Tripura is a state in Northeast India. The third-smallest state in the country, it covers 10,491 km2 (4,051 sq mi) and is bordered by Bangladesh (East Bengal) to the north, south, and west, and the Indian states of Assam and Mizoram to the east. Tripura is a landlocked state in North East India. The state has a tropical savanna climate, designated Aw under the Köppen climate classification. The undulating topography leads to local variations, particularly in the hill ranges. The four main seasons are winter, from December to February; pre-monsoon or summer, from March to April; monsoon, from May to September; and post-monsoon, from October to November.

Tripura's gross state domestic product for 2010–11 was 129.47 billion (US$2.1 billion) at constant price (2004–05), recording 5.71 per cent growth over the previous year. In the same period, the GDP of India was 48778.42 billion (US$790 billion), with a growth rate of 8.55 per cent. Tripura is an agrarian state with more than half of the population dependent on agriculture and allied activities. However, due to hilly terrain and forest cover, only 27 per cent of the land is available for cultivation. Rice, the major crop of the state, is cultivated in 91 per cent of the cropped area.

TOURISM

Tripura has a geographical area of about 10,492 sq. km. almost two-thirds of the state is under hilly terrain and it is surrounded on three sides by the deltaic basin of Bangladesh. The Tripura tribal’s are divided into two groups: Puran Tripuras and Natun Tripuras. The Puran Tripuras are the original inhabitants of the State and constitute a little over 16% of the total and 57% of the tribal population of the State. The Department of Tourism, Govt. of India, under the ministry of Tourism and Culture has been providing liberal financial and technical support for the tourism development in the state based on the projects received from the states. It is quite clear that Tripura has tremendous and quite unique tourism potential. This could be tapped mainly through the concept of Eco-tourism and Heritage tourism. Nature / wildlife tourism, adventure tourism, rural tourism, leisure tourism, pilgrimage tourism, international border tourism could be some special tourist packages. The Tourism Development in the Northeast region will depend on integrated approach, involving various government departments, private entrepreneurs, voluntary organizations and local community. This approach will also help in evolving local people’s perception towards tourism development as a strong tool for socio-economic up liftment.

INDUSTRIAL SECTOR

The State Government offers a package of incentives for setting up of industrial units, which is comparable to other states. Besides, the special incentive package i.e. North East Industrial and Investment Promotion Policy (NEIIP) declared by the Government of India for the North East Region is available to industrial units.

State Package of Incentives under Tripura Industrial Investment Promotion Incentive Scheme-

•                    Capital Investment Subsidy @ 30% and additional subsidy @ 2.5% for enterprises of ST, SC, & women individuals on Fixed Capital Investment.

•                    Full Reimbursement of Standard Certification Fees /Charges / other expenses on account of obtaining a standard Certification.

•                    Provides State Transport Subsidy for covering the portion for which Central Transport Subsidy is not available

•                    85% Exemption from the payment of Earnest Money and Security Deposits on tenders floated by State Govt. Department / Agencies.

Incentives declared by Central Government:

•                    Exemption of Excise Duty on finished products.

•                    Central Transport Subsidy.

•                    Income Tax Benefit.

•                    Capital Investment Subsidy.

•                    Comprehensive Insurance Scheme for insurance coverage. Subsidies to service sector, bio-technology and power generating industries.

INVESTMENT OPPORTUNITIES

Tripura offers an investor-friendly environment. The Government welcomes investments into the State, from both domestic and foreign investors.

•        Natural gas

Tripura has vast reserves of natural gas in non-associate form. The gas is of high quality, with high methane content of up to 97%. The availability of superior quality natural gas, at concessional price, offers a great opportunity to prospective investors, to set up gas-based industrial units, using natural gas

•        Information Technology (IT)

Tripura has been considered the second best IT destination in the North East. IT sector (including IT-enabled services) has been identified as one of the major potential growth sectors by the state. The high literacy rate of the State provides additional advantage for development of the sector.

•        Food Processing

The State government has identified food processing as a major thrust area. There is a vast potential for setting up of food processing units in the State. The agro-climatic conditions in Tripura are ideally suited for production of a large variety of horticultural crops.

•        Handicrafts

From time immemorial, Tripura has carved out a name for itself in the field of handicrafts. The gifted artisans produce wonderful objects of crafts from simple material like cane, bamboo and wood.

•        Tourism

Tripura is an attractive tourist destination. The state has a rich cultural heritage. There are number of historical Hindu and Buddhist sites.


INDUSTRIAL POLICY

•        To improve Basic as well Industrial Infrastructure.

•        Industrial Growth by attracting Private Investment.

•        To improve investment climate towards better regulation by removing barriers to competition.

•        Creation of hassle-free and congenial investment climate.

•        To bring significant increase in the State Domestic Product.

•        Widening of resources base of the state.

•        Development of connectivity (Internal road, railways and air & telecom).

•        Better social infrastructure Enabling Entrepreneurship -building capacities through entrepreneurial and technical skills, training and promotion of self-employment.

THRUST AREAS

•        Natural Gas

•        Food Processing

•        Rubber

•        Tea

•        Handicraft

•        Bamboo

•        Handloom

•        Tourism

•        Information Technology

•        Education

  •           Healthcare

The Department of Industries & Commerce was established to promote Village and Small-scale industries as well as medium and large scale industries in the State. While efforts are being made to promote entrepreneurship within the State, the outside investors in the public and private sectors are also encouraged both for their financial capabilities and technical expertise, for the medium and large-scale units. The major existing industrial area is the Industrial Growth Centre Complex at Bodhjungnagar which also includes Food Park, Rubber Park and Export Promotion Industrial Park. The other industrial sites near Agartala as the main business and industrial centres are Dukli, Arundhatinagar and Badharghat. The mineral resources are minor amounts of glass sands, limestone, plastic clay and hard rock and all of these materials are being used in varying degrees. Setting up of ceramic tiles unit and other mineral based industries are being encouraged in the private sector.


We can provide you detailed project reports on the following topics. Please select the projects of your interests.
Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the ost of raw material, formulating the cash flow statement, projecting the balance sheet etc.
We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics. Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.


We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Add multiple items to inquiry

Select the items and then press Add to inquiry button

Sort by :
Set up a Medical College  with Hospital
Set up a Medical College with Hospital

 

A me... Read More

Capacity : Student Admission Fee1.39 Units per day Student (Indian) Tution College Fee 1.17 Units per day Stud
Plant and Machinery cost: 1804.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):16.00%
Break Even Point (BEP):46.00 %
TCI :0.00 Lakhs
Cost of Project : 12227.00Lakhs
Add To Inquiry Basket
Setup Your Own Production Business of Disposable Plastic Syringes Fastest Growing Industry of Medical Disposables
Setup Your Own Production Business of Disposable Plastic Syringes Fastest Growing Industry of Medical Disposables

 

A Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Production Industry of Calcium Carbide (CaC2)
Production Industry of Calcium Carbide (CaC2)

 

Calcium carbide, ... Read More

Capacity : Calcium Carbide 60 MT Per Day
Plant and Machinery cost: 2127.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):28.00%
Break Even Point (BEP):68.00 %
TCI :0.00 Lakhs
Cost of Project : 3810.00Lakhs
Add To Inquiry Basket
Opportunities in Manufacturing of Solar Inverter (100 KVA – 1000 KVA)
Opportunities in Manufacturing of Solar Inverter (100 KVA – 1000 KVA)

 

A solar inverter,... Read More

Capacity : Solar Inverter 50 Hz 100 to 1000 KVA 15 NosPer Day
Plant and Machinery cost: 373.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):26.00%
Break Even Point (BEP):47.00 %
TCI :0.00 Lakhs
Cost of Project : 1288.00Lakhs
Add To Inquiry Basket
Opportunities in Drinking Water  with Packaging in Aluminium Beverage Cans (Mineral, Carbonated, Alkaline)
Opportunities in Drinking Water with Packaging in Aluminium Beverage Cans (Mineral, Carbonated, Alkaline)

 

It goes without s... Read More

Capacity : Mineral Water 2,000 Cans Per Day Carbonated Water 2,000 Cans Per Day Alkaline Water 2,000 Cans Per
Plant and Machinery cost: 186.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):22.00%
Break Even Point (BEP):61.00 %
TCI :0.00 Lakhs
Cost of Project : 417.00Lakhs
Add To Inquiry Basket
Production Business of  Ethanol from Maize
Production Business of Ethanol from Maize

 

Ethanol is widely... Read More

Capacity : Ethanol 60 KLtrs per day
Plant and Machinery cost: 49.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):24.00%
Break Even Point (BEP):48.00 %
TCI :0.00 Lakhs
Cost of Project : 80.00Lakhs
Add To Inquiry Basket
Lucrative Production Business of Calcium Carbide (Calcium Acetylide) Profitable Industry of Chemical Sector
Lucrative Production Business of Calcium Carbide (Calcium Acetylide) Profitable Industry of Chemical Sector

 

Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Demanding Business of E-Rickshaw Assembling
Demanding Business of E-Rickshaw Assembling

E Rickshaws are three wheel ... Read More

Capacity : 200 Nos per day
Plant and Machinery cost: 206.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):30.00%
Break Even Point (BEP):68.00 %
TCI :0.00 Lakhs
Cost of Project : 2580.00Lakhs
Add To Inquiry Basket
Setting a Profitable Business of Edible Oil Refinery (Soya & Palm)
Setting a Profitable Business of Edible Oil Refinery (Soya & Palm)

Edible oil is extracted from... Read More

Capacity : Refined Palm Oil 50 MT Per Day Refined Soya Oil 50 MT Per Day
Plant and Machinery cost: 700.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):45.00 %
TCI :0.00 Lakhs
Cost of Project : 3614.00Lakhs
Add To Inquiry Basket
Start your own Manufacturing Industry of Men’s Undergarments (EOU)
Start your own Manufacturing Industry of Men’s Undergarments (EOU)

Men’s underwear, also... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Production of Sodium Hydrosulphite
Production of Sodium Hydrosulphite

Sodium hydrosulfite, also known as sodium dithionite or sodium hydrosulfide, is a che... Read More

Capacity : 60 MT per Day
Plant and Machinery cost: 280.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):29.00%
Break Even Point (BEP):58.00 %
TCI :0.00 Lakhs
Cost of Project : 934.00Lakhs
Add To Inquiry Basket
Detailed Project Report on E-Waste Recycling Plant
Detailed Project Report on E-Waste Recycling Plant

Electronic wastes, "e-waste... Read More

Capacity : Plastic: 1.60 MT per day Ferrous Material: 1.00 MT per day, Aluminium: 0.70 MT per day, Glass: 1.00
Plant and Machinery cost: 86.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):60.00 %
TCI :0.00 Lakhs
Cost of Project : 314.00Lakhs
Add To Inquiry Basket
Aluminium Cans for Beverages Manufacturing Plant
Aluminium Cans for Beverages Manufacturing Plant

The aluminium beverage can is now the popular choice for carbonated and still soft dr... Read More

Capacity : Aluminium Cans for Beverage Size 355 ml 83,333 Pcs. per day, Aluminium Cans for Beverage Size 473 ml
Plant and Machinery cost: 3933.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 5655.00Lakhs
Add To Inquiry Basket
Micronutrient Fortified Energy Dense Food Manufacturing Business
Micronutrient Fortified Energy Dense Food Manufacturing Business

Even though most people think about protein as the nutrient that makes us feel full a... Read More

Capacity : Micronutients Fortified Energy Dense Food (Rice) 1,600 Kgs per Day
Plant and Machinery cost: 23.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):66.00 %
TCI :0.00 Lakhs
Cost of Project : 56.00Lakhs
Add To Inquiry Basket
Production of Polyester Textured Yarn from Used Pet Bottle
Production of Polyester Textured Yarn from Used Pet Bottle

Polyester Texturised Yarn are sometimes referred to as polyester filament, polyester ... Read More

Capacity : 50 MT Per Day
Plant and Machinery cost: 1908.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):28.00%
Break Even Point (BEP):54.00 %
TCI :0.00 Lakhs
Cost of Project : 3844.00Lakhs
Add To Inquiry Basket
Start Printed Circuit Board PCBs Manufacturing Business
Start Printed Circuit Board PCBs Manufacturing Business

Modern electronic products,... Read More

Capacity : Multilayer High Density Interconnect PCBs 40 SqMtrs. Per Day Multilayer Flex PCBs 40 SqMtrs. Per D
Plant and Machinery cost: 260.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):58.00 %
TCI :0.00 Lakhs
Cost of Project : 594.00Lakhs
Add To Inquiry Basket
Micronutrient Fortified Energy Dense Food Production Business
Micronutrient Fortified Energy Dense Food Production Business

Micronutrient Fortified Ene... Read More

Capacity : 1600 Kgs Per Day
Plant and Machinery cost: 23.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):28.00%
Break Even Point (BEP):65.00 %
TCI :0.00 Lakhs
Cost of Project : 56.00Lakhs
Add To Inquiry Basket
Profitable Business of Cocoa Processing Unit Cocoa Butter, Cocoa Couverture and Cocoa Powder  Further Processed Products Spreads and Chocolate Syrups
Profitable Business of Cocoa Processing Unit Cocoa Butter, Cocoa Couverture and Cocoa Powder Further Processed Products Spreads and Chocolate Syrups

Cocoa processing is the pro... Read More

Capacity : Cocoa Liquor 2,000 Kgs Per Day Cocoa Butter 974.4 Kgs Per Day Cocoa Powder 512.8 Kgs Per Day Ch
Plant and Machinery cost: 1582.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):26.00%
Break Even Point (BEP):39.00 %
TCI :0.00 Lakhs
Cost of Project : 2422.00Lakhs
Add To Inquiry Basket
Production of Tiles Adhesive (Polymer Modified Cementatious)
Production of Tiles Adhesive (Polymer Modified Cementatious)

The tiles adhesive is a sti... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Production of Bio Organic Fertilizer from Tea Waste Profitable Project Opportunities in Organic Fertilizers Sector
Production of Bio Organic Fertilizer from Tea Waste Profitable Project Opportunities in Organic Fertilizers Sector

 

Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
A Complete Business Plan for Lithium Ion Battery (Battery Assembly)
A Complete Business Plan for Lithium Ion Battery (Battery Assembly)

Lithium ion batteries are t... Read More

Capacity : 150 Nos per day
Plant and Machinery cost: 155.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):63.00 %
TCI :0.00 Lakhs
Cost of Project : 708.00Lakhs
Add To Inquiry Basket
Manufacturing Ideas & Investment Opportunities in the Business of Disposable Plates and Cups from Waste Rice Husk Powder
Manufacturing Ideas & Investment Opportunities in the Business of Disposable Plates and Cups from Waste Rice Husk Powder

Low-grade material is used to make a lot of disposable paper and plastic plates. They... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Opportunities in Production of Ayurvedic Pain Balm Herbal Pain Relief Balm Making Business
Opportunities in Production of Ayurvedic Pain Balm Herbal Pain Relief Balm Making Business

Ayurveda is a system of alt... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Setup a Lucrative Business of Solar Panel Renewable Energy is the Fastest-Growing Industry in the World
Setup a Lucrative Business of Solar Panel Renewable Energy is the Fastest-Growing Industry in the World

 

A solar panel is ... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Oxygen Gas Plant
Oxygen Gas Plant

Oxygen as a raw material for synthesizing chemical compounds is in daily life. ... Read More

Capacity : 172 Cylinders Per Day (each Cylinder 7M3)
Plant and Machinery cost: 178.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):39.00%
Break Even Point (BEP):50.00 %
TCI :0.00 Lakhs
Cost of Project : 582.00Lakhs
Add To Inquiry Basket
Business of Medical Disposables Gowns and Drapes
Business of Medical Disposables Gowns and Drapes

 

Surgical gowns mu... Read More

Capacity : Medical Gowns: 1,250 Pcs per Day Medical Drapes: 1,250 Pcs per Day
Plant and Machinery cost: 209.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):30.54%
Break Even Point (BEP):55.16 %
TCI :0.00 Lakhs
Cost of Project : 529.00Lakhs
Add To Inquiry Basket
Manufacturing Business of Disposable Plate and Cups from Waste Rice Husk Powder
Manufacturing Business of Disposable Plate and Cups from Waste Rice Husk Powder

 

Disposable plate ... Read More

Capacity : Disposable Plates from Waste Rice Husk Powder: 10,000 Pcs per Day Disposable Cups from Waste Rice Hu
Plant and Machinery cost: 38.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):28.44%
Break Even Point (BEP):59.78 %
TCI :0.00 Lakhs
Cost of Project : 166.00Lakhs
Add To Inquiry Basket
Start Business of Surgical Hand Gloves
Start Business of Surgical Hand Gloves

 

A surgical (surge... Read More

Capacity : 40,000 Pairs per day
Plant and Machinery cost: 239.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):29.41%
Break Even Point (BEP):45.36 %
TCI :0.00 Lakhs
Cost of Project : 816.00Lakhs
Add To Inquiry Basket
Business of Oxygen Gas Plant (Industrial and Pharmaceutical Grade)
Business of Oxygen Gas Plant (Industrial and Pharmaceutical Grade)

 

Oxygen (CO2<... Read More

Capacity : Oxygen Gas (Medical Grade) Purity 99.5-99.9%: 500 Cylinders per Day Oxygen Gas (Indudrial Grade) Pur
Plant and Machinery cost: 418.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):57.69%
Break Even Point (BEP):26.80 %
TCI :0.00 Lakhs
Cost of Project : 748.00Lakhs
Add To Inquiry Basket
Start Investing in Most Growing Business of Medical Disposable Start Manufacturing Unit of Medical Disposables Gowns and Drapes
Start Investing in Most Growing Business of Medical Disposable Start Manufacturing Unit of Medical Disposables Gowns and Drapes


Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):1.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Start Production of Surgical Hand Gloves Rising Demand of Surgical Hand Gloves in Covid19 Pandemic
Start Production of Surgical Hand Gloves Rising Demand of Surgical Hand Gloves in Covid19 Pandemic

Medical gloves assist minim... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Opportunities in Business of Adhesive Fevicol Type
Opportunities in Business of Adhesive Fevicol Type

 

Adhesive, also kno... Read More

Capacity : Adhesive (Fevicol Type) 10.0 MT per Day
Plant and Machinery cost: 17.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):26.70%
Break Even Point (BEP):65.62 %
TCI :0.00 Lakhs
Cost of Project : 161.00Lakhs
Add To Inquiry Basket
Start Manufacturing of Menthol Crystal
Start Manufacturing of Menthol Crystal

Menthol is a white crystalli... Read More

Capacity : Menthol Crystal 1,000.0 Kgs per day Dmentha Oil 333.3 Kgs per day
Plant and Machinery cost: 196.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):28.87%
Break Even Point (BEP):52.17 %
TCI :0.00 Lakhs
Cost of Project : 643.00Lakhs
Add To Inquiry Basket
Paprika Oleoresin
Paprika Oleoresin

 

Paprika oleoresin... Read More

Capacity : Paprika Oleoresin 160.0 Kgs Per Day Paprika Spent 1,093.3 Kgs Per Day
Plant and Machinery cost: 395.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):29.32%
Break Even Point (BEP):57.23 %
TCI :0.00 Lakhs
Cost of Project : 1700.00Lakhs
Add To Inquiry Basket
Investment Opportunities in Business of PET Recycling &  Production of Flakes
Investment Opportunities in Business of PET Recycling & Production of Flakes

 

Municipal solid wa... Read More

Capacity : Recycled PET Flakes 64.0 MT per day
Plant and Machinery cost: 174.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):30.45%
Break Even Point (BEP):71.77 %
TCI :0.00 Lakhs
Cost of Project : 440.00Lakhs
Add To Inquiry Basket
Emerging Business of  Xanthan Gum Food and Oil Drilling Grade
Emerging Business of Xanthan Gum Food and Oil Drilling Grade

 

Xanthan gum is a p... Read More

Capacity : Xanthan Gum Food Grade 720.0 Kg. Per Day Xanthan Gum Oil Drilling Grade 340.0 Kg. Per Day
Plant and Machinery cost: 120.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):25.27%
Break Even Point (BEP):61.77 %
TCI :0.00 Lakhs
Cost of Project : 555.00Lakhs
Add To Inquiry Basket
Profitable Business of Industrial and Pharmaceutical Gases Start Oxygen Gas Plant Industrial and Pharmaceutical Grade
Profitable Business of Industrial and Pharmaceutical Gases Start Oxygen Gas Plant Industrial and Pharmaceutical Grade

Industrial gases are employ... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Business Plan to Make Money from Lemon Grass Essential Oil Extraction
Business Plan to Make Money from Lemon Grass Essential Oil Extraction

Lemongrass oil (Cymbopogon ... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Manufacturing Business of Marine Shipping Containers Cargo Container Profitable Production Business of Freight Shipping Containers for Money Making
Manufacturing Business of Marine Shipping Containers Cargo Container Profitable Production Business of Freight Shipping Containers for Money Making

Shipping containers have ch... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Investment Opportunities in Production of Magnesium Stearate Best Business Ideas for investing in Chemical Industry
Investment Opportunities in Production of Magnesium Stearate Best Business Ideas for investing in Chemical Industry

 

At normal tempera... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Growing Business of Adhesive Fevicol Type Opportunities in Adhesives Industry
Growing Business of Adhesive Fevicol Type Opportunities in Adhesives Industry

 

Adhesives are a b... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Business of Blood Collection Bags
Business of Blood Collection Bags

Blood bag is a disposable bio-medical device used for collection, storage, transporta... Read More

Capacity : Blood Collection Bags 10,000 Nos Per Day
Plant and Machinery cost: 167.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):58.00 %
TCI :0.00 Lakhs
Cost of Project : 671.00Lakhs
Add To Inquiry Basket
Setup an Unsaturated Polyester Resin Plant
Setup an Unsaturated Polyester Resin Plant

 

Polyester resins ... Read More

Capacity : Unsaturated Polyester Resin 5 MT Per Day
Plant and Machinery cost: 166.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):49.00 %
TCI :0.00 Lakhs
Cost of Project : 485.00Lakhs
Add To Inquiry Basket
Production of Crumb Rubber Powder From Waste Tyres
Production of Crumb Rubber Powder From Waste Tyres

 

Crumb rubber is a... Read More

Capacity : Crumb Rubber Powder 24 MT per day By Product Steel Wire 4.8 MT per day
Plant and Machinery cost: 115.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):28.00%
Break Even Point (BEP):66.00 %
TCI :0.00 Lakhs
Cost of Project : 426.00Lakhs
Add To Inquiry Basket
Opportunities in Business of Disposable Plastic Syringes
Opportunities in Business of Disposable Plastic Syringes

 

Disposable Syring... Read More

Capacity : Disposable Plastic Syringes with Needles 1 ml Size each Packed in Polypack: 62,500 Nos Per Day Dis
Plant and Machinery cost: 441.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):34.00%
Break Even Point (BEP):40.00 %
TCI :0.00 Lakhs
Cost of Project : 2149.00Lakhs
Add To Inquiry Basket
Freeze Dried Products Manufacturing - Fruits & Vegetables (Dry Banana, Mango, Custurd Apple, Beetroot, Sapota, Dragon Fruit, Jamun and Green Peas)
Freeze Dried Products Manufacturing - Fruits & Vegetables (Dry Banana, Mango, Custurd Apple, Beetroot, Sapota, Dragon Fruit, Jamun and Green Peas)

Freeze-drying, technically referred to as Lyophilization, may be a process of sublimation where water m... Read More

Capacity : Freeze Dried Raw Banana: 19 Kgs / Day Freeze Dried Mango: 19 Kgs / Day Freeze Dried Custurd Apple:
Plant and Machinery cost: 95.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):24.00%
Break Even Point (BEP):60.00 %
TCI :0.00 Lakhs
Cost of Project : 199.00Lakhs
Add To Inquiry Basket
Investment Opportunities in Eco-Friendly Bamboo Toothbrush
Investment Opportunities in Eco-Friendly Bamboo Toothbrush

 

The toothbrush is an oral hygiene instrument wont to clean the teeth, gums, and tongue. It consist... Read More

Capacity : Bamboo Toothbrush: 3,000 Pcs / Day
Plant and Machinery cost: 54.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):25.00%
Break Even Point (BEP):54.00 %
TCI :0.00 Lakhs
Cost of Project : 183.00Lakhs
Add To Inquiry Basket
Production of Blood Collection Tubes (Vacutainer)
Production of Blood Collection Tubes (Vacutainer)

 

Production of Blood Collection Tubes (Vacuta... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Production of Freeze Dried Fruits & Vegetables
Production of Freeze Dried Fruits & Vegetables

Production of Freeze Dried Fruits & Vegetables (Dry Ban... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
HDPE-PP Woven Bags Project Report
HDPE-PP Woven Bags Project Report

 

Woven polypropylene/HDPE bags or simply woven PP/HDPE bags are considered to... Read More

Capacity : 184,616 Nos/Day
Plant and Machinery cost: 645.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):24.00%
Break Even Point (BEP):66.00 %
TCI :0.00 Lakhs
Cost of Project : 1411.00Lakhs
Add To Inquiry Basket
Business Plan for Baby Diaper (T-shape and Pull-up Pants)
Business Plan for Baby Diaper (T-shape and Pull-up Pants)

 

Diapers are primarily worn by children who are not yet potty trained and exp... Read More

Capacity : Pull-up Baby Pant Single Diaper (4 Pcs/Pkt): 60000 Pkt/day T-shape Open Style Baby Diaper (4 Pcs/Pkt
Plant and Machinery cost: 2600.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):29.00%
Break Even Point (BEP):36.00 %
TCI :0.00 Lakhs
Cost of Project : 4178.00Lakhs
Add To Inquiry Basket
Business plan for set up Multispeciality Hospital
Business plan for set up Multispeciality Hospital

 

A Multi-Speciality medical institution as a health care organization has ... Read More

Capacity : 100 bedded
Plant and Machinery cost: 13989.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):26.00%
Break Even Point (BEP):31.00 %
TCI :0.00 Lakhs
Cost of Project : 38304.00Lakhs
Add To Inquiry Basket
How to Start a Production Unit for Intravenous (IV) Cannulas
How to Start a Production Unit for Intravenous (IV) Cannulas

 

How to Sta... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Vitamin C or Ascorbate Manufacturing Plant from Sorbitol
Vitamin C or Ascorbate Manufacturing Plant from Sorbitol

 


Vitamin C or Ascorbate Manufacturing Plant from Sorbitol. Profitable Business Opportunities f...
Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Manufacturing Business of Helmet
Manufacturing Business of Helmet

A motorcycle helmet (protective headgear) is a type of helmet ... Read More

Capacity : 1500 Nos. per day
Plant and Machinery cost: 230.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):30.00%
Break Even Point (BEP):62.00 %
TCI :0.00 Lakhs
Cost of Project : 680.00Lakhs
Add To Inquiry Basket
Emerging Investment Opportunities for Entrepreneurs in Cold Storage Business in India Scope in Refrigerated Storage and Warehousing Industry
Emerging Investment Opportunities for Entrepreneurs in Cold Storage Business in India Scope in Refrigerated Storage and Warehousing Industry

Introduction:

Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Business Plan for Startup Multispeciality Hospital Business Ideas with High Profits 100 Bedded Multispeciality Hospital Profitable Project for Investment in Healthcare Industry
Business Plan for Startup Multispeciality Hospital Business Ideas with High Profits 100 Bedded Multispeciality Hospital Profitable Project for Investment in Healthcare Industry

Introduction: Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Baby Diaper T shape and Pull up Pants Manufacturing Business How to Start Production of Baby Diaper T shape and Pull up Pants, Investment Opportunities and Business Ideas
Baby Diaper T shape and Pull up Pants Manufacturing Business How to Start Production of Baby Diaper T shape and Pull up Pants, Investment Opportunities and Business Ideas

 

Introducti... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Emerging Investment Opportunities in Production Business of Glucose Saline (Intravenous Sugar Solution) IV fluids Used in Hospitals, Nursing Homes
Emerging Investment Opportunities in Production Business of Glucose Saline (Intravenous Sugar Solution) IV fluids Used in Hospitals, Nursing Homes

 

Introducti... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Banana Farming Business (Banana Cultivation is a Very Profitable Agriculture Business in India)
Banana Farming Business (Banana Cultivation is a Very Profitable Agriculture Business in India)

Introduction:

Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
NameCapacityRate of return (ROR):Cost of project
Auto Head Light 0 0.00 0.00
Profitable Business Ideas... 0 0.00 0.00
Production of Dehydrated ... 0 0.00 0.00
Business Ideas, Projects ... 0 0.00 0.00
Layer Poultry Farming Bus... 0 0.00 0.00
Readymade Garments Shirts: 1000 Pcs./Day Trousers : 1000 Pcs./Day 28.00 447.00
Pan Masala, Tobacco, Zard... Sada Pan Masala (5 gms Pouches & 100 gms Tin Pack) : 100 Kgs/Day Meetha Pan Masala (5 gms Pouches & 32.00 53.00
uPVC Profiles for Doors a... 8.3 MT/Day 26.00 681.00
Aluminium Foil Aluminium Foil Food Grade (thickness 0.006 mm to 0.150 mm) : 24 MT/Day 29.00 1253.00
Ice Making Plant 0 0.00 0.00
A Business Plan For Sanit... Sanitary Napkins 4,800 PKTS per day 27.00 84.00
Start Manufacturing Of Bl... - 32.00 985.00
Start Production Of Potat... Potato Flakes 2 MT Per Day 25.00 563.00
Setup Manufacturing Unit ... Saddle 7,000 Unit Per Day Pedals 10,000 Unit Per Day 31.00 575.00
Opportunity in Sodium Sul... Sodium Sulfide Flakes 10,000 MT Per Annum 30.00 1426.00
Business Plan for Lithium... - 29.00 812.00
Start Manufacturing Busin... Cargo Containers (Size 20 Feet) 34 Nos Per Day 29.00 1992.00
Start Cutting and Grindin... Cutting Disc Size: (115 mm x 1 mm) 2,000 Pcs Pr Day Grinding Disc (115 mm x 6 mm) 2,000 Pcs Pr Day 28.00 423.00
Mink Blankets Production - 27.00 6000.00
A Business Plan for Micro... Micronutrient Fortified Energy Dense Food 100 MT Per Day 28.00 3500.00
Start Business of Caustic... - 25.00 56500.00
Start Crumb Rubber Powder... Crumb Rubber Powder 10 MT Per Day By Product Steel Wire 2 MT Per Day 26.00 303.00
Start Rice Milling Plant - 28.00 824.00
Start Manufacturing of Wo... Wooden Pencils 69,444 Gross Per Day 28.00 2400.00
A Business Plan for Monoc... Monocrystalline Silicon Ingots 400 Kgs Per Day 28.00 555.00
A Business Plan for Fiber... Fiberglass Tape 24,000 Mtrs. Per Day 28.00 442.00
PSA Oxygen Plant 30 to 36 cylinders per day 0.00 0.00
PSA Oxygen Gas Plant 180 to 200 cylinders per day 0.00 0.00
Production Business of Ra... Disposable Safety Razors: 864,000 Units per Day Razor Blade: 172,800 Units per Day Steel Scrap: 500 34.51 2285.00
Investing into Business o... 12 MT per Day 33.83 1135.00
12345678910...

Showing 781 - 840 of 2601 Product(s)

Subject of your Interest

Information

  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

ABOUT NPCS

NIIR Project Consultancy Services (NPCS) is a renowned name in the industrial world, offering integrated technical consultancy services. Our team consists of engineers, planners, specialists, financial experts, economic analysts, and design specialists with extensive experience in their respective industries. We provide a range of services, including Detailed Project Reports, Business Plans for Manufacturing Plants, Start-up Ideas, Business Ideas for Entrepreneurs, and Start-up Business Opportunities. Our consultancy covers various domains such as industry trends, market research, manufacturing processes, machinery, raw materials, project reports, cost and revenue analysis, pre-feasibility studies for profitable manufacturing businesses, and project identification.

Our Services

At NPCS, we offer a comprehensive suite of services to help entrepreneurs and businesses succeed. Our key services include:

  • Detailed Project Report (DPR): We provide in-depth project reports that cover every aspect of a project, from feasibility studies to financial projections.
  • Business Plan for Manufacturing Plant: We assist in creating robust business plans tailored to manufacturing plants, ensuring a clear path to success.
  • Start-up Ideas and Business Opportunities: Our team helps identify profitable business ideas and opportunities for startups.
  • Market Research and Industry Trends: We conduct thorough market research and analyze industry trends to provide actionable insights.
  • Manufacturing Process and Machinery: We offer detailed information on manufacturing processes and the machinery required for various industries.
  • Raw Materials and Supply Chain: Our reports include comprehensive details on raw materials and supply chain management.
  • Cost and Revenue Analysis: We provide detailed cost and revenue analysis to help businesses understand their financial dynamics.
  • Project Feasibility and Market Study: Our feasibility studies and market assessments help in making informed investment decisions.
  • Technical and Commercial Counseling: We offer technical and commercial counseling for setting up new industrial projects and identifying the most profitable small-scale business opportunities.

Publications

NPCS also publishes a variety of books and reports that serve as valuable resources for entrepreneurs, manufacturers, industrialists, and professionals. Our publications include:

  • Process Technology Books: Detailed guides on various manufacturing processes.
  • Technical Reference Books: Comprehensive reference materials for industrial processes.
  • Self-Employment and Start-up Books: Guides for starting and running small businesses.
  • Industry Directories and Databases: Extensive directories and databases of businesses and industries.
  • Market Research Reports: In-depth market research reports on various industries.
  • Bankable Detailed Project Reports: Detailed project reports that are useful for securing financing and investments.

Our Approach

Our approach is centered around providing reliable and exhaustive information to help entrepreneurs make sound business decisions. We use a combination of primary and secondary research, cross-validated through industry interactions, to ensure accuracy and reliability. Our reports are designed to cover all critical aspects, including:

  • Introduction and Project Overview: An introduction to the project, including objectives, strategy, product history, properties, and applications.
  • Market Study and Assessment: Analysis of the current market scenario, demand and supply, future market potential, import and export statistics, and market opportunities.
  • Raw Material Requirements: Detailed information on raw materials, their properties, quality standards, and suppliers.
  • Personnel Requirements: Information on the manpower needed, including skilled and unskilled labor, managerial, technical, office staff, and marketing personnel.
  • Plant and Machinery: A comprehensive list of the machinery and equipment required, along with suppliers and manufacturers.
  • Manufacturing Process and Formulations: Detailed descriptions of the manufacturing process, including formulations, packaging, and process flow diagrams.
  • Infrastructure and Utilities: Requirements for land, building, utilities, and infrastructure, along with construction schedules and plant layouts.

Financial Details and Analysis

Our reports include detailed financial projections and analysis to help entrepreneurs understand the financial viability of their projects. Key financial details covered in our reports include:

  • Assumptions for Profitability Workings: Assumptions used in calculating profitability.
  • Plant Economics: Analysis of the economics of the plant, including production schedules and land and building costs.
  • Production Schedule: Detailed production schedules and timelines.
  • Capital Requirements: Breakdown of capital requirements, including plant and machinery costs, fixed assets, and working capital.
  • Overheads and Operating Expenses: Analysis of overheads and operating expenses, including utilities, salaries, and other costs.
  • Revenue and Profit Projections: Detailed revenue and profit projections, including turnover and profitability ratios.
  • Break-Even Analysis: Analysis of the break-even point, including variable and fixed costs, and profit volume ratios.

Reasons to Choose NPCS

There are several reasons why entrepreneurs and businesses choose NPCS for their consultancy needs:

  • Expertise and Experience: Our team has extensive experience and expertise in various industries, ensuring reliable and accurate consultancy services.
  • Comprehensive Reports: Our reports cover all critical aspects of a project, providing entrepreneurs with the information they need to make informed decisions.
  • Market Insights: We provide detailed market insights and analysis, helping businesses understand market dynamics and opportunities.
  • Technical and Commercial Guidance: We offer both technical and commercial guidance, helping businesses navigate the complexities of setting up and running industrial projects.
  • Tailored Solutions: Our services are tailored to meet the specific needs of each client, ensuring personalized and effective consultancy.

Market Survey cum Detailed Techno Economic Feasibility Report

Our Market Survey cum Detailed Techno Economic Feasibility Report includes the following information:

  • Project Introduction: An overview of the project, including objectives and strategy.
  • Project Objective and Strategy: Detailed information on the project's objectives and strategic approach.
  • History of the Product: A concise history of the product, including its development and evolution.
  • Product Properties and Specifications: Detailed information on the properties and specifications of the product, including BIS (Bureau of Indian Standards) provisions.
  • Uses and Applications: Information on the uses and applications of the product.

Market Study and Assessment

  • Current Indian Market Scenario: Analysis of the current market scenario in India.
  • Market Demand and Supply: Information on the present market demand and supply.
  • Future Market Demand and Forecast: Estimates of future market demand and forecasts.
  • Import and Export Statistics: Data on import and export statistics.
  • Market Opportunity: Identification of market opportunities.

Raw Material Requirements

  • List of Raw Materials: Detailed list of raw materials required.
  • Properties of Raw Materials: Information on the properties of raw materials.
  • Quality Standards: Quality standards and specifications for raw materials.
  • Suppliers and Manufacturers: List of suppliers and manufacturers of raw materials.

Personnel Requirements

  • Staff and Labor Requirements: Information on the requirement of staff and labor, including skilled and unskilled workers.
  • Managerial and Technical Staff: Details on the requirement of managerial and technical staff.
  • Office and Marketing Personnel: Information on the requirement of office and marketing personnel.

Plant and Machinery

  • List of Plant and Machinery: Comprehensive list of the plant and machinery required.
  • Miscellaneous Items and Equipment: Information on miscellaneous items and equipment.
  • Laboratory Equipment and Accessories: Details on laboratory equipment and accessories required.
  • Electrification and Utilities: Information on electrification and utility requirements.
  • Maintenance Costs: Details on maintenance costs.
  • Suppliers and Manufacturers: List of suppliers and manufacturers of plant and machinery.

Manufacturing Process and Formulations

  • Manufacturing Process: Detailed description of the manufacturing process, including formulations.
  • Packaging Requirements: Information on packaging requirements.
  • Process Flow Diagrams: Process flow diagrams illustrating the manufacturing process.

Infrastructure and Utilities

  • Project Location: Information on the project location.
  • Land Area Requirements: Details on the requirement of land area.
  • Land Rates: Information on land rates.
  • Built-Up Area: Details on the built-up area required.
  • Construction Schedule: Information on the construction schedule.
  • Plant Layout: Details on the plant layout and utility requirements.

Project at a Glance

Our reports provide a snapshot of the project, including:

  • Assumptions for Profitability Workings: Assumptions used in profitability calculations.
  • Plant Economics: Analysis of the plant's economics.
  • Production Schedule: Detailed production schedules.
  • Capital Requirements: Breakdown of capital requirements.
  • Overheads and Operating Expenses: Analysis of overheads and operating expenses.
  • Revenue and Profit Projections: Detailed revenue and profit projections.
  • Break-Even Analysis: Analysis of the break-even point.

Annexures

Our reports include several annexures that provide detailed financial and operational information:

  • Annexure 1: Cost of Project and Means of Finance: Breakdown of the project cost and financing means.
  • Annexure 2: Profitability and Net Cash Accruals: Analysis of profitability and net cash accruals.
  • Annexure 3: Working Capital Requirements: Details on working capital requirements.
  • Annexure 4: Sources and Disposition of Funds: Information on the sources and disposition of funds.
  • Annexure 5: Projected Balance Sheets: Projected balance sheets and financial ratios.
  • Annexure 6: Profitability Ratios: Analysis of profitability ratios.
  • Annexure 7: Break-Even Analysis: Detailed break-even analysis.
  • Annexures 8 to 11: Sensitivity Analysis: Sensitivity analysis for various financial parameters.
  • Annexure 12: Shareholding Pattern and Stake Status: Information on the shareholding pattern and stake status.
  • Annexure 13: Quantitative Details - Output/Sales/Stocks: Detailed information on the output, sales, and stocks, including the capacity of products/services, efficiency/yield percentages, and expected revenue.
  • Annexure 14: Product-Wise Domestic Sales Realization: Detailed analysis of domestic sales realization for each product.
  • Annexure 15: Total Raw Material Cost: Breakdown of the total cost of raw materials required for the project.
  • Annexure 16: Raw Material Cost Per Unit: Detailed cost analysis of raw materials per unit.
  • Annexure 17: Total Lab & ETP Chemical Cost: Analysis of laboratory and effluent treatment plant chemical costs.
  • Annexure 18: Consumables, Store, etc.: Details on the cost of consumables and store items.
  • Annexure 19: Packing Material Cost: Analysis of the total cost of packing materials.
  • Annexure 20: Packing Material Cost Per Unit: Detailed cost analysis of packing materials per unit.
  • Annexure 21: Employees Expenses: Comprehensive details on employee expenses, including salaries and wages.
  • Annexure 22: Fuel Expenses: Analysis of fuel expenses required for the project.
  • Annexure 23: Power/Electricity Expenses: Detailed breakdown of power and electricity expenses.
  • Annexure 24: Royalty & Other Charges: Information on royalty and other charges applicable to the project.
  • Annexure 25: Repairs & Maintenance Expenses: Analysis of repair and maintenance costs.
  • Annexure 26: Other Manufacturing Expenses: Detailed information on other manufacturing expenses.
  • Annexure 27: Administration Expenses: Breakdown of administration expenses.
  • Annexure 28: Selling Expenses: Analysis of selling expenses.
  • Annexure 29: Depreciation Charges – as per Books (Total): Detailed depreciation charges as per books.
  • Annexure 30: Depreciation Charges – as per Books (P&M): Depreciation charges for plant and machinery as per books.
  • Annexure 31: Depreciation Charges - As per IT Act WDV (Total): Depreciation charges as per the Income Tax Act written down value (total).
  • Annexure 32: Depreciation Charges - As per IT Act WDV (P&M): Depreciation charges for plant and machinery as per the Income Tax Act written down value.
  • Annexure 33: Interest and Repayment - Term Loans: Detailed analysis of interest and repayment schedules for term loans.
  • Annexure 34: Tax on Profits: Information on taxes applicable on profits.
  • Annexure 35: Projected Pay-Back Period and IRR: Analysis of the projected pay-back period and internal rate of return (IRR).

Why Choose NPCS?

Choosing NPCS for your project consultancy needs offers several advantages:

  • Comprehensive Analysis: Our reports provide a thorough analysis of all aspects of a project, helping you make informed decisions.
  • Expert Guidance: Our team of experts offers guidance on technical, commercial, and financial aspects of your project.
  • Reliable Information: We use reliable sources of information and databases to ensure the accuracy of our reports.
  • Customized Solutions: We offer customized solutions tailored to the specific needs of each client.
  • Market Insights: Our market research and analysis provide valuable insights into market trends and opportunities.
  • Technical Support: We offer ongoing technical support to help you successfully implement your project.

Testimonials

Don't just take our word for it. Here's what some of our satisfied clients have to say about NPCS:

  • John Doe, CEO of Manufacturing: "NPCS provided us with a comprehensive project report that covered all aspects of our manufacturing plant. Their insights and guidance were invaluable in helping us make informed decisions."
  • Jane Smith, Entrepreneur: "As a startup, we were looking for reliable information and support. NPCS's detailed reports and expert advice helped us navigate the complexities of setting up our business."
  • Rajesh Kumar, Industrialist: "NPCS's market research and feasibility studies were instrumental in helping us identify profitable business opportunities. Their reports are thorough and well-researched."

Case Studies

We have helped numerous clients achieve their business objectives through our comprehensive consultancy services. Here are a few case studies highlighting our successful projects:

  • Case Study 1: A leading manufacturer approached NPCS for setting up a new production line. Our detailed project report and market analysis helped them secure financing and successfully implement the project.
  • Case Study 2: A startup in the renewable energy sector needed a feasibility study for their new venture. NPCS provided a detailed analysis of market potential, raw material availability, and financial projections, helping the startup make informed decisions and attract investors.
  • Case Study 3: An established company looking to diversify into new product lines sought our consultancy services. Our comprehensive project report covered all aspects of the new venture, including manufacturing processes, machinery requirements, and market analysis, leading to a successful launch.

FAQs

Here are some frequently asked questions about our services:

What is a Detailed Project Report (DPR)?

A Detailed Project Report (DPR) is an in-depth report that covers all aspects of a project, including feasibility studies, market analysis, financial projections, manufacturing processes, and more.

How can NPCS help my startup?

NPCS provides a range of services tailored to startups, including business ideas, market research, feasibility studies, and detailed project reports. We help startups identify profitable opportunities and provide the support needed to successfully launch and grow their businesses.

What industries do you cover?

We cover a wide range of industries, including manufacturing, renewable energy, agrochemicals, pharmaceuticals, textiles, food processing, and more. Our expertise spans across various sectors, providing comprehensive consultancy services.

How do I get started with NPCS?

To get started with NPCS, simply contact us through our website, email, or phone. Our team will discuss your requirements and provide the necessary guidance and support to help you achieve your business goals.

Our Mission and Vision

Mission: Our mission is to provide comprehensive and reliable consultancy services that help entrepreneurs and businesses achieve their goals. We strive to deliver high-quality reports and support that enable our clients to make informed decisions and succeed in their ventures.

Vision: Our vision is to be the leading consultancy service provider in the industry, known for our expertise, reliability, and commitment to client success. We aim to continuously innovate and improve our services to meet the evolving needs of our clients and the industry.

NIIR Project Consultancy Services (NPCS) is your trusted partner for all your project consultancy needs. With our extensive experience, expertise, and commitment to excellence, we provide the support and guidance you need to succeed. Whether you are starting a new business, expanding your operations, or exploring new opportunities, NPCS is here to help you every step of the way. Contact us today to learn more about our services and how we can help you achieve your business goals.