Tripura is a state in Northeast India. The third-smallest state in the country, it covers 10,491 km2 (4,051 sq mi) and is bordered by Bangladesh (East Bengal) to the north, south, and west, and the Indian states of Assam and Mizoram to the east. Tripura is a landlocked state in North East India. The state has a tropical savanna climate, designated Aw under the Köppen climate classification. The undulating topography leads to local variations, particularly in the hill ranges. The four main seasons are winter, from December to February; pre-monsoon or summer, from March to April; monsoon, from May to September; and post-monsoon, from October to November.

Tripura's gross state domestic product for 2010–11 was 129.47 billion (US$2.1 billion) at constant price (2004–05), recording 5.71 per cent growth over the previous year. In the same period, the GDP of India was 48778.42 billion (US$790 billion), with a growth rate of 8.55 per cent. Tripura is an agrarian state with more than half of the population dependent on agriculture and allied activities. However, due to hilly terrain and forest cover, only 27 per cent of the land is available for cultivation. Rice, the major crop of the state, is cultivated in 91 per cent of the cropped area.

TOURISM

Tripura has a geographical area of about 10,492 sq. km. almost two-thirds of the state is under hilly terrain and it is surrounded on three sides by the deltaic basin of Bangladesh. The Tripura tribal’s are divided into two groups: Puran Tripuras and Natun Tripuras. The Puran Tripuras are the original inhabitants of the State and constitute a little over 16% of the total and 57% of the tribal population of the State. The Department of Tourism, Govt. of India, under the ministry of Tourism and Culture has been providing liberal financial and technical support for the tourism development in the state based on the projects received from the states. It is quite clear that Tripura has tremendous and quite unique tourism potential. This could be tapped mainly through the concept of Eco-tourism and Heritage tourism. Nature / wildlife tourism, adventure tourism, rural tourism, leisure tourism, pilgrimage tourism, international border tourism could be some special tourist packages. The Tourism Development in the Northeast region will depend on integrated approach, involving various government departments, private entrepreneurs, voluntary organizations and local community. This approach will also help in evolving local people’s perception towards tourism development as a strong tool for socio-economic up liftment.

INDUSTRIAL SECTOR

The State Government offers a package of incentives for setting up of industrial units, which is comparable to other states. Besides, the special incentive package i.e. North East Industrial and Investment Promotion Policy (NEIIP) declared by the Government of India for the North East Region is available to industrial units.

State Package of Incentives under Tripura Industrial Investment Promotion Incentive Scheme-

•                    Capital Investment Subsidy @ 30% and additional subsidy @ 2.5% for enterprises of ST, SC, & women individuals on Fixed Capital Investment.

•                    Full Reimbursement of Standard Certification Fees /Charges / other expenses on account of obtaining a standard Certification.

•                    Provides State Transport Subsidy for covering the portion for which Central Transport Subsidy is not available

•                    85% Exemption from the payment of Earnest Money and Security Deposits on tenders floated by State Govt. Department / Agencies.

Incentives declared by Central Government:

•                    Exemption of Excise Duty on finished products.

•                    Central Transport Subsidy.

•                    Income Tax Benefit.

•                    Capital Investment Subsidy.

•                    Comprehensive Insurance Scheme for insurance coverage. Subsidies to service sector, bio-technology and power generating industries.

INVESTMENT OPPORTUNITIES

Tripura offers an investor-friendly environment. The Government welcomes investments into the State, from both domestic and foreign investors.

•        Natural gas

Tripura has vast reserves of natural gas in non-associate form. The gas is of high quality, with high methane content of up to 97%. The availability of superior quality natural gas, at concessional price, offers a great opportunity to prospective investors, to set up gas-based industrial units, using natural gas

•        Information Technology (IT)

Tripura has been considered the second best IT destination in the North East. IT sector (including IT-enabled services) has been identified as one of the major potential growth sectors by the state. The high literacy rate of the State provides additional advantage for development of the sector.

•        Food Processing

The State government has identified food processing as a major thrust area. There is a vast potential for setting up of food processing units in the State. The agro-climatic conditions in Tripura are ideally suited for production of a large variety of horticultural crops.

•        Handicrafts

From time immemorial, Tripura has carved out a name for itself in the field of handicrafts. The gifted artisans produce wonderful objects of crafts from simple material like cane, bamboo and wood.

•        Tourism

Tripura is an attractive tourist destination. The state has a rich cultural heritage. There are number of historical Hindu and Buddhist sites.


INDUSTRIAL POLICY

•        To improve Basic as well Industrial Infrastructure.

•        Industrial Growth by attracting Private Investment.

•        To improve investment climate towards better regulation by removing barriers to competition.

•        Creation of hassle-free and congenial investment climate.

•        To bring significant increase in the State Domestic Product.

•        Widening of resources base of the state.

•        Development of connectivity (Internal road, railways and air & telecom).

•        Better social infrastructure Enabling Entrepreneurship -building capacities through entrepreneurial and technical skills, training and promotion of self-employment.

THRUST AREAS

•        Natural Gas

•        Food Processing

•        Rubber

•        Tea

•        Handicraft

•        Bamboo

•        Handloom

•        Tourism

•        Information Technology

•        Education

  •           Healthcare

The Department of Industries & Commerce was established to promote Village and Small-scale industries as well as medium and large scale industries in the State. While efforts are being made to promote entrepreneurship within the State, the outside investors in the public and private sectors are also encouraged both for their financial capabilities and technical expertise, for the medium and large-scale units. The major existing industrial area is the Industrial Growth Centre Complex at Bodhjungnagar which also includes Food Park, Rubber Park and Export Promotion Industrial Park. The other industrial sites near Agartala as the main business and industrial centres are Dukli, Arundhatinagar and Badharghat. The mineral resources are minor amounts of glass sands, limestone, plastic clay and hard rock and all of these materials are being used in varying degrees. Setting up of ceramic tiles unit and other mineral based industries are being encouraged in the private sector.


We can provide you detailed project reports on the following topics. Please select the projects of your interests.
Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the ost of raw material, formulating the cash flow statement, projecting the balance sheet etc.
We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics. Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.


We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Add multiple items to inquiry

Select the items and then press Add to inquiry button

Sort by :
Production of Ciprofloxacin Hydrochloride (CIPRO) - Active Pharma Ingredient
Production of Ciprofloxacin Hydrochloride (CIPRO) - Active Pharma Ingredient

Production of Ciprofloxacin Hydrochloride (CIPRO) - Active ... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Production of Urea Fertilizer
Production of Urea Fertilizer

Production of Urea Fertilizer. Business Plan & Investmen... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Market Research Report on-India Natural Food Colour Market - Industry-Size-Share-Trends-Analysis and Forecasts upto 2027
Market Research Report on-India Natural Food Colour Market - Industry-Size-Share-Trends-Analysis and Forecasts upto 2027

Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Business Plan for Starting Fish Feed Production
Business Plan for Starting Fish Feed Production

Fish feed are placed in the middle of the aquaculture value chain. Raw materials of marine or land based origin ... Read More

Capacity : Fish Feed : 100 MT / Day
Plant and Machinery cost: 845.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):41.00 %
TCI :0.00 Lakhs
Cost of Project : 2273.00Lakhs
Add To Inquiry Basket
Ginger Oil Manufacturing Business Plan
Ginger Oil Manufacturing Business Plan

Ginger, one of the most important and oldest of spices used in every kinds of food preparation. The rhizomes known in the trade as hand or races re... Read More

Capacity : Ginger Oil : 100 Kgs / Day
Plant and Machinery cost: 56.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):29.00%
Break Even Point (BEP):66.00 %
TCI :0.00 Lakhs
Cost of Project : 214.00Lakhs
Add To Inquiry Basket
Fiber Optical Cables (OFC) Manufacturing Unit
Fiber Optical Cables (OFC) Manufacturing Unit

A fiber cable is a structure for enclosing a fiber to enable it to maintain its performance for sufficient time ... Read More

Capacity : Fiber Optical Cables : 3,333.3 K. Meters/Day
Plant and Machinery cost: 1183.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):30.00%
Break Even Point (BEP):61.00 %
TCI :0.00 Lakhs
Cost of Project : 5070.00Lakhs
Add To Inquiry Basket
Bamboo Paper Based Products Manufacturing Tissue Paper, Paper Bags & Plates
Bamboo Paper Based Products Manufacturing Tissue Paper, Paper Bags & Plates

Tissue paper is produced by using the paper pulp of hardwood and softwood trees, water and chemicals. It is majorly used for hygiene and sanitation... Read More

Capacity : Tissue Paper per Packet 25 Pcs. each : 7,000 Pkts. / Day Paper Bag per Packet 10 Pcs. each : 7,200
Plant and Machinery cost: 73.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):60.00 %
TCI :0.00 Lakhs
Cost of Project : 307.00Lakhs
Add To Inquiry Basket
Start a Disposable Surgical-Medical-Glove Manufacturing Business
Start a Disposable Surgical-Medical-Glove Manufacturing Business

A surgical (surgeon’s) glove is made of natural or synthetic rubber intended to be worn by operating room ... Read More

Capacity : Disposable Surgical Latex Rubber Gloves (Wt. 4± 0.02 gms each) : 40,000 Pairs / Day
Plant and Machinery cost: 240.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):26.00%
Break Even Point (BEP):45.00 %
TCI :0.00 Lakhs
Cost of Project : 936.00Lakhs
Add To Inquiry Basket
7-Aminocephalosporanic Acid (7-ACA) Production
7-Aminocephalosporanic Acid (7-ACA) Production

7-Aminocephalosporanic Acid (7-ACA) Production – Acti... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Roll Forming with Metal Beam, Highway Guard Crash Barrier and Galvanizing Plant
Roll Forming with Metal Beam, Highway Guard Crash Barrier and Galvanizing Plant

Roll Forming with Metal Beam, Highway Guard Crash Barrier and Galvanizing Plant. Highly ... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Production of DCDA - Dicyandiamide (2-Cyanoguanidine)
Production of DCDA - Dicyandiamide (2-Cyanoguanidine)

Production of DCDA - Dicyandiamide (2-Cyanoguanidine). Active Phar... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Sterile Disposable Plastic Syringes Manufacturing
Sterile Disposable Plastic Syringes Manufacturing

Disposable Syringes are made from plastic material and are utilized in th... Read More

Capacity : Disposable Plastic Syringes 3 ml Size: 1,440 Boxes / Day (Each Box = 100 Pcs) Disposable Plastic Syr
Plant and Machinery cost: 340.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):18.00%
Break Even Point (BEP):62.00 %
TCI :0.00 Lakhs
Cost of Project : 772.00Lakhs
Add To Inquiry Basket
Biodegradable Plastic Bags- Biodegradable Compostable Carry Bag, Eco friendly Bag Production from Corn & Cassava Starch
Biodegradable Plastic Bags- Biodegradable Compostable Carry Bag, Eco friendly Bag Production from Corn & Cassava Starch

Corn starch has 25% amylose and 75% amylopectin. The amylose molecules loose lose water increase biodegradation ... Read More

Capacity : Biodegradable Plastic Bags from Corn Starch (Per Bag 25 gms Size): 6 MT / Day Biodegradable Plastic
Plant and Machinery cost: 1053.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):51.00 %
TCI :0.00 Lakhs
Cost of Project : 1768.00Lakhs
Add To Inquiry Basket
Production of  Bamboo Fabric, Tungsten Carbide Rod, Soyabean Products, Curcumin Extraction Unit, Red Oxide Primer, Ethanol, Red Iron Oxide, Sodium Chlorite Liquid from Powder
Production of Bamboo Fabric, Tungsten Carbide Rod, Soyabean Products, Curcumin Extraction Unit, Red Oxide Primer, Ethanol, Red Iron Oxide, Sodium Chlorite Liquid from Powder

 

Production... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Manufacturing of Banana Wafers
Manufacturing of Banana Wafers

Manufacturing of Banana Wafers (Deep Fried Snack Food). Profitable Food Processing Busine... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Used and Waste Oil Recycling Plant
Used and Waste Oil Recycling Plant

Waste oil is generated from industrial and non-industrial sources and primarily contains hydrocarbons. It’s goin... Read More

Capacity : Used Lubricating Oil: 7,600 Ltrs / Day Spent Clay: 800 Kgs / Day
Plant and Machinery cost: 118.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):12.00%
Break Even Point (BEP):59.00 %
TCI :0.00 Lakhs
Cost of Project : 664.00Lakhs
Add To Inquiry Basket
Camphor Powder (Kapoor-Kapur) Making Business Plan
Camphor Powder (Kapoor-Kapur) Making Business Plan

Camphor (Cinnamomum camphor) is a white, crystalline substance with a powerful odor and pungent taste, derived from th... Read More

Capacity : Camphor Powder: 3000 Kgs / Day
Plant and Machinery cost: 159.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):26.00%
Break Even Point (BEP):52.00 %
TCI :0.00 Lakhs
Cost of Project : 459.00Lakhs
Add To Inquiry Basket
Start a Disposable Plastic Syringes Manufacturing Business
Start a Disposable Plastic Syringes Manufacturing Business

Disposable Syringes are made from plastic material and are utilized in the sector of medical and veterinary science. because of their availability ... Read More

Capacity : Disposable Plastic Syringes 1 ml Size: 720 Boxes / Day (Each Boxes = 100 Pcs) Disposable Plastic Sy
Plant and Machinery cost: 513.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):28.00%
Break Even Point (BEP):63.00 %
TCI :0.00 Lakhs
Cost of Project : 1300.00Lakhs
Add To Inquiry Basket
Brushless DC Motor (BLDC) Fan Production
Brushless DC Motor (BLDC) Fan Production

 

BLDC stands for Brushless DC motors. The BLDC motor may be a synchronous motor powered by a DC electric sour... Read More

Capacity : BLDC Celling Fan (48"-52") : 1,000 Pcs. / Day
Plant and Machinery cost: 48.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):29.00%
Break Even Point (BEP):66.00 %
TCI :0.00 Lakhs
Cost of Project : 359.00Lakhs
Add To Inquiry Basket
Business Plan of Craft Beer (Microbrewery or Craft Brewery)
Business Plan of Craft Beer (Microbrewery or Craft Brewery)

A microbrewery or craft brewery may be a brewery that produces small amounts of beer (or sometimes root beer), t... Read More

Capacity : Craft Beer (Bottles 650 ml Size): 18,462 Nos. / Day Craft Beer (Al. Cans 500 ml Size): 24,000 Nos. /
Plant and Machinery cost: 1366.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):33.00%
Break Even Point (BEP):40.00 %
TCI :0.00 Lakhs
Cost of Project : 4432.00Lakhs
Add To Inquiry Basket
Manufacturing of Wheat Starch & Gluten
Manufacturing of Wheat Starch & Gluten

Starch may be a polysaccharide present in staple food crops such as maize, potato, rice, etc. In India, it's tradition... Read More

Capacity : Wheat Starch: 25 MT / Day Wheat Gluten: 6 MT / Day Bran, Fiber & Protein (Bye Product): 10 MT / Day
Plant and Machinery cost: 199.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):28.00%
Break Even Point (BEP):62.00 %
TCI :0.00 Lakhs
Cost of Project : 641.00Lakhs
Add To Inquiry Basket
Production of IV Fluids (BFS Technology)
Production of IV Fluids (BFS Technology)

Intravenous fluids are fluids which are intended to be administered to a patient intravenously, directly through... Read More

Capacity : IV Fluids (500 ml Pack): 22,400 Packs / Day IV Fluids (250 ml Pack): 22,400 Packs / Day
Plant and Machinery cost: 2505.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):42.00 %
TCI :0.00 Lakhs
Cost of Project : 4334.00Lakhs
Add To Inquiry Basket
Alginate, GI Cement, Composite Resin & Polycarboxylate Cement (Dental Materials)
Alginate, GI Cement, Composite Resin & Polycarboxylate Cement (Dental Materials)

A dental impression may be a negative imprint of hard (teeth) and soft tissues within the mouth from which a positive reproduction (cast or model) ... Read More

Capacity : Alginate (500 gms Packs) : 80 Packs / Day Glass Ionomer Cement (15 gms Packs with 10 gm Liquid) : 1,
Plant and Machinery cost: 56.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):31.00%
Break Even Point (BEP):64.00 %
TCI :0.00 Lakhs
Cost of Project : 212.00Lakhs
Add To Inquiry Basket
Production of Hot Melt Glue Stick
Production of Hot Melt Glue Stick

Thermoplastic adhesives, also called "hot melt" adhesives, applied hot and easily allowed to harden. These adhesives b... Read More

Capacity : Clear Transparant Glue Stick Size 200 mmx 7 mm (LxD):2,000 Kgs / Day Yellow Glue Stick Size 250 mmx
Plant and Machinery cost: 73.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):49.00 %
TCI :0.00 Lakhs
Cost of Project : 687.00Lakhs
Add To Inquiry Basket
Nitrile NBR powder free medical gloves (Disposable Nitrile Gloves Manufacturing Plant)
Nitrile NBR powder free medical gloves (Disposable Nitrile Gloves Manufacturing Plant)

Nitrile gloves are a type of disposable gloves made of synthetic rubber, this suggests there's no risk of latex allergies. They the foremost popula... Read More

Capacity : Disposable Nitrile Gloves: 100,000 Pcs. / Day
Plant and Machinery cost: 632.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):29.00%
Break Even Point (BEP):57.00 %
TCI :0.00 Lakhs
Cost of Project : 1239.00Lakhs
Add To Inquiry Basket
Active Zinc Oxide Production from Zinc Ash, Secondary Zinc Waste & EAF Dust
Active Zinc Oxide Production from Zinc Ash, Secondary Zinc Waste & EAF Dust

Active Zinc Oxide Production from Zinc Ash, Secondary Zinc W... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Frozen Layer Paratha (Fried Dough Food- Flatbread Native to the Indian Subcontinent)
Frozen Layer Paratha (Fried Dough Food- Flatbread Native to the Indian Subcontinent)

Frozen Layer Paratha (Fried Dough Food- Flatbread Native to the Indian Subcontinent) Manufac... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Manufacturing of Curcumin (Curcuma longa)
Manufacturing of Curcumin (Curcuma longa)

Curcumin is that the main biologically active phytochemical compound of Turmeric. Molecular chemical formula of ... Read More

Capacity : Curcumin Powder: 50 Kgs / Day Turmeric Oil : 20 Kgs / Day Deoiled Turmeric : 920 Kgs / Day
Plant and Machinery cost: 231.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):21.00%
Break Even Point (BEP):48.00 %
TCI :0.00 Lakhs
Cost of Project : 666.00Lakhs
Add To Inquiry Basket
Manufacturing of Red Iron Oxide (With Mining of Mineral Ore  Along with Processing and Beneficiation)
Manufacturing of Red Iron Oxide (With Mining of Mineral Ore Along with Processing and Beneficiation)

Iron (III) oxide or ferric oxide is that the inorganic compound with the formula Fe2O3. it's one in every of the... Read More

Capacity : Red Iron Oxide : 4,000 MT / Day
Plant and Machinery cost: 1096.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):31.00%
Break Even Point (BEP):50.00 %
TCI :0.00 Lakhs
Cost of Project : 4391.00Lakhs
Add To Inquiry Basket
Tungsten Carbide Rod Manufacturing
Tungsten Carbide Rod Manufacturing

Tungsten carbide (WC) is an inorganic chemical compound containing equal parts of tungsten and carbon ... Read More

Capacity : Tungsten Carbide Rod : 2 MT / Day
Plant and Machinery cost: 119.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):31.00%
Break Even Point (BEP):59.00 %
TCI :0.00 Lakhs
Cost of Project : 607.00Lakhs
Add To Inquiry Basket
Electronics (E-Waste, E-Scrap) Recycling Plant
Electronics (E-Waste, E-Scrap) Recycling Plant

 

Electronic wastes, "e-waste", "e-scrap", or "Waste Electrical and Electronic ... Read More

Capacity : Plastic Granules : 470 Kgs / Day Glass Scrap : 353 Kgs / Day Copper Scrap: 294 Kgs / Day Precious Me
Plant and Machinery cost: 107.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):28.00%
Break Even Point (BEP):58.00 %
TCI :0.00 Lakhs
Cost of Project : 336.00Lakhs
Add To Inquiry Basket
Manufacturing of IV Fluids (BFS Technology)
Manufacturing of IV Fluids (BFS Technology)

Fluids are given when someone's body fluid volume falls. There are a number of things w... Read More

Capacity : IV Fluids (500 ml Size Pack): 146,748 Units / Day IV Fluids (100 ml Size Pack): 153,252 Units / Day
Plant and Machinery cost: 4099.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):25.00%
Break Even Point (BEP):41.00 %
TCI :0.00 Lakhs
Cost of Project : 5808.00Lakhs
Add To Inquiry Basket
Production of Toughened Glass (Toughened Safety Glass)
Production of Toughened Glass (Toughened Safety Glass)

Toughening may be a process where the glass is heated at high temperatures to f... Read More

Capacity : Toughened Glass (Size of Sheet 8 ft x 12 ft.): 4,000 Sq. Ft. / Day
Plant and Machinery cost: 332.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):24.00%
Break Even Point (BEP):46.00 %
TCI :0.00 Lakhs
Cost of Project : 939.00Lakhs
Add To Inquiry Basket
Production of Jute Fabric and Gunny Bags
Production of Jute Fabric and Gunny Bags
Jute is a natural fibre obtained from the bark of the white jute plant or the tossa jute plant. It is also known as the golden fibre owing to its gold... Read More
Capacity : Jute Sacks (0.6 Kg each):100,000,000 Nos. / annum
Plant and Machinery cost: 1485.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):28.00%
Break Even Point (BEP):50.00 %
TCI :0.00 Lakhs
Cost of Project : 5168.00Lakhs
Add To Inquiry Basket
Surgical & N95 Masks
Surgical & N95 Masks
A surgical mask, also known as a procedure mask, medical mask or simply as a face mask, is intended to be worn by health professionals during surgery ... Read More
Capacity : 3-Layer Surgical Face Masks (each Pkts = 25 Pcs.) :380 Pkts / day N95 Face Masks (each Pkts = 5 Pc
Plant and Machinery cost: 166.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):25.00%
Break Even Point (BEP):66.00 %
TCI :0.00 Lakhs
Cost of Project : 266.00Lakhs
Add To Inquiry Basket
Disposable Face Masks
Disposable Face Masks
A surgical mask, also known as a procedure mask, medical mask or simply as a face mask, is intended to be worn by health professionals during surgery ... Read More
Capacity : Surgical Face Masks (each Pkts 25 Pcs.): 1,694 Pkts / day N95 Face Masks (each Pkts 5 Pcs.): 8,467 P
Plant and Machinery cost: 688.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):58.00 %
TCI :0.00 Lakhs
Cost of Project : 1400.00Lakhs
Add To Inquiry Basket
Gunny (Jute) Bags from Fabric
Gunny (Jute) Bags from Fabric
Jute is a bio-degradable eco-friendly item. Prior to nineties, jute fabric was used for making low cost carry bags and gunny bags for packing rice, pa... Read More
Capacity : Gunny (Jute) Bags: 25,000 Nos / day
Plant and Machinery cost: 81.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):28.00%
Break Even Point (BEP):61.00 %
TCI :0.00 Lakhs
Cost of Project : 369.00Lakhs
Add To Inquiry Basket
Manufacturing of Gold and Diamond Jewellery
Manufacturing of Gold and Diamond Jewellery

 

Manufacturing of Gold and Diamond Jewellery. Opportunities for Entrepreneurs to Start Own Business o... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Aluminium Foil (Food Packaging and Pharmaceuticals Foils)
Aluminium Foil (Food Packaging and Pharmaceuticals Foils)

Aluminium plays a major role in the modern world through its innumerable forms of applications- from kitchenware... Read More

Capacity : Food Packaging Grade Aluminium Foil :10.0 MT / day Pharmaceutical Grade Aluminium Foil : 10.0 MT /
Plant and Machinery cost: 1413.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):28.00%
Break Even Point (BEP):62.00 %
TCI :0.00 Lakhs
Cost of Project : 2190.00Lakhs
Add To Inquiry Basket
Atmanirbhar Bharat Abhiyan (Self-Reliant India Mission)
Atmanirbhar Bharat Abhiyan (Self-Reliant India Mission)

 

Atmanirbhar Bharat Abhiyan (Self-Reliant ... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Startup Opportunities in Active Pharma Ingredients
Startup Opportunities in Active Pharma Ingredients

 

Startup Opportunities in Active Pharma Ing... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Disposable Nitrile Gloves
Disposable Nitrile Gloves

Nitrile gloves are a type of disposable gloves made from synthetic rubber, this means there is no risk of latex allerg... Read More

Capacity : Disposable Nitrile Gloves:100,000.0 Pcs. / day
Plant and Machinery cost: 632.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):29.00%
Break Even Point (BEP):57.00 %
TCI :0.00 Lakhs
Cost of Project : 1239.00Lakhs
Add To Inquiry Basket
Production of A4 and A3 Size Paper.
Production of A4 and A3 Size Paper.

 

Production of A4 and A3 Size Paper. Profitable Investment in Copier Pap... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Disposable Nitrile Gloves (Powder Free)
Disposable Nitrile Gloves (Powder Free)

Nitrile gloves are a type of disposable gloves made from synthetic rubber, this means there is no risk of latex ... Read More

Capacity : Disposable Nitrile Gloves (Powder Free): 500,000.0 Pcs. / day
Plant and Machinery cost: 1321.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):30.00%
Break Even Point (BEP):45.00 %
TCI :0.00 Lakhs
Cost of Project : 2925.00Lakhs
Add To Inquiry Basket
Production of Plastic Toys
Production of Plastic Toys

Production of Plastic Toys. Most Profitable Kids Toys Industry to Start.

Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Medical Devices & Disposables Industry in India (Disposable Plastic Syringes, Disposable Mask & Gloves, Blood Bags, X-Ray, Ultrasound, ECG, Pacemakers, IV Fluid Sets and Other Devices)
Medical Devices & Disposables Industry in India (Disposable Plastic Syringes, Disposable Mask & Gloves, Blood Bags, X-Ray, Ultrasound, ECG, Pacemakers, IV Fluid Sets and Other Devices)

Medical Devices & Disposables Industry in India (Disposable Plastic Syringes, Disposable ... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Peanut Butter
Peanut Butter

Peanut butter is a food paste made from ground nut or peanut. It consists essentially of cleaned, graded, blanch... Read More

Capacity : Peanut Butter: 8,000 Kgs / day
Plant and Machinery cost: 126.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):29.00%
Break Even Point (BEP):53.00 %
TCI :0.00 Lakhs
Cost of Project : 562.00Lakhs
Add To Inquiry Basket
Production of Peanut Butter, Cellophane Film, E-Waste Recycling, Aluminium Foil Containers, Holiday Resort, Rice Milling Unit, Sodium Borohydride, Refrigerant Gas R22, Peanut Butter.
Production of Peanut Butter, Cellophane Film, E-Waste Recycling, Aluminium Foil Containers, Holiday Resort, Rice Milling Unit, Sodium Borohydride, Refrigerant Gas R22, Peanut Butter.

Production of Peanut Butter, Cellophane Film, E-Waste Recycling, Aluminium Foil Containers, Holiday Resort, Ri... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Refrigerant Gas R22 Bottling Plant
Refrigerant Gas R22 Bottling Plant

Refrigerant Gas R22 Bottling Plant. Best Investment Opportunities in Industrial Gases. <... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Startup Business Opportunities in Holiday Resort (Three Star Grade)
Startup Business Opportunities in Holiday Resort (Three Star Grade)

Startup Business Opportunities in Holiday Resort (Three Star Grade). Investment Opportunities for Entrepreneurs ... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Herbal Ayurvedic Hand Sanitizer
Herbal Ayurvedic Hand Sanitizer

 

Herbal/Ayurvedic <... Read More

Capacity : Herbal/Ayurvedic Hand Sanitizer (100 ml Size each): 20,000 Bottles / day
Plant and Machinery cost: 14.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):36.00%
Break Even Point (BEP):44.00 %
TCI :0.00 Lakhs
Cost of Project : 357.00Lakhs
Add To Inquiry Basket
Cellophane Film Manufacturing Plant
Cellophane Film Manufacturing Plant

Cellophane Film Manufacturing Plant. Investment Opportunities in Cellophane Packaging Films Industry.

Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
API Production. Cephalexin, Ampicillin Trihydrate, Ibuprofen and Paracetamol
API Production. Cephalexin, Ampicillin Trihydrate, Ibuprofen and Paracetamol

API Production. Cephalexin, Ampicillin Trihydrate, Ibuprofen and Paracetamol. Production of Active ... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Production of Fiberglass Transparent LPG Cylinders
Production of Fiberglass Transparent LPG Cylinders

A gas cylinder may be a pressure vessel for storage and containment of gases at above air pressure. High-pressur... Read More

Capacity : Transparent LPG Cylinder: 2,243.6 Nos. / Day
Plant and Machinery cost: 28274.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):25.00%
Break Even Point (BEP):27.00 %
TCI :0.00 Lakhs
Cost of Project : 32012.00Lakhs
Add To Inquiry Basket
HDPE Pipes
HDPE Pipes

HDPE pipes and fittings have a high degree of corrosion resistance, are light in weight. Yet tough and durable, have e... Read More

Capacity : 9600 Kgs per day
Plant and Machinery cost: 143.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):29.00%
Break Even Point (BEP):62.00 %
TCI :0.00 Lakhs
Cost of Project : 434.00Lakhs
Add To Inquiry Basket
Steel Shots & Grits
Steel Shots & Grits

 

Steel shots and steel grits are used in both static & site blasting equipme... Read More

Capacity : 100 MT per day
Plant and Machinery cost: 1643.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):29.00%
Break Even Point (BEP):67.00 %
TCI :0.00 Lakhs
Cost of Project : 3780.00Lakhs
Add To Inquiry Basket
Zinc Sulphate Monohydrate (Agriculture & Food Grade)
Zinc Sulphate Monohydrate (Agriculture & Food Grade)

Zinc Sulfate Monohydrate can be used as a dietary supplement and as a nutrient. Zinc is an important antioxidant nutri... Read More

Capacity : Zinc Sulphate Monohydrate (Agri. Grade): 7 MT per day Zinc Sulphate Monohydrate (Food Grade): 3 MT p
Plant and Machinery cost: 300.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):26.00%
Break Even Point (BEP):50.00 %
TCI :0.00 Lakhs
Cost of Project : 602.00Lakhs
Add To Inquiry Basket
Setting Up of Planetarium
Setting Up of Planetarium

Setting Up of Planetarium. Profitable Investment Opportunity in Astronomy Education S... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Manufacturing of Truck Mud Flaps
Manufacturing of Truck Mud Flaps

Manufacturing of Truck Mud Flaps. Best Investment in Automobile Industry. Opportuniti... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Metal Cutting Wheels (TMT Bar Cutting)
Metal Cutting Wheels (TMT Bar Cutting)

A cut off wheel, also known as a cutoff wheel or cutting disc, is an arbor-mounted tool that may be used with angle gr... Read More

Capacity : Metal Cutting Wheels 8" Size (per packs 5 Pcs.): 5120 Packs per day
Plant and Machinery cost: 143.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):28.00%
Break Even Point (BEP):55.00 %
TCI :0.00 Lakhs
Cost of Project : 323.00Lakhs
Add To Inquiry Basket
NameCapacityRate of return (ROR):Cost of project
Golf Course 20000 MEMBERS 26.00 2100.00
Pharmaceutical College (B... B. Pharma 100 Student, D. Pharma 150 Student 0.00 396.43
A Business Plan For Sanit... Sanitary Napkins 4,800 PKTS per day 27.00 84.00
Start Manufacturing Of Bl... - 32.00 985.00
Start Production Of Potat... Potato Flakes 2 MT Per Day 25.00 563.00
Setup Manufacturing Unit ... Saddle 7,000 Unit Per Day Pedals 10,000 Unit Per Day 31.00 575.00
Opportunity in Sodium Sul... Sodium Sulfide Flakes 10,000 MT Per Annum 30.00 1426.00
Business Plan for Lithium... - 29.00 812.00
Start Manufacturing Busin... Cargo Containers (Size 20 Feet) 34 Nos Per Day 29.00 1992.00
Start Cutting and Grindin... Cutting Disc Size: (115 mm x 1 mm) 2,000 Pcs Pr Day Grinding Disc (115 mm x 6 mm) 2,000 Pcs Pr Day 28.00 423.00
Mink Blankets Production - 27.00 6000.00
A Business Plan for Micro... Micronutrient Fortified Energy Dense Food 100 MT Per Day 28.00 3500.00
Start Business of Caustic... - 25.00 56500.00
Start Crumb Rubber Powder... Crumb Rubber Powder 10 MT Per Day By Product Steel Wire 2 MT Per Day 26.00 303.00
Start Rice Milling Plant - 28.00 824.00
Start Manufacturing of Wo... Wooden Pencils 69,444 Gross Per Day 28.00 2400.00
A Business Plan for Monoc... Monocrystalline Silicon Ingots 400 Kgs Per Day 28.00 555.00
A Business Plan for Fiber... Fiberglass Tape 24,000 Mtrs. Per Day 28.00 442.00
Ferrochrome Manufacturing... Ferrochrome 135 MT Per Day 10.00 40400.00
Start a Business Of LPG C... LPG Cylinders (14.20 Kgs Size) 3,334.0 Nos. per day LPG Cylinders (19 Kgs Size) 3,334.0 Nos. per day 32.00 3475.00
Start Banana Wine Product... Banana Wine (750 ml size Bollte) 2,960 Bottles per day 25.00 1189.00
Activated Carbon From Ric... Activated Carbon 2,000 Kg Per Day 25.00 606.00
Set Up Activated Carbon F... Activated Carbon 2,000 Kg Per Day 25.00 606.00
Set Up Business of Flat G... 0 0.00 0.00
Set Up Business of Double... 0 0.00 0.00
A Business Plan for Bio-D... 10,000 MT Per Annum 28.00 8100.00
Sulphur Powder Manufactur... 20,000 MT Per Annum 24.00 4318.00
Manufacturing Business Gi... 60,000 Kg. Per Annum , 1,44,000 Kg. Per Annum 28.00 528.00
Start a Business of Manuf... 1,500 Dz. Per Annum 35.00 34.00
Start Activated Carbon fr... 0 0.00 0.00
12345678910...

Showing 841 - 900 of 2601 Product(s)

Subject of your Interest

Information

  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

ABOUT NPCS

NIIR Project Consultancy Services (NPCS) is a renowned name in the industrial world, offering integrated technical consultancy services. Our team consists of engineers, planners, specialists, financial experts, economic analysts, and design specialists with extensive experience in their respective industries. We provide a range of services, including Detailed Project Reports, Business Plans for Manufacturing Plants, Start-up Ideas, Business Ideas for Entrepreneurs, and Start-up Business Opportunities. Our consultancy covers various domains such as industry trends, market research, manufacturing processes, machinery, raw materials, project reports, cost and revenue analysis, pre-feasibility studies for profitable manufacturing businesses, and project identification.

Our Services

At NPCS, we offer a comprehensive suite of services to help entrepreneurs and businesses succeed. Our key services include:

  • Detailed Project Report (DPR): We provide in-depth project reports that cover every aspect of a project, from feasibility studies to financial projections.
  • Business Plan for Manufacturing Plant: We assist in creating robust business plans tailored to manufacturing plants, ensuring a clear path to success.
  • Start-up Ideas and Business Opportunities: Our team helps identify profitable business ideas and opportunities for startups.
  • Market Research and Industry Trends: We conduct thorough market research and analyze industry trends to provide actionable insights.
  • Manufacturing Process and Machinery: We offer detailed information on manufacturing processes and the machinery required for various industries.
  • Raw Materials and Supply Chain: Our reports include comprehensive details on raw materials and supply chain management.
  • Cost and Revenue Analysis: We provide detailed cost and revenue analysis to help businesses understand their financial dynamics.
  • Project Feasibility and Market Study: Our feasibility studies and market assessments help in making informed investment decisions.
  • Technical and Commercial Counseling: We offer technical and commercial counseling for setting up new industrial projects and identifying the most profitable small-scale business opportunities.

Publications

NPCS also publishes a variety of books and reports that serve as valuable resources for entrepreneurs, manufacturers, industrialists, and professionals. Our publications include:

  • Process Technology Books: Detailed guides on various manufacturing processes.
  • Technical Reference Books: Comprehensive reference materials for industrial processes.
  • Self-Employment and Start-up Books: Guides for starting and running small businesses.
  • Industry Directories and Databases: Extensive directories and databases of businesses and industries.
  • Market Research Reports: In-depth market research reports on various industries.
  • Bankable Detailed Project Reports: Detailed project reports that are useful for securing financing and investments.

Our Approach

Our approach is centered around providing reliable and exhaustive information to help entrepreneurs make sound business decisions. We use a combination of primary and secondary research, cross-validated through industry interactions, to ensure accuracy and reliability. Our reports are designed to cover all critical aspects, including:

  • Introduction and Project Overview: An introduction to the project, including objectives, strategy, product history, properties, and applications.
  • Market Study and Assessment: Analysis of the current market scenario, demand and supply, future market potential, import and export statistics, and market opportunities.
  • Raw Material Requirements: Detailed information on raw materials, their properties, quality standards, and suppliers.
  • Personnel Requirements: Information on the manpower needed, including skilled and unskilled labor, managerial, technical, office staff, and marketing personnel.
  • Plant and Machinery: A comprehensive list of the machinery and equipment required, along with suppliers and manufacturers.
  • Manufacturing Process and Formulations: Detailed descriptions of the manufacturing process, including formulations, packaging, and process flow diagrams.
  • Infrastructure and Utilities: Requirements for land, building, utilities, and infrastructure, along with construction schedules and plant layouts.

Financial Details and Analysis

Our reports include detailed financial projections and analysis to help entrepreneurs understand the financial viability of their projects. Key financial details covered in our reports include:

  • Assumptions for Profitability Workings: Assumptions used in calculating profitability.
  • Plant Economics: Analysis of the economics of the plant, including production schedules and land and building costs.
  • Production Schedule: Detailed production schedules and timelines.
  • Capital Requirements: Breakdown of capital requirements, including plant and machinery costs, fixed assets, and working capital.
  • Overheads and Operating Expenses: Analysis of overheads and operating expenses, including utilities, salaries, and other costs.
  • Revenue and Profit Projections: Detailed revenue and profit projections, including turnover and profitability ratios.
  • Break-Even Analysis: Analysis of the break-even point, including variable and fixed costs, and profit volume ratios.

Reasons to Choose NPCS

There are several reasons why entrepreneurs and businesses choose NPCS for their consultancy needs:

  • Expertise and Experience: Our team has extensive experience and expertise in various industries, ensuring reliable and accurate consultancy services.
  • Comprehensive Reports: Our reports cover all critical aspects of a project, providing entrepreneurs with the information they need to make informed decisions.
  • Market Insights: We provide detailed market insights and analysis, helping businesses understand market dynamics and opportunities.
  • Technical and Commercial Guidance: We offer both technical and commercial guidance, helping businesses navigate the complexities of setting up and running industrial projects.
  • Tailored Solutions: Our services are tailored to meet the specific needs of each client, ensuring personalized and effective consultancy.

Market Survey cum Detailed Techno Economic Feasibility Report

Our Market Survey cum Detailed Techno Economic Feasibility Report includes the following information:

  • Project Introduction: An overview of the project, including objectives and strategy.
  • Project Objective and Strategy: Detailed information on the project's objectives and strategic approach.
  • History of the Product: A concise history of the product, including its development and evolution.
  • Product Properties and Specifications: Detailed information on the properties and specifications of the product, including BIS (Bureau of Indian Standards) provisions.
  • Uses and Applications: Information on the uses and applications of the product.

Market Study and Assessment

  • Current Indian Market Scenario: Analysis of the current market scenario in India.
  • Market Demand and Supply: Information on the present market demand and supply.
  • Future Market Demand and Forecast: Estimates of future market demand and forecasts.
  • Import and Export Statistics: Data on import and export statistics.
  • Market Opportunity: Identification of market opportunities.

Raw Material Requirements

  • List of Raw Materials: Detailed list of raw materials required.
  • Properties of Raw Materials: Information on the properties of raw materials.
  • Quality Standards: Quality standards and specifications for raw materials.
  • Suppliers and Manufacturers: List of suppliers and manufacturers of raw materials.

Personnel Requirements

  • Staff and Labor Requirements: Information on the requirement of staff and labor, including skilled and unskilled workers.
  • Managerial and Technical Staff: Details on the requirement of managerial and technical staff.
  • Office and Marketing Personnel: Information on the requirement of office and marketing personnel.

Plant and Machinery

  • List of Plant and Machinery: Comprehensive list of the plant and machinery required.
  • Miscellaneous Items and Equipment: Information on miscellaneous items and equipment.
  • Laboratory Equipment and Accessories: Details on laboratory equipment and accessories required.
  • Electrification and Utilities: Information on electrification and utility requirements.
  • Maintenance Costs: Details on maintenance costs.
  • Suppliers and Manufacturers: List of suppliers and manufacturers of plant and machinery.

Manufacturing Process and Formulations

  • Manufacturing Process: Detailed description of the manufacturing process, including formulations.
  • Packaging Requirements: Information on packaging requirements.
  • Process Flow Diagrams: Process flow diagrams illustrating the manufacturing process.

Infrastructure and Utilities

  • Project Location: Information on the project location.
  • Land Area Requirements: Details on the requirement of land area.
  • Land Rates: Information on land rates.
  • Built-Up Area: Details on the built-up area required.
  • Construction Schedule: Information on the construction schedule.
  • Plant Layout: Details on the plant layout and utility requirements.

Project at a Glance

Our reports provide a snapshot of the project, including:

  • Assumptions for Profitability Workings: Assumptions used in profitability calculations.
  • Plant Economics: Analysis of the plant's economics.
  • Production Schedule: Detailed production schedules.
  • Capital Requirements: Breakdown of capital requirements.
  • Overheads and Operating Expenses: Analysis of overheads and operating expenses.
  • Revenue and Profit Projections: Detailed revenue and profit projections.
  • Break-Even Analysis: Analysis of the break-even point.

Annexures

Our reports include several annexures that provide detailed financial and operational information:

  • Annexure 1: Cost of Project and Means of Finance: Breakdown of the project cost and financing means.
  • Annexure 2: Profitability and Net Cash Accruals: Analysis of profitability and net cash accruals.
  • Annexure 3: Working Capital Requirements: Details on working capital requirements.
  • Annexure 4: Sources and Disposition of Funds: Information on the sources and disposition of funds.
  • Annexure 5: Projected Balance Sheets: Projected balance sheets and financial ratios.
  • Annexure 6: Profitability Ratios: Analysis of profitability ratios.
  • Annexure 7: Break-Even Analysis: Detailed break-even analysis.
  • Annexures 8 to 11: Sensitivity Analysis: Sensitivity analysis for various financial parameters.
  • Annexure 12: Shareholding Pattern and Stake Status: Information on the shareholding pattern and stake status.
  • Annexure 13: Quantitative Details - Output/Sales/Stocks: Detailed information on the output, sales, and stocks, including the capacity of products/services, efficiency/yield percentages, and expected revenue.
  • Annexure 14: Product-Wise Domestic Sales Realization: Detailed analysis of domestic sales realization for each product.
  • Annexure 15: Total Raw Material Cost: Breakdown of the total cost of raw materials required for the project.
  • Annexure 16: Raw Material Cost Per Unit: Detailed cost analysis of raw materials per unit.
  • Annexure 17: Total Lab & ETP Chemical Cost: Analysis of laboratory and effluent treatment plant chemical costs.
  • Annexure 18: Consumables, Store, etc.: Details on the cost of consumables and store items.
  • Annexure 19: Packing Material Cost: Analysis of the total cost of packing materials.
  • Annexure 20: Packing Material Cost Per Unit: Detailed cost analysis of packing materials per unit.
  • Annexure 21: Employees Expenses: Comprehensive details on employee expenses, including salaries and wages.
  • Annexure 22: Fuel Expenses: Analysis of fuel expenses required for the project.
  • Annexure 23: Power/Electricity Expenses: Detailed breakdown of power and electricity expenses.
  • Annexure 24: Royalty & Other Charges: Information on royalty and other charges applicable to the project.
  • Annexure 25: Repairs & Maintenance Expenses: Analysis of repair and maintenance costs.
  • Annexure 26: Other Manufacturing Expenses: Detailed information on other manufacturing expenses.
  • Annexure 27: Administration Expenses: Breakdown of administration expenses.
  • Annexure 28: Selling Expenses: Analysis of selling expenses.
  • Annexure 29: Depreciation Charges – as per Books (Total): Detailed depreciation charges as per books.
  • Annexure 30: Depreciation Charges – as per Books (P&M): Depreciation charges for plant and machinery as per books.
  • Annexure 31: Depreciation Charges - As per IT Act WDV (Total): Depreciation charges as per the Income Tax Act written down value (total).
  • Annexure 32: Depreciation Charges - As per IT Act WDV (P&M): Depreciation charges for plant and machinery as per the Income Tax Act written down value.
  • Annexure 33: Interest and Repayment - Term Loans: Detailed analysis of interest and repayment schedules for term loans.
  • Annexure 34: Tax on Profits: Information on taxes applicable on profits.
  • Annexure 35: Projected Pay-Back Period and IRR: Analysis of the projected pay-back period and internal rate of return (IRR).

Why Choose NPCS?

Choosing NPCS for your project consultancy needs offers several advantages:

  • Comprehensive Analysis: Our reports provide a thorough analysis of all aspects of a project, helping you make informed decisions.
  • Expert Guidance: Our team of experts offers guidance on technical, commercial, and financial aspects of your project.
  • Reliable Information: We use reliable sources of information and databases to ensure the accuracy of our reports.
  • Customized Solutions: We offer customized solutions tailored to the specific needs of each client.
  • Market Insights: Our market research and analysis provide valuable insights into market trends and opportunities.
  • Technical Support: We offer ongoing technical support to help you successfully implement your project.

Testimonials

Don't just take our word for it. Here's what some of our satisfied clients have to say about NPCS:

  • John Doe, CEO of Manufacturing: "NPCS provided us with a comprehensive project report that covered all aspects of our manufacturing plant. Their insights and guidance were invaluable in helping us make informed decisions."
  • Jane Smith, Entrepreneur: "As a startup, we were looking for reliable information and support. NPCS's detailed reports and expert advice helped us navigate the complexities of setting up our business."
  • Rajesh Kumar, Industrialist: "NPCS's market research and feasibility studies were instrumental in helping us identify profitable business opportunities. Their reports are thorough and well-researched."

Case Studies

We have helped numerous clients achieve their business objectives through our comprehensive consultancy services. Here are a few case studies highlighting our successful projects:

  • Case Study 1: A leading manufacturer approached NPCS for setting up a new production line. Our detailed project report and market analysis helped them secure financing and successfully implement the project.
  • Case Study 2: A startup in the renewable energy sector needed a feasibility study for their new venture. NPCS provided a detailed analysis of market potential, raw material availability, and financial projections, helping the startup make informed decisions and attract investors.
  • Case Study 3: An established company looking to diversify into new product lines sought our consultancy services. Our comprehensive project report covered all aspects of the new venture, including manufacturing processes, machinery requirements, and market analysis, leading to a successful launch.

FAQs

Here are some frequently asked questions about our services:

What is a Detailed Project Report (DPR)?

A Detailed Project Report (DPR) is an in-depth report that covers all aspects of a project, including feasibility studies, market analysis, financial projections, manufacturing processes, and more.

How can NPCS help my startup?

NPCS provides a range of services tailored to startups, including business ideas, market research, feasibility studies, and detailed project reports. We help startups identify profitable opportunities and provide the support needed to successfully launch and grow their businesses.

What industries do you cover?

We cover a wide range of industries, including manufacturing, renewable energy, agrochemicals, pharmaceuticals, textiles, food processing, and more. Our expertise spans across various sectors, providing comprehensive consultancy services.

How do I get started with NPCS?

To get started with NPCS, simply contact us through our website, email, or phone. Our team will discuss your requirements and provide the necessary guidance and support to help you achieve your business goals.

Our Mission and Vision

Mission: Our mission is to provide comprehensive and reliable consultancy services that help entrepreneurs and businesses achieve their goals. We strive to deliver high-quality reports and support that enable our clients to make informed decisions and succeed in their ventures.

Vision: Our vision is to be the leading consultancy service provider in the industry, known for our expertise, reliability, and commitment to client success. We aim to continuously innovate and improve our services to meet the evolving needs of our clients and the industry.

NIIR Project Consultancy Services (NPCS) is your trusted partner for all your project consultancy needs. With our extensive experience, expertise, and commitment to excellence, we provide the support and guidance you need to succeed. Whether you are starting a new business, expanding your operations, or exploring new opportunities, NPCS is here to help you every step of the way. Contact us today to learn more about our services and how we can help you achieve your business goals.