Tripura is a state in Northeast India. The third-smallest state in the country, it covers 10,491 km2 (4,051 sq mi) and is bordered by Bangladesh (East Bengal) to the north, south, and west, and the Indian states of Assam and Mizoram to the east. Tripura is a landlocked state in North East India. The state has a tropical savanna climate, designated Aw under the Köppen climate classification. The undulating topography leads to local variations, particularly in the hill ranges. The four main seasons are winter, from December to February; pre-monsoon or summer, from March to April; monsoon, from May to September; and post-monsoon, from October to November.

Tripura's gross state domestic product for 2010–11 was 129.47 billion (US$2.1 billion) at constant price (2004–05), recording 5.71 per cent growth over the previous year. In the same period, the GDP of India was 48778.42 billion (US$790 billion), with a growth rate of 8.55 per cent. Tripura is an agrarian state with more than half of the population dependent on agriculture and allied activities. However, due to hilly terrain and forest cover, only 27 per cent of the land is available for cultivation. Rice, the major crop of the state, is cultivated in 91 per cent of the cropped area.

TOURISM

Tripura has a geographical area of about 10,492 sq. km. almost two-thirds of the state is under hilly terrain and it is surrounded on three sides by the deltaic basin of Bangladesh. The Tripura tribal’s are divided into two groups: Puran Tripuras and Natun Tripuras. The Puran Tripuras are the original inhabitants of the State and constitute a little over 16% of the total and 57% of the tribal population of the State. The Department of Tourism, Govt. of India, under the ministry of Tourism and Culture has been providing liberal financial and technical support for the tourism development in the state based on the projects received from the states. It is quite clear that Tripura has tremendous and quite unique tourism potential. This could be tapped mainly through the concept of Eco-tourism and Heritage tourism. Nature / wildlife tourism, adventure tourism, rural tourism, leisure tourism, pilgrimage tourism, international border tourism could be some special tourist packages. The Tourism Development in the Northeast region will depend on integrated approach, involving various government departments, private entrepreneurs, voluntary organizations and local community. This approach will also help in evolving local people’s perception towards tourism development as a strong tool for socio-economic up liftment.

INDUSTRIAL SECTOR

The State Government offers a package of incentives for setting up of industrial units, which is comparable to other states. Besides, the special incentive package i.e. North East Industrial and Investment Promotion Policy (NEIIP) declared by the Government of India for the North East Region is available to industrial units.

State Package of Incentives under Tripura Industrial Investment Promotion Incentive Scheme-

•                    Capital Investment Subsidy @ 30% and additional subsidy @ 2.5% for enterprises of ST, SC, & women individuals on Fixed Capital Investment.

•                    Full Reimbursement of Standard Certification Fees /Charges / other expenses on account of obtaining a standard Certification.

•                    Provides State Transport Subsidy for covering the portion for which Central Transport Subsidy is not available

•                    85% Exemption from the payment of Earnest Money and Security Deposits on tenders floated by State Govt. Department / Agencies.

Incentives declared by Central Government:

•                    Exemption of Excise Duty on finished products.

•                    Central Transport Subsidy.

•                    Income Tax Benefit.

•                    Capital Investment Subsidy.

•                    Comprehensive Insurance Scheme for insurance coverage. Subsidies to service sector, bio-technology and power generating industries.

INVESTMENT OPPORTUNITIES

Tripura offers an investor-friendly environment. The Government welcomes investments into the State, from both domestic and foreign investors.

•        Natural gas

Tripura has vast reserves of natural gas in non-associate form. The gas is of high quality, with high methane content of up to 97%. The availability of superior quality natural gas, at concessional price, offers a great opportunity to prospective investors, to set up gas-based industrial units, using natural gas

•        Information Technology (IT)

Tripura has been considered the second best IT destination in the North East. IT sector (including IT-enabled services) has been identified as one of the major potential growth sectors by the state. The high literacy rate of the State provides additional advantage for development of the sector.

•        Food Processing

The State government has identified food processing as a major thrust area. There is a vast potential for setting up of food processing units in the State. The agro-climatic conditions in Tripura are ideally suited for production of a large variety of horticultural crops.

•        Handicrafts

From time immemorial, Tripura has carved out a name for itself in the field of handicrafts. The gifted artisans produce wonderful objects of crafts from simple material like cane, bamboo and wood.

•        Tourism

Tripura is an attractive tourist destination. The state has a rich cultural heritage. There are number of historical Hindu and Buddhist sites.


INDUSTRIAL POLICY

•        To improve Basic as well Industrial Infrastructure.

•        Industrial Growth by attracting Private Investment.

•        To improve investment climate towards better regulation by removing barriers to competition.

•        Creation of hassle-free and congenial investment climate.

•        To bring significant increase in the State Domestic Product.

•        Widening of resources base of the state.

•        Development of connectivity (Internal road, railways and air & telecom).

•        Better social infrastructure Enabling Entrepreneurship -building capacities through entrepreneurial and technical skills, training and promotion of self-employment.

THRUST AREAS

•        Natural Gas

•        Food Processing

•        Rubber

•        Tea

•        Handicraft

•        Bamboo

•        Handloom

•        Tourism

•        Information Technology

•        Education

  •           Healthcare

The Department of Industries & Commerce was established to promote Village and Small-scale industries as well as medium and large scale industries in the State. While efforts are being made to promote entrepreneurship within the State, the outside investors in the public and private sectors are also encouraged both for their financial capabilities and technical expertise, for the medium and large-scale units. The major existing industrial area is the Industrial Growth Centre Complex at Bodhjungnagar which also includes Food Park, Rubber Park and Export Promotion Industrial Park. The other industrial sites near Agartala as the main business and industrial centres are Dukli, Arundhatinagar and Badharghat. The mineral resources are minor amounts of glass sands, limestone, plastic clay and hard rock and all of these materials are being used in varying degrees. Setting up of ceramic tiles unit and other mineral based industries are being encouraged in the private sector.


We can provide you detailed project reports on the following topics. Please select the projects of your interests.
Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the ost of raw material, formulating the cash flow statement, projecting the balance sheet etc.
We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics. Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.


We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Add multiple items to inquiry

Select the items and then press Add to inquiry button

Sort by :
Start Commercial Pig Farming Business Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics, Working Capital Requirement, Plant Layout, Process Flow Sheet, Cost of Project, Projected Balance Sheets, Profitability Ratios, Break Even Analysis
Start Commercial Pig Farming Business Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics, Working Capital Requirement, Plant Layout, Process Flow Sheet, Cost of Project, Projected Balance Sheets, Profitability Ratios, Break Even Analysis

Commercial pig farming in India for meat production is one of the best and profitable business ideas for the Indian people. There are several highl... Read More

Capacity : 1500 Pig Per Annum
Plant and Machinery cost: 2.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):54.00%
Break Even Point (BEP):44.00 %
TCI :0.00 Lakhs
Cost of Project : 32.00Lakhs
Add To Inquiry Basket
PUFFED RICE (Muri)
PUFFED RICE (Muri)

Puffed Rice is a commonly consumed commodity as a pastime snack. It can be used in combination with nuts such as groundnut ... Read More

Capacity : 1200 MT/annum
Plant and Machinery cost: 6.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):29.00%
Break Even Point (BEP):74.00 %
TCI :0.00 Lakhs
Cost of Project : 28.00Lakhs
Add To Inquiry Basket
Multiblade Safety Razor
Multiblade Safety Razor

A safety razor is a shaving implement with a protective device positioned between the edge of the blade and the skin. The i... Read More

Capacity : Multiblade Safety Razor (2 Blade): 86,400,000 Nos/annum
Plant and Machinery cost: 313.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):30.00%
Break Even Point (BEP):60.00 %
TCI :0.00 Lakhs
Cost of Project : 826.00Lakhs
Add To Inquiry Basket
Spices in Pouch Packing
Spices in Pouch Packing

Spices are non-leafy parts (e.g. bud, fruit, seed, bark, rhizome, and bulb) of plants used as a flavoring or seasoning, alt... Read More

Capacity : 360,000 kgs./annum
Plant and Machinery cost: 26.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):29.00%
Break Even Point (BEP):44.00 %
TCI :0.00 Lakhs
Cost of Project : 181.00Lakhs
Add To Inquiry Basket
Tennis Ball  (Used in Playing Cricket)
Tennis Ball (Used in Playing Cricket)

Tennis ball cricket is a variant of cricket popular in the Indian subcontinent, and a very South Asians living in the US &a... Read More

Capacity : 1,500,000 NOS/annum
Plant and Machinery cost: 39.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):28.00%
Break Even Point (BEP):56.00 %
TCI :0.00 Lakhs
Cost of Project : 164.00Lakhs
Add To Inquiry Basket
NPK Complex Organic Fertilizer Plant
NPK Complex Organic Fertilizer Plant

Feeding a population of 9 billion pe... Read More

Capacity : 3600 MT/annum
Plant and Machinery cost: 177.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):25.00%
Break Even Point (BEP):50.00 %
TCI :498.00 Lakhs
Cost of Project : 498.00Lakhs
Add To Inquiry Basket
Adhesive Based on Epoxy Resin (2 Pack)
Adhesive Based on Epoxy Resin (2 Pack)

The adhesive industry has seen signi... Read More

Capacity : Pure Epoxy Resin with Curing Agent : 9000000 Kgs/Annum
Plant and Machinery cost: 162.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):32.00%
Break Even Point (BEP):60.00 %
TCI :698.00 Lakhs
Cost of Project : 698.00Lakhs
Add To Inquiry Basket
E-Waste Recycling Plant
E-Waste Recycling Plant

Electronic wastes, e-waste, e-scrap, or Waste Electrical and Electronic Equipment (WEEE) is a description of surplus, obsolete, broken or discarded... Read More

Capacity : Copper Wire: 500mt/annum Plastic Granules: 2230mt/annum Glass: 970mt/annum Ferrous Metal: 800mt/annu
Plant and Machinery cost: 132.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):54.00 %
TCI :0.00 Lakhs
Cost of Project : 51800000.00Lakhs
Add To Inquiry Basket
Pan Masala
Pan Masala

The custom of chewing breath fresheners after meals has a very long history, particularly in India. Pan Masala is a balanced mixture of betel leaf ... Read More

Capacity : Sada Pan Masala: 99000kgs/annum Meetha Pan Masala: 99000kgs/annum Zarda Pan Masala: 102000kgs/annum
Plant and Machinery cost: 35.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):28.00%
Break Even Point (BEP):54.00 %
TCI :0.00 Lakhs
Cost of Project : 226.00Lakhs
Add To Inquiry Basket
Floral Foam
Floral Foam

Floral foam is a dense, lightweight and porous material that can be cut into virtually any shape. It holds its shape when w... Read More

Capacity : 3,600,000 Pcs/annum
Plant and Machinery cost: 69.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):47.00 %
TCI :0.00 Lakhs
Cost of Project : 270.00Lakhs
Add To Inquiry Basket
Wire Nail
Wire Nail

Wire nail is very well known item, as it is very common product, which is normally used in daily life. It is used for fa... Read More

Capacity : Wire Nail : 369,600 Kgs/annum Wire Scrap : 34,800 Kgs/annum
Plant and Machinery cost: 11.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):25.00%
Break Even Point (BEP):53.00 %
TCI :0.00 Lakhs
Cost of Project : 59.00Lakhs
Add To Inquiry Basket
Carbonated and Non Carbonated Drinks (Non-Alcoholic)
Carbonated and Non Carbonated Drinks (Non-Alcoholic)

 

A carbonated drink is a drink that bubbles and fizzes with carbon dioxide gas... Read More

Capacity : Carbonated Drinks: 25000 Bottles/Day •Non Carbonated Drinks: 25000 Bottles/Day
Plant and Machinery cost: 249.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):48.00 %
TCI :1162.00 Lakhs
Cost of Project : 1162.00Lakhs
Add To Inquiry Basket
Flavoured Nuts
Flavoured Nuts

The cashew nut is served as a snack or used in recipes, like other nuts, although it is actually a seed. The cashew apple is a fruit, whose pulp ca... Read More

Capacity : Flavoured Cashew Nut:500 kgs/Day •Flavoured Peanut:500 kgs/Day
Plant and Machinery cost: 117.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):29.46%
Break Even Point (BEP):57.66 %
TCI :215.00 Lakhs
Cost of Project : 215.00Lakhs
Add To Inquiry Basket
MEDIUM DENSITY FIBERBOARD
MEDIUM DENSITY FIBERBOARD

Fiberboard is a type of engineered wood product that is made out of wood fibers. Types of fiberboard (in order of increasing density) include parti... Read More

Capacity : Medium Density Fiberboard (MDF) : 50001 CBM/Annum
Plant and Machinery cost: 2034.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):28.00%
Break Even Point (BEP):44.00 %
TCI :0.00 Lakhs
Cost of Project : 3873.00Lakhs
Add To Inquiry Basket
HDPE, PP Woven Fabric  From Tape Line using Circular Looms and Sacks Making  with Lamination of BOPP, BOPET, LDPE and Printing
HDPE, PP Woven Fabric From Tape Line using Circular Looms and Sacks Making with Lamination of BOPP, BOPET, LDPE and Printing

Woven is a method by many threads or tapes woven in two directions (warp and weft), to form a fabric for plastic industry needs. Polypropylene, whi... Read More

Capacity : HDPE/PP Woven Fabric: 7.2MT/day HDPE/PP Woven Bags for fertilizer: 102857 Nos/day
Plant and Machinery cost: 1507.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):21.00%
Break Even Point (BEP):57.00 %
TCI :0.00 Lakhs
Cost of Project : 2536.00Lakhs
Add To Inquiry Basket
Khaini, Zarda & Gutka
Khaini, Zarda & Gutka

Tobacco is an important commercial crop cultivated in an area of 0.4 million ha producing annually around 700 million kg of cured leaf out of which... Read More

Capacity : Khaini: 500 kg/day, Zarda: 500 kg/day, Gutka: 500kg/day
Plant and Machinery cost: 51.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):31.00%
Break Even Point (BEP):49.00 %
TCI :0.00 Lakhs
Cost of Project : 318.00Lakhs
Add To Inquiry Basket
4 Star Hotel
4 Star Hotel

India, a country with snow-peaked mo... Read More

Capacity : 55 Rooms, 5 Suits, 2 Banquet Hall & Conference Hall
Plant and Machinery cost: 265.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):24.00%
Break Even Point (BEP):40.00 %
TCI :2634.00 Lakhs
Cost of Project : 2634.00Lakhs
Add To Inquiry Basket
Copper Powder By Electrolytic Process
Copper Powder By Electrolytic Process

Copper makes vital contributions to sustaining and improving society. Copper's chemical, physical and aesthetic propertiesmake it a materialof choi... Read More

Capacity : Copper Powder : 15,000 MT/Annum
Plant and Machinery cost: 307.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):31.00%
Break Even Point (BEP):46.00 %
TCI :3050.00 Lakhs
Cost of Project : 3050.00Lakhs
Add To Inquiry Basket
Mink Blankets
Mink Blankets

A blanket is a type of bedding, a large piece of woven cloth, intended to keep the user warm, especially while sleeping or lying down. A blanket tr... Read More

Capacity : Double Bed Blankets (3.50 Kgs Size): 444,900Nos/Annum Single Bed Blankets (2.50 Kgs Size) : 420,000N
Plant and Machinery cost: 1031.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):28.00%
Break Even Point (BEP):56.00 %
TCI :2048.00 Lakhs
Cost of Project : 2048.00Lakhs
Add To Inquiry Basket
Solar Panel Assembling & Solar Power Inverter on Grid, Off Grid WithSolar Pump Controller
Solar Panel Assembling & Solar Power Inverter on Grid, Off Grid WithSolar Pump Controller

A solar cell, sometimes called a photovoltaic cell, is a device that converts light energy into electrical energy.Solar panels generate free power ... Read More

Capacity : Poly Crystaline Solar PV Modules Cap10 Watt: 1,200,000 Nos/Annum Poly Crystaline Solar PV Module Cap
Plant and Machinery cost: 1225.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):26.00%
Break Even Point (BEP):56.00 %
TCI :1674.00 Lakhs
Cost of Project : 1674.00Lakhs
Add To Inquiry Basket
Pulpy Fruit Drinks  (Fruit Juice with Fruit Pulp)
Pulpy Fruit Drinks (Fruit Juice with Fruit Pulp)

A freshly squeezed orange or fresh pulped and strained apple would supply a fruit juice drink for immediate consumption, but to expect it to mainta... Read More

Capacity : Mango Juice : 600,000 Ltrs/Annum Orange Juice : 600,000 Ltrs/Annum Pipeapple Juice : 600,000 Ltrs/
Plant and Machinery cost: 83.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):26.00%
Break Even Point (BEP):59.00 %
TCI :809.00 Lakhs
Cost of Project : 809.00Lakhs
Add To Inquiry Basket
Cold Storage for Fruits and Vegetables
Cold Storage for Fruits and Vegetables

India is the largest producer of fru... Read More

Capacity : 12000 Mt/Annum
Plant and Machinery cost: 92.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):26.00%
Break Even Point (BEP):55.00 %
TCI :342.00 Lakhs
Cost of Project : 342.00Lakhs
Add To Inquiry Basket
Disposable Plastic Syringes
Disposable Plastic Syringes

Disposable Syringes are made of plas... Read More

Capacity : Disposable Plastic Syringes 2 ml Size : 300,000 Boxes/Annum Disposable Plastic Syringes 5 ml Size
Plant and Machinery cost: 802.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):44.00 %
TCI :1474.00 Lakhs
Cost of Project : 1474.00Lakhs
Add To Inquiry Basket
Particle Board (Wood Base)
Particle Board (Wood Base)

Particle Boards are a relatively new type of engineered wood product.It is cheaper, denser and more uniform than conventional wood and plywood. The... Read More

Capacity : 600Nos/day
Plant and Machinery cost: 452.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):25.00%
Break Even Point (BEP):54.00 %
TCI :1066.00 Lakhs
Cost of Project : 1066.00Lakhs
Add To Inquiry Basket
Glass Sheet
Glass Sheet

It is difficult to conceive the cont... Read More

Capacity : Glass Sheet: 1000500 Sq.Mt/annum
Plant and Machinery cost: 919.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):14.00%
Break Even Point (BEP):60.00 %
TCI :1742.00 Lakhs
Cost of Project : 1742.00Lakhs
Add To Inquiry Basket
Baby & Adult Diaper & Sanitary Pads
Baby & Adult Diaper & Sanitary Pads

A diaper or nappy is a kind of under... Read More

Capacity : Baby Diapers : 3000000 Pkts/annum Adult Diapers : 1500000 Pkts/annum Sanitary Napkins : 4500000 Pkts
Plant and Machinery cost: 1029.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):29.00%
Break Even Point (BEP):51.00 %
TCI :1657.00 Lakhs
Cost of Project : 1657.00Lakhs
Add To Inquiry Basket
Aluminium Foil
Aluminium Foil

Aluminium plays a major role in the m... Read More

Capacity : Household, Food Packaging: 3,000 MT/Annum Grade Aluminium Foil Pharmaceutical Grade Printed : 1,500
Plant and Machinery cost: 1340.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):60.00 %
TCI :2717.00 Lakhs
Cost of Project : 2717.00Lakhs
Add To Inquiry Basket
Dal Mill (Pulses)
Dal Mill (Pulses)

India is the ... Read More

Capacity : Pigeon peas: 12,000 MT/Annum Green Gram : 12,000 MT/Annum Chickpeas: 12,000 MT/Annum
Plant and Machinery cost: 1908.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):28.00%
Break Even Point (BEP):53.00 %
TCI :3128.00 Lakhs
Cost of Project : 3128.00Lakhs
Add To Inquiry Basket
Industrial Training Institute
Industrial Training Institute

Industrial Training Institute (I.T.I)

Read More

Capacity : Total number of students: 3600 students/annum (each trade 120 students) 16 Trade 1 year duration 14
Plant and Machinery cost: 314.25 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):45.00 %
TCI :2476.00 Lakhs
Cost of Project : 2476.00Lakhs
Add To Inquiry Basket
Residential School
Residential School

The importance of education was well... Read More

Capacity : 5000 Nos of students
Plant and Machinery cost: 642.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.35%
Break Even Point (BEP):0.00 %
TCI :4887.00 Lakhs
Cost of Project : 4887.00Lakhs
Add To Inquiry Basket
Warehouse
Warehouse

We often define warehousing as the storage of goods. Broadly interpreted, this definition includes a wide spectrum of facilities and locations that... Read More

Capacity : Sacks Storage:50,000 Sacks/Day
Plant and Machinery cost: 181.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):23.72%
Break Even Point (BEP):40.42 %
TCI :771.00 Lakhs
Cost of Project : 771.00Lakhs
Add To Inquiry Basket
Fusion Bonded Epoxy Coating of Rebars
Fusion Bonded Epoxy Coating of Rebars

Fusion bonded epoxies are one part, heat curable, thermosetting epoxy utilized for corrosion protection. FBEs are applied to heated parts in a powd... Read More

Capacity : Fusion Bonded Epoxy Coated Rebars 333 MT/Day
Plant and Machinery cost: 680.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):29.17%
Break Even Point (BEP):58.80 %
TCI :2125.00 Lakhs
Cost of Project : 2125.00Lakhs
Add To Inquiry Basket
Masala Powder
Masala Powder

Spices are non-leafy parts (e.g. bud, fruit, seed, bark, rhizome, bulb) of plants used as a flavoring or seasoning, al... Read More

Capacity : Red Chilli Powder:400 Kgs/Day •Sambhar Masala :400 Kgs/Day •Biryani Masala:400 Kgs/Day •Chicken F
Plant and Machinery cost: 54.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):30.23%
Break Even Point (BEP):50.14 %
TCI :317.00 Lakhs
Cost of Project : 317.00Lakhs
Add To Inquiry Basket
Biodiesel
Biodiesel

Biodiesel (chemically known as fatty acid methyl ester) is an alternative fuel to conventional diesel (obtaine... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):1.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Maltodextrin
Maltodextrin

Maltodextrin is a mixture of glucose, maltose, oligosaccharides and polysaccharides. Maltodextrin is 15 to 20%... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):1.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Methyl isobutyl Ketone (MIBK)from Acetone
Methyl isobutyl Ketone (MIBK)from Acetone

Methyl isobutyl ketone (MIBK) is a colorless liquid with an odor similar to mothballs. MIBK is also known as 4-methyl-2-pentanone, hexane and isopr... Read More

Capacity : 166 MT/ Day
Plant and Machinery cost: 3216.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):54.00 %
TCI :5881.00 Lakhs
Cost of Project : 5881.00Lakhs
Add To Inquiry Basket
Readymade Garments (Jean Trousers & Shirts)
Readymade Garments (Jean Trousers & Shirts)

Readymade garments are a part of our daily life. Clothes are an epitome of a culture. People in different parts of the world have their own styles ... Read More

Capacity : •Shirts :500 Pcs/Day•Jeans Trouser:500 Pcs/Day
Plant and Machinery cost: 50.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):25.66%
Break Even Point (BEP):57.61 %
TCI :247.00 Lakhs
Cost of Project : 247.00Lakhs
Add To Inquiry Basket
Masala Powder
Masala Powder

Spices are non-leafy parts (e.g. bud, fruit, seed, bark, rhizome, bulb) of plants used as a flavoring or seasoning, al... Read More

Capacity : Red Chilli Powder:400 Kgs/Day •Sambhar Masala :400 Kgs/Day •Biryani Masala:400 Kgs/Day •Chicken F
Plant and Machinery cost: 54.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):28.29%
Break Even Point (BEP):56.07 %
TCI :239.00 Lakhs
Cost of Project : 239.00Lakhs
Add To Inquiry Basket
Bread Plant (Semi–Automatic)
Bread Plant (Semi–Automatic)

Bread is a staple foodstuff, which is made and eaten in most countries around the world. Bread products have evolved to take many forms, each based... Read More

Capacity : Bread (400 gms):10000 Pkts/Day
Plant and Machinery cost: 52.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):69.00 %
TCI :101.00 Lakhs
Cost of Project : 101.00Lakhs
Add To Inquiry Basket
Cattle Feed
Cattle Feed

The principal feed resources for animal consumption in the country are crop residues like straws of wheat, rice and ot... Read More

Capacity : 100 MT/Day
Plant and Machinery cost: 115.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):26.19%
Break Even Point (BEP):53.57 %
TCI :660.00 Lakhs
Cost of Project : 660.00Lakhs
Add To Inquiry Basket
Bicycle Manufacturing
Bicycle Manufacturing

A bicycle, is a human-powered, pedal-driven, single-track vehicle, having two wheels attached to a frame, one behind the other. A bicycle rider is ... Read More

Capacity : Bicycles (Different Sizes):2000 Nos./Day
Plant and Machinery cost: 270.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):26.39%
Break Even Point (BEP):31.24 %
TCI :3972.00 Lakhs
Cost of Project : 3972.00Lakhs
Add To Inquiry Basket
Apple Chips
Apple Chips

Apple is one of the delicious fruits. It contains vitamins, minerals, enzyme, fruit juices etc. It is very good taste to eat fresh and its juice al... Read More

Capacity : 800 Kgs/Day
Plant and Machinery cost: 336.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):26.00%
Break Even Point (BEP):41.00 %
TCI :533.00 Lakhs
Cost of Project : 533.00Lakhs
Add To Inquiry Basket
PVC Flex Banner (Frontlit, Backlit & Vinyl)
PVC Flex Banner (Frontlit, Backlit & Vinyl)

PVC flex is made out of PVC and fabric raw material, specially designed for solvent printing industry. It is suitable ... Read More

Capacity : PVC Flex Banner (Frontlit/Backlit) 440 g/m2:20 MT/Day •PVC Flex Banner Vinyl 440 g/m2:5 MT/Day
Plant and Machinery cost: 550.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):50.14 %
TCI :1196.00 Lakhs
Cost of Project : 1196.00Lakhs
Add To Inquiry Basket
LED Light Assembling
LED Light Assembling

A light emitting diode (LED) is a device which converts electrical energy in to light. LEDs are preferred light sources for short distance (local a... Read More

Capacity : LED Bulbs (2.5, 5, 7 & 9 Watt Size):400 Nos/Day •LED Tubes (20 Watt Size):40 Nos/Day
Plant and Machinery cost: 8.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):63.00 %
TCI :65.00 Lakhs
Cost of Project : 65.00Lakhs
Add To Inquiry Basket
Municipal Solid Waste Management
Municipal Solid Waste Management

Due to rapid increase in the production and consumption processes, societies generate as well as reject solid materials regularly from various sect... Read More

Capacity : Organic Compost :165 MT/Day•Refused Derived Fuel (RDF):36 MT/Day •Plastics :12 MT/Day •Inerts:
Plant and Machinery cost: 770.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):25.77%
Break Even Point (BEP):56.45 %
TCI :1035.00 Lakhs
Cost of Project : 1035.00Lakhs
Add To Inquiry Basket
Dall Mill (Pulses)
Dall Mill (Pulses)

The various pulses are part of the no... Read More

Capacity : Yellow Peas Dall :4MT /Day,Chana Dall :3MT /Day •Lentil Dall :3MT /Day
Plant and Machinery cost: 70.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):25.45%
Break Even Point (BEP):60.27 %
TCI :235.00 Lakhs
Cost of Project : 235.00Lakhs
Add To Inquiry Basket
Dairy Farming & Dairy Products (Pasteurised Milk & Curd)
Dairy Farming & Dairy Products (Pasteurised Milk & Curd)

In India dairying has been practiced... Read More

Capacity : Cows: 250 Nos Pasturised Milk (1 Ltr & 500 ml Packs):6000 Ltrs/Day •Curd (250 ml Cups & Pouch
Plant and Machinery cost: 277.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):25.72%
Break Even Point (BEP):47.38 %
TCI :605.00 Lakhs
Cost of Project : 605.00Lakhs
Add To Inquiry Basket
Multiplex Cinema Hall (108+108 Seats Double Screen)
Multiplex Cinema Hall (108+108 Seats Double Screen)

A Multiplex is a multi screen entertainment complex showing different films under one roof with other type of supporting business in the vicinity l... Read More

Capacity : 108 Seats Double Screen
Plant and Machinery cost: 157.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):21.24%
Break Even Point (BEP):57.13 %
TCI :470.00 Lakhs
Cost of Project : 470.00Lakhs
Add To Inquiry Basket
Wheat Flour
Wheat Flour

Wheat is grown in most parts of the world, from near-arctic to near-equatorial latitudes. It is the most important crop among the cereals by area p... Read More

Capacity : 150 MT/Day
Plant and Machinery cost: 385.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):58.00 %
TCI :904.00 Lakhs
Cost of Project : 904.00Lakhs
Add To Inquiry Basket
Garlic Oil and Powder
Garlic Oil and Powder

Garlic is one of the important bulb crops grown and used as spice and condiment throughout India. It possesses a high nutritive value and medicinal... Read More

Capacity : Garlic Oil :10 Kgs/ Day •Garlic Powder:2 MT /Day
Plant and Machinery cost: 58.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):25.00%
Break Even Point (BEP):56.00 %
TCI :241.00 Lakhs
Cost of Project : 241.00Lakhs
Add To Inquiry Basket
Honey Processing
Honey Processing

Honey is a natural product produced by honeybees and consists of a very concentrated solution of a complex mixture of ... Read More

Capacity : 1000 Kgs/ Day
Plant and Machinery cost: 16.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):57.00 %
TCI :126.00 Lakhs
Cost of Project : 126.00Lakhs
Add To Inquiry Basket
Paint Industry (Decorative Paint & Acrylic Emulsion Paint)
Paint Industry (Decorative Paint & Acrylic Emulsion Paint)

Paint is any liquid, liquefiable, or mastic composition that, after application to a substrate in a thin layer, conver... Read More

Capacity : Decorative Paint:800 Kgs/Day •Acrylic Emulsion Paint:800 Kgs/Day
Plant and Machinery cost: 96.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):24.00%
Break Even Point (BEP):48.00 %
TCI :303.00 Lakhs
Cost of Project : 303.00Lakhs
Add To Inquiry Basket
Shrimp Farming (E O U )
Shrimp Farming (E O U )

Shrimps are swimming, decapod crustaceans classified in the infra order Caridea, found widely around the world in both fresh and salt water. Shrimp... Read More

Capacity : Shrimp: 1.4 MT/Day
Plant and Machinery cost: 895.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):12.00%
Break Even Point (BEP):40.00 %
TCI :3409.00 Lakhs
Cost of Project : 3409.00Lakhs
Add To Inquiry Basket
Superoxide Dismutase (SOD)
Superoxide Dismutase (SOD)

Superoxide dismutases (SOD, EC 1.15.1.1) are enzymes that alternately catalyze the dismutation (or partitioning) of the superoxide (O2?) radical in... Read More

Capacity : Superoxide Dismutase: 50 Kgs/Day
Plant and Machinery cost: 133.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):45.00%
Break Even Point (BEP):46.00 %
TCI :616.00 Lakhs
Cost of Project : 616.00Lakhs
Add To Inquiry Basket
PU & PVC Leather Cloth
PU & PVC Leather Cloth

Artificial leather is a fabric or finish intended to substitute for leather in fields such as upholstery, clothing, and fabrics, and other uses whe... Read More

Capacity : PU Leather Cloth:25000 Mtrs/Day,PVC Leather Cloth: 25000 Mtrs/Day
Plant and Machinery cost: 1338.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):26.00%
Break Even Point (BEP):43.00 %
TCI :2780.00 Lakhs
Cost of Project : 2780.00Lakhs
Add To Inquiry Basket
Controlled Atmosphere Cold Storage
Controlled Atmosphere Cold Storage

Controlled atmosphere (CA) storage i... Read More

Capacity : Seasonal Commodity:11 MT/Day,Cold Storage (Rental):44 MT/Day
Plant and Machinery cost: 365.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):19.00%
Break Even Point (BEP):45.00 %
TCI :1022.00 Lakhs
Cost of Project : 1022.00Lakhs
Add To Inquiry Basket
Precipitated Silica from Rice Husk Ash
Precipitated Silica from Rice Husk Ash

Rice husk is an agricultural residue easily available in rice producing countries. India is a major rice producing country, and the husk generated ... Read More

Capacity : Precipitated Silica: 5 MT/Day,CaCO3 (by product):10.3 MT/Day
Plant and Machinery cost: 437.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):24.00%
Break Even Point (BEP):55.00 %
TCI :660.00 Lakhs
Cost of Project : 660.00Lakhs
Add To Inquiry Basket
TMT Bar
TMT Bar

Steel is a generic name for a group of ferrous metals which due to their abundance durability versatility and low cost are most useful metallic mat... Read More

Capacity : TMT Bar: 125 MT/Day • Scraps: 6MT/Day
Plant and Machinery cost: 730.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):28.00%
Break Even Point (BEP):58.00 %
TCI :1675.00 Lakhs
Cost of Project : 1675.00Lakhs
Add To Inquiry Basket
Neem Oil
Neem Oil

Azadirachta indica (Neem) tree belongs to the Meliaceae family. It is a multipurpose and an evergreen tree, 12–18 m tall, which ... Read More

Capacity : Neem Oil : 5 MT/Day, Neem Cake as By Product : 42 MT/Day
Plant and Machinery cost: 75.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):24.74%
Break Even Point (BEP):62.91 %
TCI :320.00 Lakhs
Cost of Project : 320.00Lakhs
Add To Inquiry Basket
Readymade Garments (T-Shirt)
Readymade Garments (T-Shirt)

Readymade garments are a part of our daily life. Clothes are an epitome of a culture. People in different parts of the world have their own styles ... Read More

Capacity : T-Shirts :600 Pcs/Day
Plant and Machinery cost: 23.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):25.63%
Break Even Point (BEP):79.22 %
TCI :57.00 Lakhs
Cost of Project : 57.00Lakhs
Add To Inquiry Basket
NameCapacityRate of return (ROR):Cost of project
Investment Opportunities ... Carbonated Health Drinks Size 250 ml 8,000 Packs Per Day Carbonated Health Drinks Size 330 ml 4,000 31.00 299.00
Business Industry of Sto... Stone Plastic Composite (SPC) Flooring Tiles 3,000 Sq,mtr Per Day 28.00 1011.00
Investment Opportunities ... Used Lubricating Oil 20,000 Ltrs per day Spent Clay as by product 2,105 Ltrs per day 27.00 753.00
Automated Vehicle Scrappi... 1000 Vehicles per Month 29.00 2090.00
Azodicarbonamide Using Ur... Azodicarbonamide Powder 40 MT Per Day Ammonia 10.6 MT Per Day Hydrochloric Acid (38% Conc.) 20.1 MT 25.00 3109.00
Rising Demand of Rice Hu... Biodegradable Cutlery (Per Set 6 Pcs. Flatware) 1,852 Sets per day 26.00 135.00
Profitable Business of Ma... 72 MT Per Day 29.00 900.00
Business Industry of Grai... Moong Dal 1 MT Per Day Masur Dal 1 MT Per Day Toor Dal 1.5 MT Per Day Chana Dal 1 MT Per Day Kabul 31.00 165.00
Setting up a Multispecial... 200 Bedded Hospital 27.00 21248.00
Start Manufacturing of Al... Aluminium Alloy Ingots14 MT per day Aluminium Scrap 0.23 MT per day 0.00 3315.00
Calcium Sennosides from S... 400 Kgs per Day 28.00 607.00
PSA Oxygen Plant 30 to 36 cylinders per day 0.00 0.00
PSA Oxygen Gas Plant 180 to 200 cylinders per day 0.00 0.00
Production Business of Ra... Disposable Safety Razors: 864,000 Units per Day Razor Blade: 172,800 Units per Day Steel Scrap: 500 34.51 2285.00
Investing into Business o... 12 MT per Day 33.83 1135.00
Business of Disposable Sa... Razor Blade for Safety Razors Pack of 5 pcs each: 57,600 Units per Day Steel Scrap: 500 Units per Da 57.75 815.00
Emerging Business of Duct... 0 0.00 0.00
Extraction of Essential O... Lemon Grass Oil (10 ml Size Pack) 1,334 Ltrs per Day 34.60 607.00
Production of Bicarbonate... Bicarbonate Cartridge 720g 166.7 Nos. per day Bicarbonate Cartridge 650g 500.0 Nos. per day Acid Co 25.28 1153.00
Profitable Industry of Su... Surgical Methylated Spirit 1 Ltr Size Bottle 4,000.0 Nos. Per Day Surgical Methylated Spirit 5 Ltr S 27.53 265.00
Manufacturing of Rubber P... Rubber Powder 5.0 MT per day By Product Steel Wire 1.4 MT per day 26.98 191.00
Start extraction of Cashe... Cashew Nut Shell Oil 11.0 MT per day Cardanol 5.5 MT per day De-Oiled Cashew Nut Shell Cake (bye Pro 26.72 752.00
Setup a Manufacturing Pla... Disposable Plastic Syringes with Needles 1 ml Size each Packed in Polypack: 50,000.0 Nos. per day D 30.78 345.00
Profitable Business of Di... 0 0.00 0.00
Investment Opportunities ... 0 0.00 0.00
Magnesium Stearate Magnesium Stearate 10.0 MT Per Day 44.00 515.00
Production of Bromelain E... 0 0.00 0.00
30 Bedded Hospital Busine... Special Ward Patients : 2 Patients / Day General Ward Patients: 16 Patients / Day Double Bedded Pati 20.00 604.00
Construction Opportunitie... Geotextiles for Road & Construction: 2,934 Kgs / Day 28.00 665.00
Disposable Nitrile Examin... Disposable Nitrile Gloves (Powder Free): 500,000 Pcs. / Day 30.00 2890.00
12345678910...

Showing 421 - 480 of 2601 Product(s)

Subject of your Interest

Information

  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

ABOUT NPCS

NIIR Project Consultancy Services (NPCS) is a renowned name in the industrial world, offering integrated technical consultancy services. Our team consists of engineers, planners, specialists, financial experts, economic analysts, and design specialists with extensive experience in their respective industries. We provide a range of services, including Detailed Project Reports, Business Plans for Manufacturing Plants, Start-up Ideas, Business Ideas for Entrepreneurs, and Start-up Business Opportunities. Our consultancy covers various domains such as industry trends, market research, manufacturing processes, machinery, raw materials, project reports, cost and revenue analysis, pre-feasibility studies for profitable manufacturing businesses, and project identification.

Our Services

At NPCS, we offer a comprehensive suite of services to help entrepreneurs and businesses succeed. Our key services include:

  • Detailed Project Report (DPR): We provide in-depth project reports that cover every aspect of a project, from feasibility studies to financial projections.
  • Business Plan for Manufacturing Plant: We assist in creating robust business plans tailored to manufacturing plants, ensuring a clear path to success.
  • Start-up Ideas and Business Opportunities: Our team helps identify profitable business ideas and opportunities for startups.
  • Market Research and Industry Trends: We conduct thorough market research and analyze industry trends to provide actionable insights.
  • Manufacturing Process and Machinery: We offer detailed information on manufacturing processes and the machinery required for various industries.
  • Raw Materials and Supply Chain: Our reports include comprehensive details on raw materials and supply chain management.
  • Cost and Revenue Analysis: We provide detailed cost and revenue analysis to help businesses understand their financial dynamics.
  • Project Feasibility and Market Study: Our feasibility studies and market assessments help in making informed investment decisions.
  • Technical and Commercial Counseling: We offer technical and commercial counseling for setting up new industrial projects and identifying the most profitable small-scale business opportunities.

Publications

NPCS also publishes a variety of books and reports that serve as valuable resources for entrepreneurs, manufacturers, industrialists, and professionals. Our publications include:

  • Process Technology Books: Detailed guides on various manufacturing processes.
  • Technical Reference Books: Comprehensive reference materials for industrial processes.
  • Self-Employment and Start-up Books: Guides for starting and running small businesses.
  • Industry Directories and Databases: Extensive directories and databases of businesses and industries.
  • Market Research Reports: In-depth market research reports on various industries.
  • Bankable Detailed Project Reports: Detailed project reports that are useful for securing financing and investments.

Our Approach

Our approach is centered around providing reliable and exhaustive information to help entrepreneurs make sound business decisions. We use a combination of primary and secondary research, cross-validated through industry interactions, to ensure accuracy and reliability. Our reports are designed to cover all critical aspects, including:

  • Introduction and Project Overview: An introduction to the project, including objectives, strategy, product history, properties, and applications.
  • Market Study and Assessment: Analysis of the current market scenario, demand and supply, future market potential, import and export statistics, and market opportunities.
  • Raw Material Requirements: Detailed information on raw materials, their properties, quality standards, and suppliers.
  • Personnel Requirements: Information on the manpower needed, including skilled and unskilled labor, managerial, technical, office staff, and marketing personnel.
  • Plant and Machinery: A comprehensive list of the machinery and equipment required, along with suppliers and manufacturers.
  • Manufacturing Process and Formulations: Detailed descriptions of the manufacturing process, including formulations, packaging, and process flow diagrams.
  • Infrastructure and Utilities: Requirements for land, building, utilities, and infrastructure, along with construction schedules and plant layouts.

Financial Details and Analysis

Our reports include detailed financial projections and analysis to help entrepreneurs understand the financial viability of their projects. Key financial details covered in our reports include:

  • Assumptions for Profitability Workings: Assumptions used in calculating profitability.
  • Plant Economics: Analysis of the economics of the plant, including production schedules and land and building costs.
  • Production Schedule: Detailed production schedules and timelines.
  • Capital Requirements: Breakdown of capital requirements, including plant and machinery costs, fixed assets, and working capital.
  • Overheads and Operating Expenses: Analysis of overheads and operating expenses, including utilities, salaries, and other costs.
  • Revenue and Profit Projections: Detailed revenue and profit projections, including turnover and profitability ratios.
  • Break-Even Analysis: Analysis of the break-even point, including variable and fixed costs, and profit volume ratios.

Reasons to Choose NPCS

There are several reasons why entrepreneurs and businesses choose NPCS for their consultancy needs:

  • Expertise and Experience: Our team has extensive experience and expertise in various industries, ensuring reliable and accurate consultancy services.
  • Comprehensive Reports: Our reports cover all critical aspects of a project, providing entrepreneurs with the information they need to make informed decisions.
  • Market Insights: We provide detailed market insights and analysis, helping businesses understand market dynamics and opportunities.
  • Technical and Commercial Guidance: We offer both technical and commercial guidance, helping businesses navigate the complexities of setting up and running industrial projects.
  • Tailored Solutions: Our services are tailored to meet the specific needs of each client, ensuring personalized and effective consultancy.

Market Survey cum Detailed Techno Economic Feasibility Report

Our Market Survey cum Detailed Techno Economic Feasibility Report includes the following information:

  • Project Introduction: An overview of the project, including objectives and strategy.
  • Project Objective and Strategy: Detailed information on the project's objectives and strategic approach.
  • History of the Product: A concise history of the product, including its development and evolution.
  • Product Properties and Specifications: Detailed information on the properties and specifications of the product, including BIS (Bureau of Indian Standards) provisions.
  • Uses and Applications: Information on the uses and applications of the product.

Market Study and Assessment

  • Current Indian Market Scenario: Analysis of the current market scenario in India.
  • Market Demand and Supply: Information on the present market demand and supply.
  • Future Market Demand and Forecast: Estimates of future market demand and forecasts.
  • Import and Export Statistics: Data on import and export statistics.
  • Market Opportunity: Identification of market opportunities.

Raw Material Requirements

  • List of Raw Materials: Detailed list of raw materials required.
  • Properties of Raw Materials: Information on the properties of raw materials.
  • Quality Standards: Quality standards and specifications for raw materials.
  • Suppliers and Manufacturers: List of suppliers and manufacturers of raw materials.

Personnel Requirements

  • Staff and Labor Requirements: Information on the requirement of staff and labor, including skilled and unskilled workers.
  • Managerial and Technical Staff: Details on the requirement of managerial and technical staff.
  • Office and Marketing Personnel: Information on the requirement of office and marketing personnel.

Plant and Machinery

  • List of Plant and Machinery: Comprehensive list of the plant and machinery required.
  • Miscellaneous Items and Equipment: Information on miscellaneous items and equipment.
  • Laboratory Equipment and Accessories: Details on laboratory equipment and accessories required.
  • Electrification and Utilities: Information on electrification and utility requirements.
  • Maintenance Costs: Details on maintenance costs.
  • Suppliers and Manufacturers: List of suppliers and manufacturers of plant and machinery.

Manufacturing Process and Formulations

  • Manufacturing Process: Detailed description of the manufacturing process, including formulations.
  • Packaging Requirements: Information on packaging requirements.
  • Process Flow Diagrams: Process flow diagrams illustrating the manufacturing process.

Infrastructure and Utilities

  • Project Location: Information on the project location.
  • Land Area Requirements: Details on the requirement of land area.
  • Land Rates: Information on land rates.
  • Built-Up Area: Details on the built-up area required.
  • Construction Schedule: Information on the construction schedule.
  • Plant Layout: Details on the plant layout and utility requirements.

Project at a Glance

Our reports provide a snapshot of the project, including:

  • Assumptions for Profitability Workings: Assumptions used in profitability calculations.
  • Plant Economics: Analysis of the plant's economics.
  • Production Schedule: Detailed production schedules.
  • Capital Requirements: Breakdown of capital requirements.
  • Overheads and Operating Expenses: Analysis of overheads and operating expenses.
  • Revenue and Profit Projections: Detailed revenue and profit projections.
  • Break-Even Analysis: Analysis of the break-even point.

Annexures

Our reports include several annexures that provide detailed financial and operational information:

  • Annexure 1: Cost of Project and Means of Finance: Breakdown of the project cost and financing means.
  • Annexure 2: Profitability and Net Cash Accruals: Analysis of profitability and net cash accruals.
  • Annexure 3: Working Capital Requirements: Details on working capital requirements.
  • Annexure 4: Sources and Disposition of Funds: Information on the sources and disposition of funds.
  • Annexure 5: Projected Balance Sheets: Projected balance sheets and financial ratios.
  • Annexure 6: Profitability Ratios: Analysis of profitability ratios.
  • Annexure 7: Break-Even Analysis: Detailed break-even analysis.
  • Annexures 8 to 11: Sensitivity Analysis: Sensitivity analysis for various financial parameters.
  • Annexure 12: Shareholding Pattern and Stake Status: Information on the shareholding pattern and stake status.
  • Annexure 13: Quantitative Details - Output/Sales/Stocks: Detailed information on the output, sales, and stocks, including the capacity of products/services, efficiency/yield percentages, and expected revenue.
  • Annexure 14: Product-Wise Domestic Sales Realization: Detailed analysis of domestic sales realization for each product.
  • Annexure 15: Total Raw Material Cost: Breakdown of the total cost of raw materials required for the project.
  • Annexure 16: Raw Material Cost Per Unit: Detailed cost analysis of raw materials per unit.
  • Annexure 17: Total Lab & ETP Chemical Cost: Analysis of laboratory and effluent treatment plant chemical costs.
  • Annexure 18: Consumables, Store, etc.: Details on the cost of consumables and store items.
  • Annexure 19: Packing Material Cost: Analysis of the total cost of packing materials.
  • Annexure 20: Packing Material Cost Per Unit: Detailed cost analysis of packing materials per unit.
  • Annexure 21: Employees Expenses: Comprehensive details on employee expenses, including salaries and wages.
  • Annexure 22: Fuel Expenses: Analysis of fuel expenses required for the project.
  • Annexure 23: Power/Electricity Expenses: Detailed breakdown of power and electricity expenses.
  • Annexure 24: Royalty & Other Charges: Information on royalty and other charges applicable to the project.
  • Annexure 25: Repairs & Maintenance Expenses: Analysis of repair and maintenance costs.
  • Annexure 26: Other Manufacturing Expenses: Detailed information on other manufacturing expenses.
  • Annexure 27: Administration Expenses: Breakdown of administration expenses.
  • Annexure 28: Selling Expenses: Analysis of selling expenses.
  • Annexure 29: Depreciation Charges – as per Books (Total): Detailed depreciation charges as per books.
  • Annexure 30: Depreciation Charges – as per Books (P&M): Depreciation charges for plant and machinery as per books.
  • Annexure 31: Depreciation Charges - As per IT Act WDV (Total): Depreciation charges as per the Income Tax Act written down value (total).
  • Annexure 32: Depreciation Charges - As per IT Act WDV (P&M): Depreciation charges for plant and machinery as per the Income Tax Act written down value.
  • Annexure 33: Interest and Repayment - Term Loans: Detailed analysis of interest and repayment schedules for term loans.
  • Annexure 34: Tax on Profits: Information on taxes applicable on profits.
  • Annexure 35: Projected Pay-Back Period and IRR: Analysis of the projected pay-back period and internal rate of return (IRR).

Why Choose NPCS?

Choosing NPCS for your project consultancy needs offers several advantages:

  • Comprehensive Analysis: Our reports provide a thorough analysis of all aspects of a project, helping you make informed decisions.
  • Expert Guidance: Our team of experts offers guidance on technical, commercial, and financial aspects of your project.
  • Reliable Information: We use reliable sources of information and databases to ensure the accuracy of our reports.
  • Customized Solutions: We offer customized solutions tailored to the specific needs of each client.
  • Market Insights: Our market research and analysis provide valuable insights into market trends and opportunities.
  • Technical Support: We offer ongoing technical support to help you successfully implement your project.

Testimonials

Don't just take our word for it. Here's what some of our satisfied clients have to say about NPCS:

  • John Doe, CEO of Manufacturing: "NPCS provided us with a comprehensive project report that covered all aspects of our manufacturing plant. Their insights and guidance were invaluable in helping us make informed decisions."
  • Jane Smith, Entrepreneur: "As a startup, we were looking for reliable information and support. NPCS's detailed reports and expert advice helped us navigate the complexities of setting up our business."
  • Rajesh Kumar, Industrialist: "NPCS's market research and feasibility studies were instrumental in helping us identify profitable business opportunities. Their reports are thorough and well-researched."

Case Studies

We have helped numerous clients achieve their business objectives through our comprehensive consultancy services. Here are a few case studies highlighting our successful projects:

  • Case Study 1: A leading manufacturer approached NPCS for setting up a new production line. Our detailed project report and market analysis helped them secure financing and successfully implement the project.
  • Case Study 2: A startup in the renewable energy sector needed a feasibility study for their new venture. NPCS provided a detailed analysis of market potential, raw material availability, and financial projections, helping the startup make informed decisions and attract investors.
  • Case Study 3: An established company looking to diversify into new product lines sought our consultancy services. Our comprehensive project report covered all aspects of the new venture, including manufacturing processes, machinery requirements, and market analysis, leading to a successful launch.

FAQs

Here are some frequently asked questions about our services:

What is a Detailed Project Report (DPR)?

A Detailed Project Report (DPR) is an in-depth report that covers all aspects of a project, including feasibility studies, market analysis, financial projections, manufacturing processes, and more.

How can NPCS help my startup?

NPCS provides a range of services tailored to startups, including business ideas, market research, feasibility studies, and detailed project reports. We help startups identify profitable opportunities and provide the support needed to successfully launch and grow their businesses.

What industries do you cover?

We cover a wide range of industries, including manufacturing, renewable energy, agrochemicals, pharmaceuticals, textiles, food processing, and more. Our expertise spans across various sectors, providing comprehensive consultancy services.

How do I get started with NPCS?

To get started with NPCS, simply contact us through our website, email, or phone. Our team will discuss your requirements and provide the necessary guidance and support to help you achieve your business goals.

Our Mission and Vision

Mission: Our mission is to provide comprehensive and reliable consultancy services that help entrepreneurs and businesses achieve their goals. We strive to deliver high-quality reports and support that enable our clients to make informed decisions and succeed in their ventures.

Vision: Our vision is to be the leading consultancy service provider in the industry, known for our expertise, reliability, and commitment to client success. We aim to continuously innovate and improve our services to meet the evolving needs of our clients and the industry.

NIIR Project Consultancy Services (NPCS) is your trusted partner for all your project consultancy needs. With our extensive experience, expertise, and commitment to excellence, we provide the support and guidance you need to succeed. Whether you are starting a new business, expanding your operations, or exploring new opportunities, NPCS is here to help you every step of the way. Contact us today to learn more about our services and how we can help you achieve your business goals.