India is a leading player in edible oils, being the world’s largest importer (ahead of the EU and China) and the world’s third-largest consumer (after China and the EU).A growing population, increasing rate of consumption and increasing per capita income are accelerating the demand for edible oil in India.

India is one of the largest producers of oilseeds in the world and this sector occupies an important position in the agricultural economy. Oilseeds and edible oils are two of the most sensitive essential commodities.  India grows oilseeds on an area of over 26 million hectares, with productivity of around 1000 kg a hectare. But self –reliance in edible oils is not in sight and the country imports almost half of its edible oil requirements.

India has a wide range of oilseeds crops grown in its different agro climatic zones. Groundnut, mustard/rapeseed, sesame, safflower, linseed, castor are the major traditionally cultivated oilseeds.  Soyabean and sunflower have also assumed importance in recent years. Coconut is most important amongst the plantation crops. Among the non-conventional oils, rice bran oil and cottonseed oil are the most important. The Indian edible oil industry is composed of some 15,000 oil mills, 600 solvent extraction units, 250 vanaspati units and about 400 refining units.

The National council of Applied Economic Research has projected the demand for edible oils under three scenarios on the basis of per capita income growing annually by 4%, 5% and 6%.Under the low growth scenario, the demand was to rise to 22.8 million tones, under medium growth scenario to 25.9 million tones and under high growth scenario to 29.4 million tones in the near future. The edible oil industry is largely dominated by the bulk segment. Unbranded segment accounts for anywhere between 80 and 90% of the total consumption. Imports are taking place in two forms-refined and crude oil. A large part of the crude oil gets sold as unbranded oil. The share of raw oil, refined oil and vanaspati in the total edible oil market is estimated at 35%, 55% and 10% respectively.

Coming to the non edible oil sector, there has been a great potential for production of bio-fuels like bio-ethanol and biodiesel. The country has been hit hard by the increased cost and uncertainty and so is exploring other energy sources occurring, bio-diesel, extracted from trees is one such alternative under consideration. Bio-diesel would be cheap to produce as it can be extracted from certain species of tree that are common in many parts of India. Due to the concern on the availability of recoverable fossil fuel reserves and the environmental problems caused by the use those fossil fuels, considerable attention has been given to biodiesel production as an alternative to petrodiesel. The focus is on biodiesel production which is produced from vegetable oils, animal fats or non-edible oils. Talking of non edible oils, the castor oil presently bears a great importance in this sector. Castor oil is one of the most useful plant oils. Castor Oil, in various grades, is used in pharmaceuticals, food and other industries. In addition, castor oil and its derivatives & castor-based oleochemicals are the source of a number of useful oleochemicals.

India’s edible oil imports increased to 6.12 lakh tonnes in the fiscal ended March 2010 while the non-edible oil imports fell to 20,575 tonnes, according to the Solvent Extractors Association.
The fall in the imports of non-edible oil was due to the higher imports due to the larger stocks at ports for lift and in pipelines. The country had imported 6.41 lakh tonnes of vegetable oils comprising edible and non-edible oil in March 2009. However, the overall import of vegetable oils rose 4.3% to 37.47 lakh tonnes during November 2009 to March 2010 compared with 35.92 lakh tonnes in the corresponding period of the previous year. Non-edible oil imports rose by 2.5% to 1.62 lakh tonnes during November 2009 to March 2010 compared with 1.58 lakh tonnes in the year-ago period, while edible oils imports increased to 35.85 lakh tonnes from 34.34 lakh tonnes.

Going by the market Statistics, the edible and non edible oil sector is all set for a boom in the market.The edible and non edible oil Industry needs to be strengthened by raising productivity, ensuring a reasonable price to the farmers and levying import duties at a reasonable level. Controls and regulations by government have left the oil industry in a highly competitive market dominated by both domestic and multinational players. It is the right time for an entrepreneur to venture into this sector which is highly profitable.


We can provide you detailed project reports on the following topics. Please select the projects of your interests.
Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the ost of raw material, formulating the cash flow statement, projecting the balance sheet etc.
We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics. Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.


We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Add multiple items to inquiry

Select the items and then press Add to inquiry button

Sort by :
Wetting Oil (Textile Yarn Wetting Agent)
Wetting Oil (Textile Yarn Wetting Agent)

Wetting oils are wetting agents having oily consistency. Wetting agents are surface active agents which when added to water causes it to penetrate ... Read More

Capacity : 1000 Liters/Day
Plant and Machinery cost: 11.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):45.00%
Break Even Point (BEP):43.00 %
TCI :61.00 Lakhs
Cost of Project : 61.00Lakhs
Add To Inquiry Basket
Castor Oil & Its Derivatives
Castor Oil & Its Derivatives

Castor oil obtained by a combination of pressing and extraction from the seeds of castor plants (Ricinus Communis) consist of up to 90% of Triglyce... Read More

Capacity :
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.01%
Break Even Point (BEP):0.01 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Turkey Red Oil
Turkey Red Oil
Turkey red oil which are also known as sulphonated castor oil in the trade is the oldest textile finishing agent. This oil should contain the minimum... Read More
Capacity : 1000 Kgs/Day
Plant and Machinery cost: 10.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):57.00%
Break Even Point (BEP):34.00 %
TCI :46.00 Lakhs
Cost of Project : 46.00Lakhs
Add To Inquiry Basket
Calcium Salt of Higher Fatty Acid using Cotton Seed Oil
Calcium Salt of Higher Fatty Acid using Cotton Seed Oil

Calcium salt of higher fatty is a hard soap. It is mainly used as fatty acids. Calcium salt of higher fatty acids generally is made by using basic ... Read More

Capacity : Calcium Linocate 1.00 MT /Day, Calcium Oleate 525 Kg/Day, Calcium Palmitate400 Kgs/Day
Plant and Machinery cost: 42.00 Lakhs
Working Capital : 67.00
Rate of Return (ROR):69.56%
Break Even Point (BEP):34.91 %
TCI :143.00 Lakhs
Cost of Project : 143.00Lakhs
Add To Inquiry Basket
Patchouli Oil
Patchouli Oil

Patchouli oil is an essential oil, which is produced from the botanical source of plant name Pagosternum cablin. It is extracted from parchouli lea... Read More

Capacity : 50 Kg /Day
Plant and Machinery cost: 21.00 Lakhs
Working Capital : 21.00
Rate of Return (ROR):43.77%
Break Even Point (BEP):62.99 %
TCI :80.00 Lakhs
Cost of Project : 80.00Lakhs
Add To Inquiry Basket
Extraction Of Sesame, Rice Bran & Palm Oil
Extraction Of Sesame, Rice Bran & Palm Oil

Sesame, rice bran and palm oils are used as vegetable oil in the domestic purposes for consumer use. These oils are extracted by using solvent extr... Read More

Capacity : 15.0 MT/Day
Plant and Machinery cost: 103.00 Lakhs
Working Capital : 266.00
Rate of Return (ROR):65.24%
Break Even Point (BEP):38.54 %
TCI :450.00 Lakhs
Cost of Project : 450.00Lakhs
Add To Inquiry Basket
Castor Oil from Castor Seeds Manufacturing Business
Castor Oil from Castor Seeds Manufacturing Business

The castor oil plant, Ricin us common is, may be a species of flowering plant within the spurge family, Euphorbiaceous... Read More

Capacity : Castor Oil: 5 MT / Day Castor De-Oiled Cake: 7.2 MT / Day
Plant and Machinery cost: 106.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):29.00%
Break Even Point (BEP):64.00 %
TCI :0.00 Lakhs
Cost of Project : 374.00Lakhs
Add To Inquiry Basket
Production of Refined Oil (Cotton Seed, Ground Nut & Sunflower Oil)
Production of Refined Oil (Cotton Seed, Ground Nut & Sunflower Oil)

Production of Refined Oil (Cotton Seed, Ground Nut & Sunflower Oil). Awesome Startup... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Soybean and Palm Oil Refining Business
Soybean and Palm Oil Refining Business

Soybean and Palm Oil Refining Business. Refining of Crude Soya Bean and Palm Oil. Opp... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Palm Oil
Palm Oil

Palm oil is a fatty edible vegetable oil, yellowish in color, derived from the flesh and the kernel of the fruit of th... Read More

Capacity : Palm Oil : 500 Ltrs/Day Palm Kernel : 115 Kgs/ Day Palm Fibres (Cake) : 500 Kgs/ Day
Plant and Machinery cost: 32.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):28.00%
Break Even Point (BEP):68.00 %
TCI :0.00 Lakhs
Cost of Project : 75.00Lakhs
Add To Inquiry Basket
Edible Oil Refinery from Crude Palm Oil
Edible Oil Refinery from Crude Palm Oil

Palm oil is edible oil which is extracted from the pulp of fruit of oil palms. The color of pulp is red. That's why cr... Read More

Capacity : 80 MT/Day
Plant and Machinery cost: 1087.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):26.00%
Break Even Point (BEP):49.00 %
TCI :0.00 Lakhs
Cost of Project : 5329.00Lakhs
Add To Inquiry Basket
Palm Oil Production and Processing Industry
Palm Oil Production and Processing Industry

Palm Oil Production and Processing Industry. Profitable Edible Oil Manufacturing Busi... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
How to Start Mustard Oil Mill
How to Start Mustard Oil Mill

How to Start Mustard Oil Mill. Profitable Business Idea. Business with huge Profit in ... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Ghee Manufacturing Unit
Ghee Manufacturing Unit

Ghee, also referred to as clarified butter, is a good alternative to cooking oil and is often used in Indian and Middle Eas... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Virgin Coconut Oil
Virgin Coconut Oil

Virgin coconut oil (VCO) is the purest form of coconut oil. Introduced onto the world market at the end of the 20th century, it is one of the highe... Read More

Capacity : Virgin Coconut Oil (Packed in 1 Ltr Glass Bottle): 945,000/Annum Virgin Coconut Oil (Packed in Capsu
Plant and Machinery cost: 221.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):61.00 %
TCI :440.00 Lakhs
Cost of Project : 440.00Lakhs
Add To Inquiry Basket
Neem Oil
Neem Oil

Azadirachta indica (Neem) tree belongs to the Meliaceae family. It is a multipurpose and an evergreen tree, 12–18 m tall, which ... Read More

Capacity : Neem Oil : 5 MT/Day, Neem Cake as By Product : 42 MT/Day
Plant and Machinery cost: 75.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):24.74%
Break Even Point (BEP):62.91 %
TCI :320.00 Lakhs
Cost of Project : 320.00Lakhs
Add To Inquiry Basket
Light Liquid Paraffin Oil
Light Liquid Paraffin Oil

Light Liquid Paraffin Oil IP is highly purified mixture of liquid saturated hydrocarbons obtained from petroleum and is highly paraffinic in nature... Read More

Capacity : 10 MT/Day
Plant and Machinery cost: 1085.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):25.00%
Break Even Point (BEP):46.00 %
TCI :1560.00 Lakhs
Cost of Project : 1560.00Lakhs
Add To Inquiry Basket
Soya Bean Oil, Soya Paneer & Soya Extract
Soya Bean Oil, Soya Paneer & Soya Extract

Soya bean is one of the most important agro based product, which has commercial value after the rice, wheat, maize etc. Today, soya bean is an impo... Read More

Capacity : 29933 MT/Annum
Plant and Machinery cost: 462.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):51.00 %
TCI :887.00 Lakhs
Cost of Project : 887.00Lakhs
Add To Inquiry Basket
Refining of Crude Soyabean and Palm Oil
Refining of Crude Soyabean and Palm Oil

Soybean oil is very popular with rich value of Omega 3 and Omega 6. Those fatty acids regulate lipid and cholesterol metabolism and prevent narrowi... Read More

Capacity : 34000 MT / Annum
Plant and Machinery cost: 280.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):79.00 %
TCI :1134.00 Lakhs
Cost of Project : 1134.00Lakhs
Add To Inquiry Basket
INTEGRATED UNIT OF RICE MILL, RICE BRAN OIL EXTRACTION WITH CAPTIVE POWER PLANT
INTEGRATED UNIT OF RICE MILL, RICE BRAN OIL EXTRACTION WITH CAPTIVE POWER PLANT

The economics of rice milling industry is largely dependent on the useful commercial utilization of its by-products. T... Read More

Capacity : 0
Plant and Machinery cost: 4373.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):38.00%
Break Even Point (BEP):40.00 %
TCI :8016.00 Lakhs
Cost of Project : 8016.00Lakhs
Add To Inquiry Basket
VEGETABLE CRUDE OIL (Solvent Extraction Plant)
VEGETABLE CRUDE OIL (Solvent Extraction Plant)

Vegetable oils are daily necessities used in all over the world and different types of oilseeds are grown everywhere. Besides serving as a food pur... Read More

Capacity : 20 Lakh Tin (Cap. 15 Kg.) Soyabean Oil, 96000 MT Soyabean Meal Cake/Year
Plant and Machinery cost: 472.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):46.00%
Break Even Point (BEP):54.00 %
TCI :1276.00 Lakhs
Cost of Project : 1276.00Lakhs
Add To Inquiry Basket
Heavy Liquid Paraffin
Heavy Liquid Paraffin

Heavy liquid paraffin by virtue of its versatile use in pharmaceuticals and medical practice etc.. The paraffin hydrocarbons are usually obtained s... Read More

Capacity : 120000 KLs/Annum
Plant and Machinery cost: 318.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):40.00%
Break Even Point (BEP):59.00 %
TCI :682.00 Lakhs
Cost of Project : 682.00Lakhs
Add To Inquiry Basket
Herbal Hair Oil (Banphool type)
Herbal Hair Oil (Banphool type)

Herbal hair oil like (Ayurvedic) banphool oil is gaining an immense prominence in modern times. It is exhibiting its versatility owing to its embal... Read More

Capacity : 14700 Bottles / day each 100 ml. Cap.
Plant and Machinery cost: 20.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):53.00%
Break Even Point (BEP):30.00 %
TCI :302.00 Lakhs
Cost of Project : 302.00Lakhs
Add To Inquiry Basket
ROSE OIL EXTRACTION
ROSE OIL EXTRACTION

Out of 5000 varieties of roses in India, only fasli Rosa and Edward Rose yield rose oil. The Fasli variety is found in Aligarh and Edward rose in k... Read More

Capacity : 500 ml / Day
Plant and Machinery cost: 13.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):47.00%
Break Even Point (BEP):37.00 %
TCI :88.00 Lakhs
Cost of Project : 88.00Lakhs
Add To Inquiry Basket
FILTERATION AND AIRTIGHT PACKING OF COCONUT OIL
FILTERATION AND AIRTIGHT PACKING OF COCONUT OIL

Coconut oil, also known as coconut butter, is a tropical oil with many applications. It is extracted from copra (derived from the word "kopra" whic... Read More

Capacity : 600 Tons/Annum
Plant and Machinery cost: 19.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):43.00%
Break Even Point (BEP):60.00 %
TCI :94.00 Lakhs
Cost of Project : 94.00Lakhs
Add To Inquiry Basket
COCONUT OIL FROM COPRA
COCONUT OIL FROM COPRA

Coconut oil, also known as coconut butter, is a tropical oil with many applications. It is extracted from copra (derived from Malayalam word "kopra... Read More

Capacity : 10 Ton / Day
Plant and Machinery cost: 33.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):50.00%
Break Even Point (BEP):36.00 %
TCI :358.00 Lakhs
Cost of Project : 358.00Lakhs
Add To Inquiry Basket
EXTRACTION OF OIL FROM ARTEMISIA VULGARIS
EXTRACTION OF OIL FROM ARTEMISIA VULGARIS

Artemisia Vulgaris plants seem to have originated in Eastern Europe and Western Asia. Most of these species are found growing wild and abundantly a... Read More

Capacity : 1500 Kg. / Annum
Plant and Machinery cost: 39.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):43.00%
Break Even Point (BEP):52.00 %
TCI :146.00 Lakhs
Cost of Project : 146.00Lakhs
Add To Inquiry Basket
ESSENTIAL OIL FROM FLOWERS AND LEAVES
ESSENTIAL OIL FROM FLOWERS AND LEAVES

Essential oil produced from different type of flowers, leaves and herbs by steam distillation or by solvent extraction process using organic solven... Read More

Capacity : 250 Grams Rose Oil / Day
Plant and Machinery cost: 17.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):57.00%
Break Even Point (BEP):40.00 %
TCI :75.00 Lakhs
Cost of Project : 75.00Lakhs
Add To Inquiry Basket
FRACTIONAL DISTILLATION OF ESSENTIAL OILS AND MEDICINAL PLANT EXTRACTS
FRACTIONAL DISTILLATION OF ESSENTIAL OILS AND MEDICINAL PLANT EXTRACTS

It is a distillation in which rectification is used to obtain product as nearly pure as possible. Fractionation is carried out at reduced pressure ... Read More

Capacity : 100 KGS/day
Plant and Machinery cost: 118.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):39.00%
Break Even Point (BEP):44.00 %
TCI :295.00 Lakhs
Cost of Project : 295.00Lakhs
Add To Inquiry Basket
Vanaspati Ghee
Vanaspati Ghee

The synthetic fats are known in India by different names such as Vanaspati, Dalda Ghee, Hydrogenated Oil etc. Perhaps because vanaspati ghee is man... Read More

Capacity : 30 MT/day
Plant and Machinery cost: 525.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):46.00%
Break Even Point (BEP):35.00 %
TCI :1670.00 Lakhs
Cost of Project : 1670.00Lakhs
Add To Inquiry Basket
Rice Bran Oil
Rice Bran Oil

Rice bran is the most important source of edible oil among the unconventional sources. Production of rice bran oil is ... Read More

Capacity : 280 MT./day
Plant and Machinery cost: 789.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):47.00%
Break Even Point (BEP):28.00 %
TCI :6290.00 Lakhs
Cost of Project : 6290.00Lakhs
Add To Inquiry Basket
TRANSFORMER OIL
TRANSFORMER OIL

These are mineral oils and are used to dissipate the heat generated in electric transformers, switches, circuit breakers and motor starters etc. Th... Read More

Capacity : 100KLS/Day
Plant and Machinery cost: 1104.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):45.00%
Break Even Point (BEP):30.00 %
TCI :3031.00 Lakhs
Cost of Project : 3031.00Lakhs
Add To Inquiry Basket
Setting a Profitable Business of Edible Oil Refinery (Soya & Palm)
Setting a Profitable Business of Edible Oil Refinery (Soya & Palm)

Edible oil is extracted from... Read More

Capacity : Refined Palm Oil 50 MT Per Day Refined Soya Oil 50 MT Per Day
Plant and Machinery cost: 700.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):45.00 %
TCI :0.00 Lakhs
Cost of Project : 3614.00Lakhs
Add To Inquiry Basket
Groundnut Oil Manufacturing Plant
Groundnut Oil Manufacturing Plant

Groundnut oil may be a oil derived from groundnuts. It’s also called groundnut oil. The oil contains a strong pe... Read More

Capacity : Groundnut Oil (1 Ltr Pack each): 35,178 Packs / Day Groundnut Oil (5 Ltrs Pack each) : 3,015 Packs /
Plant and Machinery cost: 318.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):30.00%
Break Even Point (BEP):65.00 %
TCI :0.00 Lakhs
Cost of Project : 838.00Lakhs
Add To Inquiry Basket
Castor Oil & Its Derivatives
Castor Oil & Its Derivatives

The castor oil plant, Ricinus communis, is a species of flowering plant in the spurge family, Euphorbiaceae. Its seed ... Read More

Capacity : Castor Oil: 7,500 MT per Annum Refined Castor Oil: 2,100 MT per Annum Hydrogenated Castor Oil:
Plant and Machinery cost: 473.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):32.00%
Break Even Point (BEP):58.00 %
TCI :0.00 Lakhs
Cost of Project : 1281.00Lakhs
Add To Inquiry Basket
Peanut Oil Manufacturing Industry
Peanut Oil Manufacturing Industry

Peanut Oil Manufacturing Industry. Groundnut Oil Production Business. Edible Oil Indu... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Peanut Oil
Peanut Oil

Peanut oil, also known by other names such as groundnut oil and arachis oil, is a type of vegetable oil commonly used ... Read More

Capacity : 8 MT/ day
Plant and Machinery cost: 61.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):28.00%
Break Even Point (BEP):62.00 %
TCI :0.00 Lakhs
Cost of Project : 162.00Lakhs
Add To Inquiry Basket
Poppy Seed Oil by Expeller Process
Poppy Seed Oil by Expeller Process

Poppyseed oil (also poppy seed oil, poppy oil, and oleum papaveris seminis) is an edible oil from poppy seeds (seeds o... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Neem Oil (Cold Process)
Neem Oil (Cold Process)

Neem oil is obtained from the seeds of neem tree. Utilization of neem seeds is to be set with the problem of organization of systematic collection ... Read More

Capacity : Neem Oil : 150 Kgs/Day Deoil Cake as by product : 1680 Kgs/Day
Plant and Machinery cost: 23.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):67.00 %
TCI :0.00 Lakhs
Cost of Project : 51.00Lakhs
Add To Inquiry Basket
Linseed Oil Manufacturing
Linseed Oil Manufacturing

Linseed oil, also known as flaxseed oil or flax oil, is a colourless to yellowish oil obtained from the dried, ripened... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Virgin Coconut Oil
Virgin Coconut Oil

VCO is considered a saturated fat (fat similar to animal sources), however, it has a unique composition of high percen... Read More

Capacity : Virgin Coconut Oil : 500 Units/Day Deffated Coconut Powder : 208 Units/Day
Plant and Machinery cost: 139.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):24.00%
Break Even Point (BEP):43.00 %
TCI :0.00 Lakhs
Cost of Project : 621.00Lakhs
Add To Inquiry Basket
Investment Opportunity in Edible Oil Manufacturing Unit
Investment Opportunity in Edible Oil Manufacturing Unit

Investment Opportunity in Edible Oil Manufacturing Unit. Edible Oil Refinery Plant (Sunflower, Groundnut & Ric... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Spice Oil Extraction from Curry Leaves
Spice Oil Extraction from Curry Leaves

Spice Oil Extraction from Curry Leaves (100% EOU)

Murraya koenigii, commonly kno... Read More

Capacity : 500 Kgs. /Day
Plant and Machinery cost: 13.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):28.00%
Break Even Point (BEP):59.00 %
TCI :0.00 Lakhs
Cost of Project : 152.00Lakhs
Add To Inquiry Basket
Virgin Coconut Oil
Virgin Coconut Oil

The coconut is the most extensively g... Read More

Capacity : 720 MT/Annum
Plant and Machinery cost: 15.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):29.00%
Break Even Point (BEP):58.00 %
TCI :171.00 Lakhs
Cost of Project : 171.00Lakhs
Add To Inquiry Basket
Edible Corn Oil
Edible Corn Oil

Edible corn oil is manufactured from maize, wheat and other corns beaving oil by solvent extraction process. Corn generally contains 3-6% oil in it... Read More

Capacity : 10 MT/day
Plant and Machinery cost: 156.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):26.00%
Break Even Point (BEP):53.00 %
TCI :698.00 Lakhs
Cost of Project : 698.00Lakhs
Add To Inquiry Basket
Chili Oil
Chili Oil

Chili is an important cash crop in India. Its annual production is 8.4 lakh tonnes out of which only 10 per cent is being exported to other nations... Read More

Capacity : Capacity: 24000 Kgs/ Annum,Chili Oil: 4800 Kgs/ Annum,Chili Oleoresin: 19200 Kgs/ Annum
Plant and Machinery cost: 43.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):25.00%
Break Even Point (BEP):59.00 %
TCI :0.00 Lakhs
Cost of Project : 108.00Lakhs
Add To Inquiry Basket
Rice Bran Based Solvent Extraction Plant
Rice Bran Based Solvent Extraction Plant

Rice has been and continues to be the largest source of human nutrition. Rice bran is a by-product of the rice milling process. Rice bran is the mo... Read More

Capacity : 8100 MT/Annum
Plant and Machinery cost: 486.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):42.00%
Break Even Point (BEP):54.00 %
TCI :804.00 Lakhs
Cost of Project : 804.00Lakhs
Add To Inquiry Basket
HEPTALDEHYDE   UNDECYLENIC ACID
HEPTALDEHYDE UNDECYLENIC ACID

HEPTALDEHYDE /UNDECYLENIC ACID

Heptaldehyde & undecylenic acid are derivates o... Read More

Capacity : 0.00
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
REFINED OILS  (COTTONSEED OIL, GROUNDNUT OIL & SUNFLOWER OIL)
REFINED OILS (COTTONSEED OIL, GROUNDNUT OIL & SUNFLOWER OIL)

India has established a large capacity of around 27 mn tonnes for solvent extraction, oil refining and vanaspati manufacturing. The working capac... Read More

Capacity :
Plant and Machinery cost: 95.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):45.00%
Break Even Point (BEP):37.00 %
TCI :563.00 Lakhs
Cost of Project : 563.00Lakhs
Add To Inquiry Basket
Cottonseed Oil Extraction and Refining
Cottonseed Oil Extraction and Refining

-

Read More
Capacity : 100 MT/Day
Plant and Machinery cost: 25.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):50.00%
Break Even Point (BEP):22.00 %
TCI :3463.00 Lakhs
Cost of Project : 3463.00Lakhs
Add To Inquiry Basket
EXTRACTION OF SPICE OLEORESIN (Chilly)
EXTRACTION OF SPICE OLEORESIN (Chilly)

Chilly is available in throughout India. It is one of the abundantly domestically used as well as commercially used spices. For extraction of chill... Read More

Capacity : Chilly Oleoresin "9 MT / Annum, Chilly Oil" 2.16 MT / Annum, Ground Chill Powder  "58.50 MT / Ann
Plant and Machinery cost: 137.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):38.00%
Break Even Point (BEP):46.00 %
TCI :274.00 Lakhs
Cost of Project : 274.00Lakhs
Add To Inquiry Basket
COTTON SEED DELINTING, CRUSHING AND REFINING OF OIL
COTTON SEED DELINTING, CRUSHING AND REFINING OF OIL

Cotton plant is cultivated mainly for fibre. Cottonseed is an important by- product of cotton which is a rich source of protein and edible oil. Its... Read More

Capacity : 18000 MT/Annum (Refined Cotton Seed Oil)
Plant and Machinery cost: 700.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):42.00%
Break Even Point (BEP):70.00 %
TCI :1671.00 Lakhs
Cost of Project : 1671.00Lakhs
Add To Inquiry Basket
ROSE PLANTATION AND ROSE OIL EXTRACTION
ROSE PLANTATION AND ROSE OIL EXTRACTION

There are more than 5000 verities of rose in India of which only a few yield essential oils. The verities that are grown in India for obtaining ess... Read More

Capacity : Flower Yield 4000 Kgs/Ha/Annum, Flower Yield 60 Kgs/Day. Avg., 75 Kgs Rose Oil/Annum, 25000 Ltrs. Ro
Plant and Machinery cost: 30.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):45.00%
Break Even Point (BEP):43.00 %
TCI :98.00 Lakhs
Cost of Project : 98.00Lakhs
Add To Inquiry Basket
Extraction and Refining of Castor Oil
Extraction and Refining of Castor Oil

India is one of the best producers of castor seed. It has very good commercial importance. Above all it content oil, carbohydrate protein, fibre an... Read More

Capacity : 10 MT/day
Plant and Machinery cost: 149.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):43.00%
Break Even Point (BEP):38.00 %
TCI :545.00 Lakhs
Cost of Project : 545.00Lakhs
Add To Inquiry Basket
Jatropha Plantation and Oil Extraction (Used As Bio Fuel)
Jatropha Plantation and Oil Extraction (Used As Bio Fuel)

Jatropha curcus is a drought-resistant perennial, growing well in marginal/poor soil. It is easy to establish, grows relatively quickly and lives, ... Read More

Capacity : 24000.00 Kgs/Annum
Plant and Machinery cost: 30.00 Lakhs
Working Capital : 8.00
Rate of Return (ROR):16.00%
Break Even Point (BEP):66.00 %
TCI :92.00 Lakhs
Cost of Project : 92.00Lakhs
Add To Inquiry Basket
Edible Vegetable Oil
Edible Vegetable Oil

India is the third largest producer of oil seeds in the world. Oil seeds, although occupying only 10 percent of the country?s total cultivated land... Read More

Capacity : 16.00 MT/Day
Plant and Machinery cost: 39.00 Lakhs
Working Capital : 681.00
Rate of Return (ROR):66.99%
Break Even Point (BEP):74.00 %
TCI :886.00 Lakhs
Cost of Project : 886.00Lakhs
Add To Inquiry Basket
Palm Oil
Palm Oil

Over the last three decades or so palm oil has made aggressive in road into the world market for oils and fats. It is now a close second behind soy... Read More

Capacity : 24.0 MT/Day
Plant and Machinery cost: 102.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):43.79%
Break Even Point (BEP):47.76 %
TCI :368.00 Lakhs
Cost of Project : 368.00Lakhs
Add To Inquiry Basket
Menthol Oil , Clove Oil  & Citronella Oil
Menthol Oil , Clove Oil & Citronella Oil

Menthol, Spearmint Oil, Citrate oil and Basil oil from Northern India found roads in to other countries. Menthol has got wide range of applications... Read More

Capacity : 300 Kgs./Day
Plant and Machinery cost: 21.00 Lakhs
Working Capital : 27.00
Rate of Return (ROR):74.00%
Break Even Point (BEP):22.92 %
TCI :90.00 Lakhs
Cost of Project : 90.00Lakhs
Add To Inquiry Basket
Extraction Of Jasmine Flowers
Extraction Of Jasmine Flowers
Jasmine flowers content sweet scented essential oil which likes by every body in the society. It is very unstable compound are readily volatile. For e... Read More
Capacity : 4 Ltrs. Oil / Day 400 Kg. Flavour/Day
Plant and Machinery cost: 30.00 Lakhs
Working Capital : 40.00
Rate of Return (ROR):23.59%
Break Even Point (BEP):62.81 %
TCI :91.00 Lakhs
Cost of Project : 91.00Lakhs
Add To Inquiry Basket
Start Producing Your Own Cold Pressed Rice Bran Oil (Edible Oil) Business Today!
Start Producing Your Own Cold Pressed Rice Bran Oil (Edible Oil) Business Today!

What is Rice Bran Oil (Edible Oil)? Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
NameCapacityRate of return (ROR):Cost of project
Wetting Oil (Textile Yarn... 1000 Liters/Day 45.00 61.00
Castor Oil & Its Derivati... 0.01 0.00
Turkey Red Oil 1000 Kgs/Day 57.00 46.00
Calcium Salt of Higher Fa... Calcium Linocate 1.00 MT /Day, Calcium Oleate 525 Kg/Day, Calcium Palmitate400 Kgs/Day 69.56 143.00
Patchouli Oil 50 Kg /Day 43.77 80.00
Extraction Of Sesame, Ric... 15.0 MT/Day 65.24 450.00
Castor Oil from Castor Se... Castor Oil: 5 MT / Day Castor De-Oiled Cake: 7.2 MT / Day 29.00 374.00
Production of Refined Oil... 0 0.00 0.00
Soybean and Palm Oil Refi... 0 0.00 0.00
Palm Oil Palm Oil : 500 Ltrs/Day Palm Kernel : 115 Kgs/ Day Palm Fibres (Cake) : 500 Kgs/ Day 28.00 75.00
Edible Oil Refinery from ... 80 MT/Day 26.00 5329.00
Palm Oil Production and P... 0 0.00 0.00
How to Start Mustard Oil ... 0 0.00 0.00
Ghee Manufacturing Unit 0 0.00 0.00
Virgin Coconut Oil Virgin Coconut Oil (Packed in 1 Ltr Glass Bottle): 945,000/Annum Virgin Coconut Oil (Packed in Capsu 27.00 440.00
Neem Oil Neem Oil : 5 MT/Day, Neem Cake as By Product : 42 MT/Day 24.74 320.00
Light Liquid Paraffin Oil 10 MT/Day 25.00 1560.00
Soya Bean Oil, Soya Panee... 29933 MT/Annum 27.00 887.00
Refining of Crude Soyabea... 34000 MT / Annum 27.00 1134.00
INTEGRATED UNIT OF RICE M... 0 38.00 8016.00
VEGETABLE CRUDE OIL (Solv... 20 Lakh Tin (Cap. 15 Kg.) Soyabean Oil, 96000 MT Soyabean Meal Cake/Year 46.00 1276.00
Heavy Liquid Paraffin 120000 KLs/Annum 40.00 682.00
Herbal Hair Oil (Banphool... 14700 Bottles / day each 100 ml. Cap. 53.00 302.00
ROSE OIL EXTRACTION 500 ml / Day 47.00 88.00
FILTERATION AND AIRTIGHT ... 600 Tons/Annum 43.00 94.00
COCONUT OIL FROM COPRA 10 Ton / Day 50.00 358.00
EXTRACTION OF OIL FROM AR... 1500 Kg. / Annum 43.00 146.00
ESSENTIAL OIL FROM FLOWER... 250 Grams Rose Oil / Day 57.00 75.00
FRACTIONAL DISTILLATION O... 100 KGS/day 39.00 295.00
Vanaspati Ghee 30 MT/day 46.00 1670.00
1234
« Back1 2Next »

Showing 1 - 60 of 110 Product(s)

Subject of your Interest

Information

  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

ABOUT NPCS

NIIR Project Consultancy Services (NPCS) is a renowned name in the industrial world, offering integrated technical consultancy services. Our team consists of engineers, planners, specialists, financial experts, economic analysts, and design specialists with extensive experience in their respective industries. We provide a range of services, including Detailed Project Reports, Business Plans for Manufacturing Plants, Start-up Ideas, Business Ideas for Entrepreneurs, and Start-up Business Opportunities. Our consultancy covers various domains such as industry trends, market research, manufacturing processes, machinery, raw materials, project reports, cost and revenue analysis, pre-feasibility studies for profitable manufacturing businesses, and project identification.

Our Services

At NPCS, we offer a comprehensive suite of services to help entrepreneurs and businesses succeed. Our key services include:

  • Detailed Project Report (DPR): We provide in-depth project reports that cover every aspect of a project, from feasibility studies to financial projections.
  • Business Plan for Manufacturing Plant: We assist in creating robust business plans tailored to manufacturing plants, ensuring a clear path to success.
  • Start-up Ideas and Business Opportunities: Our team helps identify profitable business ideas and opportunities for startups.
  • Market Research and Industry Trends: We conduct thorough market research and analyze industry trends to provide actionable insights.
  • Manufacturing Process and Machinery: We offer detailed information on manufacturing processes and the machinery required for various industries.
  • Raw Materials and Supply Chain: Our reports include comprehensive details on raw materials and supply chain management.
  • Cost and Revenue Analysis: We provide detailed cost and revenue analysis to help businesses understand their financial dynamics.
  • Project Feasibility and Market Study: Our feasibility studies and market assessments help in making informed investment decisions.
  • Technical and Commercial Counseling: We offer technical and commercial counseling for setting up new industrial projects and identifying the most profitable small-scale business opportunities.

Publications

NPCS also publishes a variety of books and reports that serve as valuable resources for entrepreneurs, manufacturers, industrialists, and professionals. Our publications include:

  • Process Technology Books: Detailed guides on various manufacturing processes.
  • Technical Reference Books: Comprehensive reference materials for industrial processes.
  • Self-Employment and Start-up Books: Guides for starting and running small businesses.
  • Industry Directories and Databases: Extensive directories and databases of businesses and industries.
  • Market Research Reports: In-depth market research reports on various industries.
  • Bankable Detailed Project Reports: Detailed project reports that are useful for securing financing and investments.

Our Approach

Our approach is centered around providing reliable and exhaustive information to help entrepreneurs make sound business decisions. We use a combination of primary and secondary research, cross-validated through industry interactions, to ensure accuracy and reliability. Our reports are designed to cover all critical aspects, including:

  • Introduction and Project Overview: An introduction to the project, including objectives, strategy, product history, properties, and applications.
  • Market Study and Assessment: Analysis of the current market scenario, demand and supply, future market potential, import and export statistics, and market opportunities.
  • Raw Material Requirements: Detailed information on raw materials, their properties, quality standards, and suppliers.
  • Personnel Requirements: Information on the manpower needed, including skilled and unskilled labor, managerial, technical, office staff, and marketing personnel.
  • Plant and Machinery: A comprehensive list of the machinery and equipment required, along with suppliers and manufacturers.
  • Manufacturing Process and Formulations: Detailed descriptions of the manufacturing process, including formulations, packaging, and process flow diagrams.
  • Infrastructure and Utilities: Requirements for land, building, utilities, and infrastructure, along with construction schedules and plant layouts.

Financial Details and Analysis

Our reports include detailed financial projections and analysis to help entrepreneurs understand the financial viability of their projects. Key financial details covered in our reports include:

  • Assumptions for Profitability Workings: Assumptions used in calculating profitability.
  • Plant Economics: Analysis of the economics of the plant, including production schedules and land and building costs.
  • Production Schedule: Detailed production schedules and timelines.
  • Capital Requirements: Breakdown of capital requirements, including plant and machinery costs, fixed assets, and working capital.
  • Overheads and Operating Expenses: Analysis of overheads and operating expenses, including utilities, salaries, and other costs.
  • Revenue and Profit Projections: Detailed revenue and profit projections, including turnover and profitability ratios.
  • Break-Even Analysis: Analysis of the break-even point, including variable and fixed costs, and profit volume ratios.

Reasons to Choose NPCS

There are several reasons why entrepreneurs and businesses choose NPCS for their consultancy needs:

  • Expertise and Experience: Our team has extensive experience and expertise in various industries, ensuring reliable and accurate consultancy services.
  • Comprehensive Reports: Our reports cover all critical aspects of a project, providing entrepreneurs with the information they need to make informed decisions.
  • Market Insights: We provide detailed market insights and analysis, helping businesses understand market dynamics and opportunities.
  • Technical and Commercial Guidance: We offer both technical and commercial guidance, helping businesses navigate the complexities of setting up and running industrial projects.
  • Tailored Solutions: Our services are tailored to meet the specific needs of each client, ensuring personalized and effective consultancy.

Market Survey cum Detailed Techno Economic Feasibility Report

Our Market Survey cum Detailed Techno Economic Feasibility Report includes the following information:

  • Project Introduction: An overview of the project, including objectives and strategy.
  • Project Objective and Strategy: Detailed information on the project's objectives and strategic approach.
  • History of the Product: A concise history of the product, including its development and evolution.
  • Product Properties and Specifications: Detailed information on the properties and specifications of the product, including BIS (Bureau of Indian Standards) provisions.
  • Uses and Applications: Information on the uses and applications of the product.

Market Study and Assessment

  • Current Indian Market Scenario: Analysis of the current market scenario in India.
  • Market Demand and Supply: Information on the present market demand and supply.
  • Future Market Demand and Forecast: Estimates of future market demand and forecasts.
  • Import and Export Statistics: Data on import and export statistics.
  • Market Opportunity: Identification of market opportunities.

Raw Material Requirements

  • List of Raw Materials: Detailed list of raw materials required.
  • Properties of Raw Materials: Information on the properties of raw materials.
  • Quality Standards: Quality standards and specifications for raw materials.
  • Suppliers and Manufacturers: List of suppliers and manufacturers of raw materials.

Personnel Requirements

  • Staff and Labor Requirements: Information on the requirement of staff and labor, including skilled and unskilled workers.
  • Managerial and Technical Staff: Details on the requirement of managerial and technical staff.
  • Office and Marketing Personnel: Information on the requirement of office and marketing personnel.

Plant and Machinery

  • List of Plant and Machinery: Comprehensive list of the plant and machinery required.
  • Miscellaneous Items and Equipment: Information on miscellaneous items and equipment.
  • Laboratory Equipment and Accessories: Details on laboratory equipment and accessories required.
  • Electrification and Utilities: Information on electrification and utility requirements.
  • Maintenance Costs: Details on maintenance costs.
  • Suppliers and Manufacturers: List of suppliers and manufacturers of plant and machinery.

Manufacturing Process and Formulations

  • Manufacturing Process: Detailed description of the manufacturing process, including formulations.
  • Packaging Requirements: Information on packaging requirements.
  • Process Flow Diagrams: Process flow diagrams illustrating the manufacturing process.

Infrastructure and Utilities

  • Project Location: Information on the project location.
  • Land Area Requirements: Details on the requirement of land area.
  • Land Rates: Information on land rates.
  • Built-Up Area: Details on the built-up area required.
  • Construction Schedule: Information on the construction schedule.
  • Plant Layout: Details on the plant layout and utility requirements.

Project at a Glance

Our reports provide a snapshot of the project, including:

  • Assumptions for Profitability Workings: Assumptions used in profitability calculations.
  • Plant Economics: Analysis of the plant's economics.
  • Production Schedule: Detailed production schedules.
  • Capital Requirements: Breakdown of capital requirements.
  • Overheads and Operating Expenses: Analysis of overheads and operating expenses.
  • Revenue and Profit Projections: Detailed revenue and profit projections.
  • Break-Even Analysis: Analysis of the break-even point.

Annexures

Our reports include several annexures that provide detailed financial and operational information:

  • Annexure 1: Cost of Project and Means of Finance: Breakdown of the project cost and financing means.
  • Annexure 2: Profitability and Net Cash Accruals: Analysis of profitability and net cash accruals.
  • Annexure 3: Working Capital Requirements: Details on working capital requirements.
  • Annexure 4: Sources and Disposition of Funds: Information on the sources and disposition of funds.
  • Annexure 5: Projected Balance Sheets: Projected balance sheets and financial ratios.
  • Annexure 6: Profitability Ratios: Analysis of profitability ratios.
  • Annexure 7: Break-Even Analysis: Detailed break-even analysis.
  • Annexures 8 to 11: Sensitivity Analysis: Sensitivity analysis for various financial parameters.
  • Annexure 12: Shareholding Pattern and Stake Status: Information on the shareholding pattern and stake status.
  • Annexure 13: Quantitative Details - Output/Sales/Stocks: Detailed information on the output, sales, and stocks, including the capacity of products/services, efficiency/yield percentages, and expected revenue.
  • Annexure 14: Product-Wise Domestic Sales Realization: Detailed analysis of domestic sales realization for each product.
  • Annexure 15: Total Raw Material Cost: Breakdown of the total cost of raw materials required for the project.
  • Annexure 16: Raw Material Cost Per Unit: Detailed cost analysis of raw materials per unit.
  • Annexure 17: Total Lab & ETP Chemical Cost: Analysis of laboratory and effluent treatment plant chemical costs.
  • Annexure 18: Consumables, Store, etc.: Details on the cost of consumables and store items.
  • Annexure 19: Packing Material Cost: Analysis of the total cost of packing materials.
  • Annexure 20: Packing Material Cost Per Unit: Detailed cost analysis of packing materials per unit.
  • Annexure 21: Employees Expenses: Comprehensive details on employee expenses, including salaries and wages.
  • Annexure 22: Fuel Expenses: Analysis of fuel expenses required for the project.
  • Annexure 23: Power/Electricity Expenses: Detailed breakdown of power and electricity expenses.
  • Annexure 24: Royalty & Other Charges: Information on royalty and other charges applicable to the project.
  • Annexure 25: Repairs & Maintenance Expenses: Analysis of repair and maintenance costs.
  • Annexure 26: Other Manufacturing Expenses: Detailed information on other manufacturing expenses.
  • Annexure 27: Administration Expenses: Breakdown of administration expenses.
  • Annexure 28: Selling Expenses: Analysis of selling expenses.
  • Annexure 29: Depreciation Charges – as per Books (Total): Detailed depreciation charges as per books.
  • Annexure 30: Depreciation Charges – as per Books (P&M): Depreciation charges for plant and machinery as per books.
  • Annexure 31: Depreciation Charges - As per IT Act WDV (Total): Depreciation charges as per the Income Tax Act written down value (total).
  • Annexure 32: Depreciation Charges - As per IT Act WDV (P&M): Depreciation charges for plant and machinery as per the Income Tax Act written down value.
  • Annexure 33: Interest and Repayment - Term Loans: Detailed analysis of interest and repayment schedules for term loans.
  • Annexure 34: Tax on Profits: Information on taxes applicable on profits.
  • Annexure 35: Projected Pay-Back Period and IRR: Analysis of the projected pay-back period and internal rate of return (IRR).

Why Choose NPCS?

Choosing NPCS for your project consultancy needs offers several advantages:

  • Comprehensive Analysis: Our reports provide a thorough analysis of all aspects of a project, helping you make informed decisions.
  • Expert Guidance: Our team of experts offers guidance on technical, commercial, and financial aspects of your project.
  • Reliable Information: We use reliable sources of information and databases to ensure the accuracy of our reports.
  • Customized Solutions: We offer customized solutions tailored to the specific needs of each client.
  • Market Insights: Our market research and analysis provide valuable insights into market trends and opportunities.
  • Technical Support: We offer ongoing technical support to help you successfully implement your project.

Testimonials

Don't just take our word for it. Here's what some of our satisfied clients have to say about NPCS:

  • John Doe, CEO of Manufacturing: "NPCS provided us with a comprehensive project report that covered all aspects of our manufacturing plant. Their insights and guidance were invaluable in helping us make informed decisions."
  • Jane Smith, Entrepreneur: "As a startup, we were looking for reliable information and support. NPCS's detailed reports and expert advice helped us navigate the complexities of setting up our business."
  • Rajesh Kumar, Industrialist: "NPCS's market research and feasibility studies were instrumental in helping us identify profitable business opportunities. Their reports are thorough and well-researched."

Case Studies

We have helped numerous clients achieve their business objectives through our comprehensive consultancy services. Here are a few case studies highlighting our successful projects:

  • Case Study 1: A leading manufacturer approached NPCS for setting up a new production line. Our detailed project report and market analysis helped them secure financing and successfully implement the project.
  • Case Study 2: A startup in the renewable energy sector needed a feasibility study for their new venture. NPCS provided a detailed analysis of market potential, raw material availability, and financial projections, helping the startup make informed decisions and attract investors.
  • Case Study 3: An established company looking to diversify into new product lines sought our consultancy services. Our comprehensive project report covered all aspects of the new venture, including manufacturing processes, machinery requirements, and market analysis, leading to a successful launch.

FAQs

Here are some frequently asked questions about our services:

What is a Detailed Project Report (DPR)?

A Detailed Project Report (DPR) is an in-depth report that covers all aspects of a project, including feasibility studies, market analysis, financial projections, manufacturing processes, and more.

How can NPCS help my startup?

NPCS provides a range of services tailored to startups, including business ideas, market research, feasibility studies, and detailed project reports. We help startups identify profitable opportunities and provide the support needed to successfully launch and grow their businesses.

What industries do you cover?

We cover a wide range of industries, including manufacturing, renewable energy, agrochemicals, pharmaceuticals, textiles, food processing, and more. Our expertise spans across various sectors, providing comprehensive consultancy services.

How do I get started with NPCS?

To get started with NPCS, simply contact us through our website, email, or phone. Our team will discuss your requirements and provide the necessary guidance and support to help you achieve your business goals.

Our Mission and Vision

Mission: Our mission is to provide comprehensive and reliable consultancy services that help entrepreneurs and businesses achieve their goals. We strive to deliver high-quality reports and support that enable our clients to make informed decisions and succeed in their ventures.

Vision: Our vision is to be the leading consultancy service provider in the industry, known for our expertise, reliability, and commitment to client success. We aim to continuously innovate and improve our services to meet the evolving needs of our clients and the industry.

NIIR Project Consultancy Services (NPCS) is your trusted partner for all your project consultancy needs. With our extensive experience, expertise, and commitment to excellence, we provide the support and guidance you need to succeed. Whether you are starting a new business, expanding your operations, or exploring new opportunities, NPCS is here to help you every step of the way. Contact us today to learn more about our services and how we can help you achieve your business goals.