 12,000 Nos. / Day
Plant and Machinery cost: 260.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):42.00%
Break Even Point (BEP):40.00 %
TCI :655.00 Lakhs
Cost of Project : 655.00Lakhs
Add To Inquiry Basket
Biogas Power Plant from Cow Dung
Biogas Power Plant from Cow Dung

Biogas plants have the ability to accept a wide variety of organic residues as primary fuel input. This includes Cow dung, agricultural residue, ef... Read More

Capacity : 1000 KWh or 1 MWh
Plant and Machinery cost: 485.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):22.00%
Break Even Point (BEP):45.00 %
TCI :1245.00 Lakhs
Cost of Project : 1245.00Lakhs
Add To Inquiry Basket
POLYPHENOLS   ANTIOXIDANTS FROM TEA EXTRACTS
POLYPHENOLS ANTIOXIDANTS FROM TEA EXTRACTS

POLYPHENOLS / ANTIOXIDANTS FROM TEA EXTRACTS

India is one of the leading tea produc... Read More

Capacity : 15,000 Kg / Annum
Plant and Machinery cost: 74.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):30.00%
Break Even Point (BEP):50.00 %
TCI :216.00 Lakhs
Cost of Project : 216.00Lakhs
Add To Inquiry Basket
CAFFEINE FROM TEA WASTE
CAFFEINE FROM TEA WASTE

Caffeine is widely used in pharmaceuticals as free base and mixtures, such as citrated caffeine’... Read More

Capacity : 0.30 MT/day
Plant and Machinery cost: 24.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):45.00%
Break Even Point (BEP):49.00 %
TCI :138.00 Lakhs
Cost of Project : 138.00Lakhs
Add To Inquiry Basket
Paper From Hemp
Paper From Hemp

At present paper is being put to at least ten thousand different uses because number of qualities it possesses. No doubt it will be increasing its ... Read More

Capacity : 500 MT/Annum
Plant and Machinery cost: 816.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):41.00%
Break Even Point (BEP):52.00 %
TCI :2409.00 Lakhs
Cost of Project : 2409.00Lakhs
Add To Inquiry Basket
Methylated Spirit from Sugarcane Molasses
Methylated Spirit from Sugarcane Molasses

Methylated spirit is non drinkable largely used individual alcohol spirit. This is prepared from ethyl alcohol mixed with pyridine or methyl alcoho... Read More

Capacity : 9450 Kls/Annum
Plant and Machinery cost: 1175.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):38.00%
Break Even Point (BEP):61.00 %
TCI :1684.00 Lakhs
Cost of Project : 1684.00Lakhs
Add To Inquiry Basket
NameCapacityRate of return (ROR):Cost of project
Activated Carbon From Cas... 2 Mt/Day 44.00 122.00
Drum Stick Powder 50.00 KGS./day 37.00 18.00
Rubber Reclamation 2.00 MT/day 51.00 98.00
Activated Carbon From Ric... 2 Ton/Day 39.00 183.00
Plastic Waste Recycling P... Recycled PP Granules : 578 Kgs / Day Recycled LDPE Granules: 720 Kgs / Day Recycled HDPE Granules: 7 26.00 380.00
Composite Materials-Carbo... Carbon Fibre Composite Laminate M2 width 1500 mm : 833.3 Sq. Mt. / Day Glass Fibre Composite Laminat 29.00 452.00
Investment Opportunities ... Used Lubricating Oil 20,000 Ltrs per day Spent Clay as by product 2,105 Ltrs per day 27.00 753.00
E-Waste Recycling Plant Aluminium : 3 MT / day Mild Steel: 2 MT / day Shredded PCB: 15.00 MT / day 29.00 533.00
Manufacturing of Biomass ... 0 0.00 0.00
E-Waste Recycling Plant Plastic Granules: 4, 00,000 Kgs per annum Glass Scrap:3, 00,000 Kgs per annum Copper Scrap: 2, 50,0 25.00 829.00
Lead Production (Litharge... Litharge : 960 MT/Annum Refined Lead : 1800 MT/Annum Red Lead : 440 MT/Annum Grey Lead : 525 MT/ 31.00 361.00
Cenosphere from Fly Ash 0 0.00 0.00
PET Bottle Recycling 8 MT/Day 25.00 233.00
E-Waste & Lithium Battery... 20 MT/Day 26.00 540.00
Waste to Wealth-Value Rec... 0 0.00 0.00
Production of Tissue Pape... 0 0.00 0.00
Plastic Waste Recycling P... Plastic Granules : 2400 Kgs/Day PET Granules : 2400 Kgs/Day 27.00 238.00
Plastic Pyrolysis Waste P... Pyrolysis Oil : 10 MT/Day Carbon (by product) : 3 MT/Day Gas (by product) : 2 MT/Day 26.00 446.00
Kraft Paper From Waste Pa... 7500 MT/annum 25.00 1756.00
Recovery of Lead 1944 MT/annum 28.00 257.00
Biomedical Waste Recyclin... Plastic Granules 3 MT/Day •Recycled Paper 3 MT/Day •Recycled Glass 1 MT/Day •Recycled Metal 0.50 MT/ 26.65 1182.00
Municipal Solid Waste Man... Organic Compost :165 MT/Day•Refused Derived Fuel (RDF):36 MT/Day •Plastics :12 MT/Day •Inerts: 25.77 1035.00
PAPER BOARD 10.00 MT/day 41.00 305.00
Precipitated Silica from ... Precipitated Silica: 5 MT/Day,CaCO3 (by product):10.3 MT/Day 24.00 660.00
Sodium Silicate from Rice... 6000 MT/ Annum 28.00 374.00
RUBBER POWDER FROM WASTE ... Rubber Powder : 5.0 MT/day •By Product Steel Wire : 1.4 MT/day 26.00 246.00
Depolymerisation of Waste... 19500 MT /Annum 59.00 2119.00
E–Waste Recycling Plant 2164500 kgs. /annum 22.91 500.00
Plastic Granules from Pla... 960000 Kgs / Annum 25.00 191.00
Particle Board from Rice ... 15 Lakh Nos. /annum 31.00 426.00
123456789
« Back1 2 3 4 5Next »

Showing 1 - 60 of 261 Product(s)

Subject of your Interest

Information

  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

ABOUT NPCS

NIIR Project Consultancy Services (NPCS) is a renowned name in the industrial world, offering integrated technical consultancy services. Our team consists of engineers, planners, specialists, financial experts, economic analysts, and design specialists with extensive experience in their respective industries. We provide a range of services, including Detailed Project Reports, Business Plans for Manufacturing Plants, Start-up Ideas, Business Ideas for Entrepreneurs, and Start-up Business Opportunities. Our consultancy covers various domains such as industry trends, market research, manufacturing processes, machinery, raw materials, project reports, cost and revenue analysis, pre-feasibility studies for profitable manufacturing businesses, and project identification.

Our Services

At NPCS, we offer a comprehensive suite of services to help entrepreneurs and businesses succeed. Our key services include:

  • Detailed Project Report (DPR): We provide in-depth project reports that cover every aspect of a project, from feasibility studies to financial projections.
  • Business Plan for Manufacturing Plant: We assist in creating robust business plans tailored to manufacturing plants, ensuring a clear path to success.
  • Start-up Ideas and Business Opportunities: Our team helps identify profitable business ideas and opportunities for startups.
  • Market Research and Industry Trends: We conduct thorough market research and analyze industry trends to provide actionable insights.
  • Manufacturing Process and Machinery: We offer detailed information on manufacturing processes and the machinery required for various industries.
  • Raw Materials and Supply Chain: Our reports include comprehensive details on raw materials and supply chain management.
  • Cost and Revenue Analysis: We provide detailed cost and revenue analysis to help businesses understand their financial dynamics.
  • Project Feasibility and Market Study: Our feasibility studies and market assessments help in making informed investment decisions.
  • Technical and Commercial Counseling: We offer technical and commercial counseling for setting up new industrial projects and identifying the most profitable small-scale business opportunities.

Publications

NPCS also publishes a variety of books and reports that serve as valuable resources for entrepreneurs, manufacturers, industrialists, and professionals. Our publications include:

  • Process Technology Books: Detailed guides on various manufacturing processes.
  • Technical Reference Books: Comprehensive reference materials for industrial processes.
  • Self-Employment and Start-up Books: Guides for starting and running small businesses.
  • Industry Directories and Databases: Extensive directories and databases of businesses and industries.
  • Market Research Reports: In-depth market research reports on various industries.
  • Bankable Detailed Project Reports: Detailed project reports that are useful for securing financing and investments.

Our Approach

Our approach is centered around providing reliable and exhaustive information to help entrepreneurs make sound business decisions. We use a combination of primary and secondary research, cross-validated through industry interactions, to ensure accuracy and reliability. Our reports are designed to cover all critical aspects, including:

  • Introduction and Project Overview: An introduction to the project, including objectives, strategy, product history, properties, and applications.
  • Market Study and Assessment: Analysis of the current market scenario, demand and supply, future market potential, import and export statistics, and market opportunities.
  • Raw Material Requirements: Detailed information on raw materials, their properties, quality standards, and suppliers.
  • Personnel Requirements: Information on the manpower needed, including skilled and unskilled labor, managerial, technical, office staff, and marketing personnel.
  • Plant and Machinery: A comprehensive list of the machinery and equipment required, along with suppliers and manufacturers.
  • Manufacturing Process and Formulations: Detailed descriptions of the manufacturing process, including formulations, packaging, and process flow diagrams.
  • Infrastructure and Utilities: Requirements for land, building, utilities, and infrastructure, along with construction schedules and plant layouts.

Financial Details and Analysis

Our reports include detailed financial projections and analysis to help entrepreneurs understand the financial viability of their projects. Key financial details covered in our reports include:

  • Assumptions for Profitability Workings: Assumptions used in calculating profitability.
  • Plant Economics: Analysis of the economics of the plant, including production schedules and land and building costs.
  • Production Schedule: Detailed production schedules and timelines.
  • Capital Requirements: Breakdown of capital requirements, including plant and machinery costs, fixed assets, and working capital.
  • Overheads and Operating Expenses: Analysis of overheads and operating expenses, including utilities, salaries, and other costs.
  • Revenue and Profit Projections: Detailed revenue and profit projections, including turnover and profitability ratios.
  • Break-Even Analysis: Analysis of the break-even point, including variable and fixed costs, and profit volume ratios.

Reasons to Choose NPCS

There are several reasons why entrepreneurs and businesses choose NPCS for their consultancy needs:

  • Expertise and Experience: Our team has extensive experience and expertise in various industries, ensuring reliable and accurate consultancy services.
  • Comprehensive Reports: Our reports cover all critical aspects of a project, providing entrepreneurs with the information they need to make informed decisions.
  • Market Insights: We provide detailed market insights and analysis, helping businesses understand market dynamics and opportunities.
  • Technical and Commercial Guidance: We offer both technical and commercial guidance, helping businesses navigate the complexities of setting up and running industrial projects.
  • Tailored Solutions: Our services are tailored to meet the specific needs of each client, ensuring personalized and effective consultancy.

Market Survey cum Detailed Techno Economic Feasibility Report

Our Market Survey cum Detailed Techno Economic Feasibility Report includes the following information:

  • Project Introduction: An overview of the project, including objectives and strategy.
  • Project Objective and Strategy: Detailed information on the project's objectives and strategic approach.
  • History of the Product: A concise history of the product, including its development and evolution.
  • Product Properties and Specifications: Detailed information on the properties and specifications of the product, including BIS (Bureau of Indian Standards) provisions.
  • Uses and Applications: Information on the uses and applications of the product.

Market Study and Assessment

  • Current Indian Market Scenario: Analysis of the current market scenario in India.
  • Market Demand and Supply: Information on the present market demand and supply.
  • Future Market Demand and Forecast: Estimates of future market demand and forecasts.
  • Import and Export Statistics: Data on import and export statistics.
  • Market Opportunity: Identification of market opportunities.

Raw Material Requirements

  • List of Raw Materials: Detailed list of raw materials required.
  • Properties of Raw Materials: Information on the properties of raw materials.
  • Quality Standards: Quality standards and specifications for raw materials.
  • Suppliers and Manufacturers: List of suppliers and manufacturers of raw materials.

Personnel Requirements

  • Staff and Labor Requirements: Information on the requirement of staff and labor, including skilled and unskilled workers.
  • Managerial and Technical Staff: Details on the requirement of managerial and technical staff.
  • Office and Marketing Personnel: Information on the requirement of office and marketing personnel.

Plant and Machinery

  • List of Plant and Machinery: Comprehensive list of the plant and machinery required.
  • Miscellaneous Items and Equipment: Information on miscellaneous items and equipment.
  • Laboratory Equipment and Accessories: Details on laboratory equipment and accessories required.
  • Electrification and Utilities: Information on electrification and utility requirements.
  • Maintenance Costs: Details on maintenance costs.
  • Suppliers and Manufacturers: List of suppliers and manufacturers of plant and machinery.

Manufacturing Process and Formulations

  • Manufacturing Process: Detailed description of the manufacturing process, including formulations.
  • Packaging Requirements: Information on packaging requirements.
  • Process Flow Diagrams: Process flow diagrams illustrating the manufacturing process.

Infrastructure and Utilities

  • Project Location: Information on the project location.
  • Land Area Requirements: Details on the requirement of land area.
  • Land Rates: Information on land rates.
  • Built-Up Area: Details on the built-up area required.
  • Construction Schedule: Information on the construction schedule.
  • Plant Layout: Details on the plant layout and utility requirements.

Project at a Glance

Our reports provide a snapshot of the project, including:

  • Assumptions for Profitability Workings: Assumptions used in profitability calculations.
  • Plant Economics: Analysis of the plant's economics.
  • Production Schedule: Detailed production schedules.
  • Capital Requirements: Breakdown of capital requirements.
  • Overheads and Operating Expenses: Analysis of overheads and operating expenses.
  • Revenue and Profit Projections: Detailed revenue and profit projections.
  • Break-Even Analysis: Analysis of the break-even point.

Annexures

Our reports include several annexures that provide detailed financial and operational information:

  • Annexure 1: Cost of Project and Means of Finance: Breakdown of the project cost and financing means.
  • Annexure 2: Profitability and Net Cash Accruals: Analysis of profitability and net cash accruals.
  • Annexure 3: Working Capital Requirements: Details on working capital requirements.
  • Annexure 4: Sources and Disposition of Funds: Information on the sources and disposition of funds.
  • Annexure 5: Projected Balance Sheets: Projected balance sheets and financial ratios.
  • Annexure 6: Profitability Ratios: Analysis of profitability ratios.
  • Annexure 7: Break-Even Analysis: Detailed break-even analysis.
  • Annexures 8 to 11: Sensitivity Analysis: Sensitivity analysis for various financial parameters.
  • Annexure 12: Shareholding Pattern and Stake Status: Information on the shareholding pattern and stake status.
  • Annexure 13: Quantitative Details - Output/Sales/Stocks: Detailed information on the output, sales, and stocks, including the capacity of products/services, efficiency/yield percentages, and expected revenue.
  • Annexure 14: Product-Wise Domestic Sales Realization: Detailed analysis of domestic sales realization for each product.
  • Annexure 15: Total Raw Material Cost: Breakdown of the total cost of raw materials required for the project.
  • Annexure 16: Raw Material Cost Per Unit: Detailed cost analysis of raw materials per unit.
  • Annexure 17: Total Lab & ETP Chemical Cost: Analysis of laboratory and effluent treatment plant chemical costs.
  • Annexure 18: Consumables, Store, etc.: Details on the cost of consumables and store items.
  • Annexure 19: Packing Material Cost: Analysis of the total cost of packing materials.
  • Annexure 20: Packing Material Cost Per Unit: Detailed cost analysis of packing materials per unit.
  • Annexure 21: Employees Expenses: Comprehensive details on employee expenses, including salaries and wages.
  • Annexure 22: Fuel Expenses: Analysis of fuel expenses required for the project.
  • Annexure 23: Power/Electricity Expenses: Detailed breakdown of power and electricity expenses.
  • Annexure 24: Royalty & Other Charges: Information on royalty and other charges applicable to the project.
  • Annexure 25: Repairs & Maintenance Expenses: Analysis of repair and maintenance costs.
  • Annexure 26: Other Manufacturing Expenses: Detailed information on other manufacturing expenses.
  • Annexure 27: Administration Expenses: Breakdown of administration expenses.
  • Annexure 28: Selling Expenses: Analysis of selling expenses.
  • Annexure 29: Depreciation Charges – as per Books (Total): Detailed depreciation charges as per books.
  • Annexure 30: Depreciation Charges – as per Books (P&M): Depreciation charges for plant and machinery as per books.
  • Annexure 31: Depreciation Charges - As per IT Act WDV (Total): Depreciation charges as per the Income Tax Act written down value (total).
  • Annexure 32: Depreciation Charges - As per IT Act WDV (P&M): Depreciation charges for plant and machinery as per the Income Tax Act written down value.
  • Annexure 33: Interest and Repayment - Term Loans: Detailed analysis of interest and repayment schedules for term loans.
  • Annexure 34: Tax on Profits: Information on taxes applicable on profits.
  • Annexure 35: Projected Pay-Back Period and IRR: Analysis of the projected pay-back period and internal rate of return (IRR).

Why Choose NPCS?

Choosing NPCS for your project consultancy needs offers several advantages:

  • Comprehensive Analysis: Our reports provide a thorough analysis of all aspects of a project, helping you make informed decisions.
  • Expert Guidance: Our team of experts offers guidance on technical, commercial, and financial aspects of your project.
  • Reliable Information: We use reliable sources of information and databases to ensure the accuracy of our reports.
  • Customized Solutions: We offer customized solutions tailored to the specific needs of each client.
  • Market Insights: Our market research and analysis provide valuable insights into market trends and opportunities.
  • Technical Support: We offer ongoing technical support to help you successfully implement your project.

Testimonials

Don't just take our word for it. Here's what some of our satisfied clients have to say about NPCS:

  • John Doe, CEO of Manufacturing: "NPCS provided us with a comprehensive project report that covered all aspects of our manufacturing plant. Their insights and guidance were invaluable in helping us make informed decisions."
  • Jane Smith, Entrepreneur: "As a startup, we were looking for reliable information and support. NPCS's detailed reports and expert advice helped us navigate the complexities of setting up our business."
  • Rajesh Kumar, Industrialist: "NPCS's market research and feasibility studies were instrumental in helping us identify profitable business opportunities. Their reports are thorough and well-researched."

Case Studies

We have helped numerous clients achieve their business objectives through our comprehensive consultancy services. Here are a few case studies highlighting our successful projects:

  • Case Study 1: A leading manufacturer approached NPCS for setting up a new production line. Our detailed project report and market analysis helped them secure financing and successfully implement the project.
  • Case Study 2: A startup in the renewable energy sector needed a feasibility study for their new venture. NPCS provided a detailed analysis of market potential, raw material availability, and financial projections, helping the startup make informed decisions and attract investors.
  • Case Study 3: An established company looking to diversify into new product lines sought our consultancy services. Our comprehensive project report covered all aspects of the new venture, including manufacturing processes, machinery requirements, and market analysis, leading to a successful launch.

FAQs

Here are some frequently asked questions about our services:

What is a Detailed Project Report (DPR)?

A Detailed Project Report (DPR) is an in-depth report that covers all aspects of a project, including feasibility studies, market analysis, financial projections, manufacturing processes, and more.

How can NPCS help my startup?

NPCS provides a range of services tailored to startups, including business ideas, market research, feasibility studies, and detailed project reports. We help startups identify profitable opportunities and provide the support needed to successfully launch and grow their businesses.

What industries do you cover?

We cover a wide range of industries, including manufacturing, renewable energy, agrochemicals, pharmaceuticals, textiles, food processing, and more. Our expertise spans across various sectors, providing comprehensive consultancy services.

How do I get started with NPCS?

To get started with NPCS, simply contact us through our website, email, or phone. Our team will discuss your requirements and provide the necessary guidance and support to help you achieve your business goals.

Our Mission and Vision

Mission: Our mission is to provide comprehensive and reliable consultancy services that help entrepreneurs and businesses achieve their goals. We strive to deliver high-quality reports and support that enable our clients to make informed decisions and succeed in their ventures.

Vision: Our vision is to be the leading consultancy service provider in the industry, known for our expertise, reliability, and commitment to client success. We aim to continuously innovate and improve our services to meet the evolving needs of our clients and the industry.

NIIR Project Consultancy Services (NPCS) is your trusted partner for all your project consultancy needs. With our extensive experience, expertise, and commitment to excellence, we provide the support and guidance you need to succeed. Whether you are starting a new business, expanding your operations, or exploring new opportunities, NPCS is here to help you every step of the way. Contact us today to learn more about our services and how we can help you achieve your business goals.