Wire binding is a popular commercial book binding method, and is known by a number of different names including twin loop wire, wire-o, double loop wire, double-o, ring wire and wire bind. With this binding method, users insert their punched pages onto a "C" shaped spine and then use a wire closer to squeeze the spine until it is round. Documents that are bound with wire binding will open completely flat on a desk and allow for 360 degree rotation of bound pages.
· Binding Wire is used for the purpose of tying applications in the field of construction. It is used extensively in the construction sector for tying the rebars at the joints so as to keep the structure intact.
· The application of binding wire requires it to be flexible enough so as to tie easily and strong enough so as to hold the joint in place. There are various methods used for tying the joints.
Binding wires are made from high quality carbon steel making them highly resistant to corrosion and abrasion. In RCC work where we use MS steel bars either plain or ribbed or tor, binding wires are used to bind the steel bars to each other at appropriate place according to design at a spacing defined by the drawing. The steel bars should not be disturbed while lying cements concrete in any of member such as column, beam, slab wall etc.