Tripura is a state in Northeast India. The third-smallest state in the country, it covers 10,491 km2 (4,051 sq mi) and is bordered by Bangladesh (East Bengal) to the north, south, and west, and the Indian states of Assam and Mizoram to the east. Tripura is a landlocked state in North East India. The state has a tropical savanna climate, designated Aw under the Köppen climate classification. The undulating topography leads to local variations, particularly in the hill ranges. The four main seasons are winter, from December to February; pre-monsoon or summer, from March to April; monsoon, from May to September; and post-monsoon, from October to November.

Tripura's gross state domestic product for 2010–11 was 129.47 billion (US$2.1 billion) at constant price (2004–05), recording 5.71 per cent growth over the previous year. In the same period, the GDP of India was 48778.42 billion (US$790 billion), with a growth rate of 8.55 per cent. Tripura is an agrarian state with more than half of the population dependent on agriculture and allied activities. However, due to hilly terrain and forest cover, only 27 per cent of the land is available for cultivation. Rice, the major crop of the state, is cultivated in 91 per cent of the cropped area.

TOURISM

Tripura has a geographical area of about 10,492 sq. km. almost two-thirds of the state is under hilly terrain and it is surrounded on three sides by the deltaic basin of Bangladesh. The Tripura tribal’s are divided into two groups: Puran Tripuras and Natun Tripuras. The Puran Tripuras are the original inhabitants of the State and constitute a little over 16% of the total and 57% of the tribal population of the State. The Department of Tourism, Govt. of India, under the ministry of Tourism and Culture has been providing liberal financial and technical support for the tourism development in the state based on the projects received from the states. It is quite clear that Tripura has tremendous and quite unique tourism potential. This could be tapped mainly through the concept of Eco-tourism and Heritage tourism. Nature / wildlife tourism, adventure tourism, rural tourism, leisure tourism, pilgrimage tourism, international border tourism could be some special tourist packages. The Tourism Development in the Northeast region will depend on integrated approach, involving various government departments, private entrepreneurs, voluntary organizations and local community. This approach will also help in evolving local people’s perception towards tourism development as a strong tool for socio-economic up liftment.

INDUSTRIAL SECTOR

The State Government offers a package of incentives for setting up of industrial units, which is comparable to other states. Besides, the special incentive package i.e. North East Industrial and Investment Promotion Policy (NEIIP) declared by the Government of India for the North East Region is available to industrial units.

State Package of Incentives under Tripura Industrial Investment Promotion Incentive Scheme-

•                    Capital Investment Subsidy @ 30% and additional subsidy @ 2.5% for enterprises of ST, SC, & women individuals on Fixed Capital Investment.

•                    Full Reimbursement of Standard Certification Fees /Charges / other expenses on account of obtaining a standard Certification.

•                    Provides State Transport Subsidy for covering the portion for which Central Transport Subsidy is not available

•                    85% Exemption from the payment of Earnest Money and Security Deposits on tenders floated by State Govt. Department / Agencies.

Incentives declared by Central Government:

•                    Exemption of Excise Duty on finished products.

•                    Central Transport Subsidy.

•                    Income Tax Benefit.

•                    Capital Investment Subsidy.

•                    Comprehensive Insurance Scheme for insurance coverage. Subsidies to service sector, bio-technology and power generating industries.

INVESTMENT OPPORTUNITIES

Tripura offers an investor-friendly environment. The Government welcomes investments into the State, from both domestic and foreign investors.

•        Natural gas

Tripura has vast reserves of natural gas in non-associate form. The gas is of high quality, with high methane content of up to 97%. The availability of superior quality natural gas, at concessional price, offers a great opportunity to prospective investors, to set up gas-based industrial units, using natural gas

•        Information Technology (IT)

Tripura has been considered the second best IT destination in the North East. IT sector (including IT-enabled services) has been identified as one of the major potential growth sectors by the state. The high literacy rate of the State provides additional advantage for development of the sector.

•        Food Processing

The State government has identified food processing as a major thrust area. There is a vast potential for setting up of food processing units in the State. The agro-climatic conditions in Tripura are ideally suited for production of a large variety of horticultural crops.

•        Handicrafts

From time immemorial, Tripura has carved out a name for itself in the field of handicrafts. The gifted artisans produce wonderful objects of crafts from simple material like cane, bamboo and wood.

•        Tourism

Tripura is an attractive tourist destination. The state has a rich cultural heritage. There are number of historical Hindu and Buddhist sites.


INDUSTRIAL POLICY

•        To improve Basic as well Industrial Infrastructure.

•        Industrial Growth by attracting Private Investment.

•        To improve investment climate towards better regulation by removing barriers to competition.

•        Creation of hassle-free and congenial investment climate.

•        To bring significant increase in the State Domestic Product.

•        Widening of resources base of the state.

•        Development of connectivity (Internal road, railways and air & telecom).

•        Better social infrastructure Enabling Entrepreneurship -building capacities through entrepreneurial and technical skills, training and promotion of self-employment.

THRUST AREAS

•        Natural Gas

•        Food Processing

•        Rubber

•        Tea

•        Handicraft

•        Bamboo

•        Handloom

•        Tourism

•        Information Technology

•        Education

  •           Healthcare

The Department of Industries & Commerce was established to promote Village and Small-scale industries as well as medium and large scale industries in the State. While efforts are being made to promote entrepreneurship within the State, the outside investors in the public and private sectors are also encouraged both for their financial capabilities and technical expertise, for the medium and large-scale units. The major existing industrial area is the Industrial Growth Centre Complex at Bodhjungnagar which also includes Food Park, Rubber Park and Export Promotion Industrial Park. The other industrial sites near Agartala as the main business and industrial centres are Dukli, Arundhatinagar and Badharghat. The mineral resources are minor amounts of glass sands, limestone, plastic clay and hard rock and all of these materials are being used in varying degrees. Setting up of ceramic tiles unit and other mineral based industries are being encouraged in the private sector.


We can provide you detailed project reports on the following topics. Please select the projects of your interests.
Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the ost of raw material, formulating the cash flow statement, projecting the balance sheet etc.
We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics. Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.


We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Add multiple items to inquiry

Select the items and then press Add to inquiry button

Sort by :
Start Your Own Craft Brewery or Distillery (Startup)
Start Your Own Craft Brewery or Distillery (Startup)

Start Your Own Craft Brewery or Distillery (Startup). Production of Craft Beer. Microbrewery, Pubbrewery, Brew Pub... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Profitable Disposable Products Manufacturing Business Ideas
Profitable Disposable Products Manufacturing Business Ideas

Profitable Disposable Products Manufacturing Business Ideas. Starting Your Own Production Business of Thermocol Plate, Don... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Dairy Farming
Dairy Farming

Dairy farming is a class of agriculture for long-term production of milk, which is processed for eventual sale of a dairy p... Read More

Capacity : Cow Milk (Ltrs.) : 756000 Units /Annum Manure (MT) : 1080 Units /Annum Calf (Nos.) : 126 Units /A
Plant and Machinery cost: 47.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):21.00%
Break Even Point (BEP):50.00 %
TCI :0.00 Lakhs
Cost of Project : 529.00Lakhs
Add To Inquiry Basket
Floral Foam
Floral Foam

Floral foam is a dense, lightweight and porous material that can be cut into virtually any shape. It holds its shape when wet and provides both wat... Read More

Capacity : 12000 Pcs./Day
Plant and Machinery cost: 68.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):46.00 %
TCI :0.00 Lakhs
Cost of Project : 270.00Lakhs
Add To Inquiry Basket
Fish and Prawn Feed
Fish and Prawn Feed

The production of fish meal from fish offal and surplus fish benefits both the national economy and the fisherman and should not be regarded as a s... Read More

Capacity : Fish Feed : 30 MT/Day Prawn Feed : 30 MT/Day
Plant and Machinery cost: 84.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):28.00%
Break Even Point (BEP):60.00 %
TCI :0.00 Lakhs
Cost of Project : 390.00Lakhs
Add To Inquiry Basket
Craft Beer
Craft Beer

"Craft brewing" is a more encompassing term for developments in the industry succeeding the microbrewing movemen... Read More

Capacity : 5000 Ltrs./Day
Plant and Machinery cost: 383.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):26.00%
Break Even Point (BEP):52.00 %
TCI :0.00 Lakhs
Cost of Project : 830.00Lakhs
Add To Inquiry Basket
Cold Water Soluble Starch
Cold Water Soluble Starch

Cold water starch is a modified starch used to stiffen textile and other related fabric. It is simply used in cold (room te... Read More

Capacity : 48 MT/Day
Plant and Machinery cost: 165.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):70.00 %
TCI :0.00 Lakhs
Cost of Project : 505.00Lakhs
Add To Inquiry Basket
Wax Floor Polish
Wax Floor Polish

Floor Wax provides deep nourishing protection for new and reclaimed interior wooden floors, giving them a traditional, soft, natural sheen, whilst ... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Metal Polishing Soap
Metal Polishing Soap

Metal Polishing Soap is mostly used for attaining mirror finishing in Stainless Steel items. Metal Polishing Soap can be used for final polishing i... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
E-Waste Recycling Plant
E-Waste Recycling Plant

Electronic wastes, "e-waste", "e-scrap", or "Waste Electrical and Electronic Equipment" ("WEEE") is a descr... Read More

Capacity : Copper Wire :1.67 MT/day Plastic Granules :7.43 MT/day Glass :3.23 MT/day Fer
Plant and Machinery cost: 131.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):26.00%
Break Even Point (BEP):30.00 %
TCI :0.00 Lakhs
Cost of Project : 1272.00Lakhs
Add To Inquiry Basket
Protein Bar
Protein Bar

Protein bars, which contain some form of milk-derived or plant-based protein like whey, hemp, pea or rice protein. <... Read More

Capacity : 40000 Pcs./day Each pcs 50 gms
Plant and Machinery cost: 129.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):32.00%
Break Even Point (BEP):50.00 %
TCI :0.00 Lakhs
Cost of Project : 644.00Lakhs
Add To Inquiry Basket
Bicycle Manufacturing
Bicycle Manufacturing

Bicycles are one of the oldest forms of transportation. Even today millions of people travel by bicycle daily to the... Read More

Capacity : 2000 Nos./day
Plant and Machinery cost: 336.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):29.00%
Break Even Point (BEP):56.00 %
TCI :0.00 Lakhs
Cost of Project : 1589.00Lakhs
Add To Inquiry Basket
Power Transformer
Power Transformer

A transformer is a device that transfers electrical energy from one circuit to another through inductively ... Read More

Capacity : Power Transformers (132/33 KV, 10000 KVA Core Type Oil Cooled) :100 Nos/
Plant and Machinery cost: 85.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):45.00 %
TCI :0.00 Lakhs
Cost of Project : 169.00Lakhs
Add To Inquiry Basket
Wood Plastic Composite (WPC)
Wood Plastic Composite (WPC)

WPCs are composites containing a wood component in particle form (wood particles/wood flour) and a polymer matrix. They ... Read More

Capacity : 10,000,000Sq.Ft./Annum
Plant and Machinery cost: 144.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):31.00%
Break Even Point (BEP):63.00 %
TCI :0.00 Lakhs
Cost of Project : 558.00Lakhs
Add To Inquiry Basket
uPVC Pipes
uPVC Pipes

uPVC pipes remain neutral to all transported fluids. uPVC is completely inert and is widely used for transporting liquids made fo... Read More

Capacity : 4,302 Meters/Day
Plant and Machinery cost: 189.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):58.00 %
TCI :0.00 Lakhs
Cost of Project : 632.00Lakhs
Add To Inquiry Basket
Pan Masala
Pan Masala

Pan Masala is a balanced mixture of betel leaf with lime, areca nut, clove, cardamom, mint, tobacco, essence and other ingr... Read More

Capacity : Sada Pan Masala : 165 Kgs/Day Meetha Pan Masala : 165 Kgs/Day Zarda Pan Masala : 170 Kgs/Day
Plant and Machinery cost: 12.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):54.00 %
TCI :0.00 Lakhs
Cost of Project : 191.00Lakhs
Add To Inquiry Basket
PET Preform
PET Preform

The most widely used thermoplastic polyester is poly ethlene terephthalate (long-chain molecule consists of repeating units... Read More

Capacity : 100,000Nos. /Day
Plant and Machinery cost: 101.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):28.00%
Break Even Point (BEP):50.00 %
TCI :0.00 Lakhs
Cost of Project : 290.00Lakhs
Add To Inquiry Basket
Bio-Plastic Products  (GLASSES, PLATES AND BAGS)
Bio-Plastic Products (GLASSES, PLATES AND BAGS)

Plastics have become an important part of modern life and are used in different sectors of applications like packaging, bui... Read More

Capacity : Bio-Plastic Glasses (wt. each Glass 16 gms) : 62500 Pcs./Day Bio-Plastic Plates (wt. ea
Plant and Machinery cost: 155.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):42.00 %
TCI :0.00 Lakhs
Cost of Project : 718.00Lakhs
Add To Inquiry Basket
Production of I.V. Fluids (Saline and Dextrose)
Production of I.V. Fluids (Saline and Dextrose)

Production of I.V. Fluids (Saline and Dextrose). Intravenous Solution (IV) Manufacturing Business with Blow-Fill-Se... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Spices
Spices

Spices (100% EOU)

Spices are non-leafy part... Read More

Capacity : Red Chilli Powder : 200 Kgs. /day Sambhar Masala : 200 Kgs. /day Biryani Masala : 200 Kgs. /day Chi
Plant and Machinery cost: 20.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):29.00%
Break Even Point (BEP):53.00 %
TCI :0.00 Lakhs
Cost of Project : 204.00Lakhs
Add To Inquiry Basket
Phosphate Rich Organic Manure (PROM)
Phosphate Rich Organic Manure (PROM)

Phosphates play a vital role in the balanced nutrition of plants. Most of the soils in India are low to medium in phosphate... Read More

Capacity : 1000000 MT /Annum
Plant and Machinery cost: 290.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):28.00%
Break Even Point (BEP):39.00 %
TCI :0.00 Lakhs
Cost of Project : 4612.00Lakhs
Add To Inquiry Basket
Wall Paper Starch
Wall Paper Starch

Starches are inherently unsuitable for most applications and, therefore, must be modified chemically and/or physically to en... Read More

Capacity : 32 MT /Day
Plant and Machinery cost: 52.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):29.00%
Break Even Point (BEP):72.00 %
TCI :0.00 Lakhs
Cost of Project : 367.00Lakhs
Add To Inquiry Basket
I V Fluids (BFS Technology)
I V Fluids (BFS Technology)

Intravenous fluids are fluids which are intended to be administered to a patient intravenously, directly through the circul... Read More

Capacity : 48000 Bottles /Day
Plant and Machinery cost: 252.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):29.00%
Break Even Point (BEP):52.00 %
TCI :0.00 Lakhs
Cost of Project : 833.00Lakhs
Add To Inquiry Basket
Readymade Garments
Readymade Garments

Readymade Garments (E.O.U.)

Readymade Read More

Capacity : Readymade Garments (Jeans) :120,000 Nos/annum Buying House Commission Realisation: 300 Nos/ann
Plant and Machinery cost: 56.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):25.00%
Break Even Point (BEP):61.00 %
TCI :0.00 Lakhs
Cost of Project : 384.00Lakhs
Add To Inquiry Basket
5 Star Hotel
5 Star Hotel

A hospitality unit such as a restaurant, hotel, or an amusement park consists of multiple groups such as facility maintenan... Read More

Capacity : 150 Nos of Room
Plant and Machinery cost: 1940.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):30.00%
Break Even Point (BEP):38.00 %
TCI :0.00 Lakhs
Cost of Project : 4925.00Lakhs
Add To Inquiry Basket
Ready-Mix Concrete (RMC Plant) Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics, Production Schedule, Working Capital Requirement, Plant Layout, Process Flow Sheet, Cost of Project, Projected Balance Sheets, Profitability Ratios, Break Even Analysis
Ready-Mix Concrete (RMC Plant) Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics, Production Schedule, Working Capital Requirement, Plant Layout, Process Flow Sheet, Cost of Project, Projected Balance Sheets, Profitability Ratios, Break Even Analysis

Ready-mix concrete is concrete that is manufactured in a factory or batching plant, according to a set recipe, and then delivered to a work site by... Read More

Capacity : 240 Cubic Meter/Day
Plant and Machinery cost: 86.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):42.00%
Break Even Point (BEP):36.00 %
TCI :0.00 Lakhs
Cost of Project : 936.00Lakhs
Add To Inquiry Basket
Production of Toilet Paper Rolls, Facial Tissue & Paper Napkins  Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics, Production Schedule, Working Capital Requirement, Plant Layout, Process Flow Sheet, Cost of Project, Projected Balance Sheets, Profitability Ratios, Break Even Analysis
Production of Toilet Paper Rolls, Facial Tissue & Paper Napkins Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics, Production Schedule, Working Capital Requirement, Plant Layout, Process Flow Sheet, Cost of Project, Projected Balance Sheets, Profitability Ratios, Break Even Analysis

The tissues paper sector has boomed over the last few years. With a move to more luxurious tissue paper and ultra-absorbent... Read More

Capacity : Toilet Paper Rolls : 7,200,000 Nos./annum Paper Napkin (100 Pcs.): 558,000 Nos./annum Facial Tissue
Plant and Machinery cost: 59.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):29.00%
Break Even Point (BEP):41.00 %
TCI :0.00 Lakhs
Cost of Project : 341.00Lakhs
Add To Inquiry Basket
Cold Storage
Cold Storage

India is the largest producer of fruits and second largest producer of vegetables in the world. In spite of that per capita... Read More

Capacity : Fruits, Vegetables, Pulses & Spices Store :20,000 MT/annum
Plant and Machinery cost: 93.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):23.00%
Break Even Point (BEP):34.00 %
TCI :0.00 Lakhs
Cost of Project : 903.00Lakhs
Add To Inquiry Basket
Razor Blade
Razor Blade

Blade manufacture is an important industry in several of the industrially advanced countries of the world. Carbon steel ... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
LED Street Light Assembling
LED Street Light Assembling

The key strength of LED lighting is reduced power consumption. LED’s are available with at the most Lumen efficiency of 110... Read More

Capacity : 132,000 Pcs/annum
Plant and Machinery cost: 18.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):28.00%
Break Even Point (BEP):73.00 %
TCI :0.00 Lakhs
Cost of Project : 129.00Lakhs
Add To Inquiry Basket
E-Waste Recycling Plant
E-Waste Recycling Plant

Electronic wastes, "e-waste", "e-scrap", or "Waste Electrical and Electronic Equipment" ("WEEE") is a description of surplu... Read More

Capacity : 7500 MT/annum
Plant and Machinery cost: 131.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):26.00%
Break Even Point (BEP):30.00 %
TCI :0.00 Lakhs
Cost of Project : 1272.00Lakhs
Add To Inquiry Basket
Wood Plastic Composite (WPC)
Wood Plastic Composite (WPC)

Wood-plastic composites (WPCs) are a product class that has been developing over the last 40 years resulting in increased a... Read More

Capacity : 1,440,000 KGS/annum
Plant and Machinery cost: 146.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):26.00%
Break Even Point (BEP):56.00 %
TCI :0.00 Lakhs
Cost of Project : 391.00Lakhs
Add To Inquiry Basket
Plastic Seals for Electricity Meters
Plastic Seals for Electricity Meters

Security seals are mechanisms used to seal meters in a way that provides tamper evidence and some level of security. Such s... Read More

Capacity : 20,000 Th. Nos. /annum
Plant and Machinery cost: 84.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):28.00%
Break Even Point (BEP):77.00 %
TCI :0.00 Lakhs
Cost of Project : 158.00Lakhs
Add To Inquiry Basket
Roller Flour Mill
Roller Flour Mill

Roller Flour Mills involved in commercial milling operations and unorganized sector consisting of mainly Chakkis. Around... Read More

Capacity : Maida : 50 MT /Day Sooji : 12 MT /Day Wheat Flour : 20 MT /Day Wheat Bran : 18 MT /Day
Plant and Machinery cost: 323.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):29.00%
Break Even Point (BEP):56.00 %
TCI :0.00 Lakhs
Cost of Project : 746.00Lakhs
Add To Inquiry Basket
Wood Plastic Composite (WPC)
Wood Plastic Composite (WPC)

WPCs are composites containing a wood component in particle form (wood particles/wood flour) and a polymer matrix. They ... Read More

Capacity : 4800 Kgs /Day
Plant and Machinery cost: 146.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):56.00 %
TCI :0.00 Lakhs
Cost of Project : 391.00Lakhs
Add To Inquiry Basket
Furfural from Bagasse and Corncobs
Furfural from Bagasse and Corncobs

Furfural is produced from agricultural waste biomass that contain pentosans, which are aldose to sugars, composed of sma... Read More

Capacity : 4000 Kgs. /Day
Plant and Machinery cost: 168.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):17.00%
Break Even Point (BEP):68.00 %
TCI :0.00 Lakhs
Cost of Project : 444.00Lakhs
Add To Inquiry Basket
Herbal Body Care Beauty Products (Herbal Body Wash, Shampoo, Hair Conditioners, Soaps, Lotions and Scrubs)
Herbal Body Care Beauty Products (Herbal Body Wash, Shampoo, Hair Conditioners, Soaps, Lotions and Scrubs)

Natural skin care uses topical creams and lotions made of ingredients available in nature. Much of the recent literature... Read More

Capacity : Herbal Body Care Beauty Products (Herbal Body Wash, Shampoo, Hair Conditioners, Soaps, Lotions and
Plant and Machinery cost: 65.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):35.00%
Break Even Point (BEP):54.00 %
TCI :0.00 Lakhs
Cost of Project : 542.00Lakhs
Add To Inquiry Basket
Composite Cans from Paper Tube
Composite Cans from Paper Tube

Composite can is composed of a can body; - a top closure; and - a bottom closure. It is also sometimes called a Combi container. It has a con... Read More

Capacity : 12,000,000/Annum
Plant and Machinery cost: 39.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):30.00%
Break Even Point (BEP):52.00 %
TCI :0.00 Lakhs
Cost of Project : 222.00Lakhs
Add To Inquiry Basket
Carbon Fiber Composites
Carbon Fiber Composites

A Carbon Fiber is a fibrous carbon material having a micro graphite crystal structure made by fibrillation of Acrylic resin... Read More

Capacity : 300,000 Kgs/Annum
Plant and Machinery cost: 111.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):61.00 %
TCI :0.00 Lakhs
Cost of Project : 451.00Lakhs
Add To Inquiry Basket
Paper Cups, Plates and Boxes
Paper Cups, Plates and Boxes

Paper cups and glasses are made in a variety of sizes and shapes according to the amount of material to be filled. They are... Read More

Capacity : Paper Cups : 18,720,00 Pcs/annum Paper Plates : 21,600,000 Pcs/annum Corrugated Boxes : 1
Plant and Machinery cost: 46.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):30.00%
Break Even Point (BEP):52.00 %
TCI :0.00 Lakhs
Cost of Project : 292.00Lakhs
Add To Inquiry Basket
Button Mushroom Cultivation
Button Mushroom Cultivation

Button Mushroom is the most popular mushroom variety grown and consumed the world over. In India, its production earlier ... Read More

Capacity : 150,000 Kgs/annum
Plant and Machinery cost: 86.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):28.00%
Break Even Point (BEP):49.00 %
TCI :0.00 Lakhs
Cost of Project : 164.00Lakhs
Add To Inquiry Basket
Sterile Water for Injection with BFS Technology
Sterile Water for Injection with BFS Technology

The objective of formulating and compounding sterile preparations is to provide adosage form of a labeled drug, in the st... Read More

Capacity : Ampoules 5 ml Size : 300,000 Th. Nos. /annum Ampoules 10 ml Size : 260,000 Th. Nos. /ann
Plant and Machinery cost: 607.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):28.00%
Break Even Point (BEP):55.00 %
TCI :0.00 Lakhs
Cost of Project : 917.00Lakhs
Add To Inquiry Basket
Bricks from Fly Ash
Bricks from Fly Ash

Fly Ash brick is a product of basic cement clinker materials i.e. fly ash, stone dust/sand, lime, gypsum and bonding agent.... Read More

Capacity : 24,000,000 Pcs/annum
Plant and Machinery cost: 152.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):28.00%
Break Even Point (BEP):46.00 %
TCI :0.00 Lakhs
Cost of Project : 336.00Lakhs
Add To Inquiry Basket
Detergent Cake & Powder
Detergent Cake & Powder

Detergents are defined as complete washing or cleaning products, which contain among their ingredients an organic surface-active ... Read More

Capacity : Detergent Cake :180,000 Kgs/annum Detergent Powder :180,000 Kgs/annum
Plant and Machinery cost: 15.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):76.00 %
TCI :0.00 Lakhs
Cost of Project : 36.00Lakhs
Add To Inquiry Basket
LPG Cylinders
LPG Cylinders

LPG Cylinder is an essential item for filling liquefied petroleum gas used for domestic and industrial purpose. The body of LPG c... Read More

Capacity : LPG Cylinders (14.20 Kgs Size) :150,000 Nos/annum LPG Cylinders (19 Kgs Size) :150,000 Nos/ann
Plant and Machinery cost: 355.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):28.00%
Break Even Point (BEP):56.00 %
TCI :0.00 Lakhs
Cost of Project : 943.00Lakhs
Add To Inquiry Basket
Sanitary Napkin & Baby Diapers
Sanitary Napkin & Baby Diapers

A diaper or nappy is a kind of underwear that allows one to defecate or urinate in a discreet manner. Diapers are primarily worn ... Read More

Capacity : Sanitary Napkins (8 Pcs/Pkt) : 4,500,000 packets/annum Baby Diapers (4 Pcs/Pkt) : 6,000,000 pack
Plant and Machinery cost: 658.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):29.00%
Break Even Point (BEP):50.00 %
TCI :0.00 Lakhs
Cost of Project : 1184.00Lakhs
Add To Inquiry Basket
Moringa Oleifera (Drumstick) Powder  Drumstick Powder
Moringa Oleifera (Drumstick) Powder Drumstick Powder

India has a major agribusiness sector which has achieved remarkable successes over the last three and a half decades. Dr... Read More

Capacity : 600,000 Kgs/annum
Plant and Machinery cost: 57.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):28.00%
Break Even Point (BEP):70.00 %
TCI :0.00 Lakhs
Cost of Project : 110.00Lakhs
Add To Inquiry Basket
Water Park- How to Open Water Park Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics, Working Capital Requirement, Plant Layout, Process Flow Sheet, Cost of Project, Projected Balance Sheets, Profitability Ratios, Break Even Analysis
Water Park- How to Open Water Park Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics, Working Capital Requirement, Plant Layout, Process Flow Sheet, Cost of Project, Projected Balance Sheets, Profitability Ratios, Break Even Analysis

A water park is an amusement park that features water play areas, such as swimming pools, water slides, splash pads, spray grounds (water playgroun... Read More

Capacity : 1000 visitors / Day
Plant and Machinery cost: 84.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):41.00%
Break Even Point (BEP):38.00 %
TCI :0.00 Lakhs
Cost of Project : 362.00Lakhs
Add To Inquiry Basket
Diaper (Baby and Adult) and Sanitary Napkins
Diaper (Baby and Adult) and Sanitary Napkins

Diaper (Baby and Adult) and Sanitary Napkins

Manufacturing Plant, Detailed Pro... Read More

Capacity : Baby Diapers : 3000000 Pkts/annum Adult Diapers : 1500000 Pkts/annum Sanitary Napkins : 4500000
Plant and Machinery cost: 1029.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):29.00%
Break Even Point (BEP):51.00 %
TCI :0.00 Lakhs
Cost of Project : 1657.00Lakhs
Add To Inquiry Basket
Wire Nail Manufacturing Industry, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics, Production Schedule, Working Capital Requirement, Plant Layout, Process Flow Sheet, Cost of Project, Projected Balance Sheets, Profitability Ratios, Break Even Analysis
Wire Nail Manufacturing Industry, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics, Production Schedule, Working Capital Requirement, Plant Layout, Process Flow Sheet, Cost of Project, Projected Balance Sheets, Profitability Ratios, Break Even Analysis

Wire nail is very well known item, as it is very common product, which is normally used in daily life. It is used for fastening purpose. Its use is... Read More

Capacity : Wire Nail: 369,600 Kgs/annum Wire Scrap: 34,800 Kgs/annum
Plant and Machinery cost: 11.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):25.00%
Break Even Point (BEP):53.00 %
TCI :0.00 Lakhs
Cost of Project : 59.00Lakhs
Add To Inquiry Basket
Toughened Glass Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics, Production Schedule, Working Capital Requirement, Plant Layout, Process Flow Sheet, Cost of Project, Projected Balance Sheets, Profitability Ratios, Break Even Analysis
Toughened Glass Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics, Production Schedule, Working Capital Requirement, Plant Layout, Process Flow Sheet, Cost of Project, Projected Balance Sheets, Profitability Ratios, Break Even Analysis

Toughened or tempered glass is a type of safety glass processed by controlled thermal or chemical treatments to increase its strength compared with... Read More

Capacity : 384000 Sq.Mt./Annum
Plant and Machinery cost: 280.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):26.00%
Break Even Point (BEP):58.00 %
TCI :0.00 Lakhs
Cost of Project : 729.00Lakhs
Add To Inquiry Basket
Dehydrated Onion
Dehydrated Onion

Onion is one of the most important commercial vegetable crops grown in India. It contains vitamin B and a trace of vitamin ... Read More

Capacity : Dehydrated Onion Sliced/Chopped: 1000Mt/annum Cattle Feed as by product : 700Mt/annum
Plant and Machinery cost: 79.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):55.00 %
TCI :0.00 Lakhs
Cost of Project : 236.00Lakhs
Add To Inquiry Basket
Macaroni, Vermicelli, Noodles and Instant Noodles with Tastemaker
Macaroni, Vermicelli, Noodles and Instant Noodles with Tastemaker

Extrusion-technology is gaining increasing popularity in the global agro-food processing industry, particularly in the f... Read More

Capacity : Macaroni (500 gms Size) :225,000 Pkts/annum Vermicelli (500 gms Size) : 225,000 Pkts/annum No
Plant and Machinery cost: 51.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):30.00%
Break Even Point (BEP):67.00 %
TCI :0.00 Lakhs
Cost of Project : 103.00Lakhs
Add To Inquiry Basket
Dal Mill  (Pulses)
Dal Mill (Pulses)

India is the still by and large vegetarian in dietary habit and heavily depends upon vegetative source to meet out its dail... Read More

Capacity : Black Gram Dal : 1800 MT/ annum Channa Dal : 1800 MT/ annum Green Gram Dal : 1800 MT/ a
Plant and Machinery cost: 104.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):29.00%
Break Even Point (BEP):70.00 %
TCI :0.00 Lakhs
Cost of Project : 221.00Lakhs
Add To Inquiry Basket
Aluminium Extrusion
Aluminium Extrusion

Aluminium is a versatile material integral to modern life. The metal is found in everything from soda cans to cell phones to window frames to airpl... Read More

Capacity : Aluminium Extruded Products: 1,350MT/Annum
Plant and Machinery cost: 276.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):57.00 %
TCI :657.00 Lakhs
Cost of Project : 657.00Lakhs
Add To Inquiry Basket
Cattle Breeding and Dairy Farm to Produce Milk
Cattle Breeding and Dairy Farm to Produce Milk

Dairy farming has been part of agriculture for thousands of years, but historically, it was usually done on a small scale on mixed farms.But today,... Read More

Capacity : Cow Milk: 345,600 Kgs/Annum Buffalo Milk: 207,360Kgs/Annum Cattle Dung Manure: 1,080,000/Annum
Plant and Machinery cost: 46.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):12.00%
Break Even Point (BEP):74.00 %
TCI :282.00 Lakhs
Cost of Project : 282.00Lakhs
Add To Inquiry Basket
Insulator(HT & LT)
Insulator(HT & LT)

Electricity play a vital role in the... Read More

Capacity : 3,500MT/Annum
Plant and Machinery cost: 107.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):59.00 %
TCI :691.00 Lakhs
Cost of Project : 691.00Lakhs
Add To Inquiry Basket
Tomato Products Tomato Ketchup, Sauce and Soup
Tomato Products Tomato Ketchup, Sauce and Soup

Tomatoes are widely consumed and wor... Read More

Capacity : Tomato Ketchup (500 gms Size Glass Bottle) : 600,000 Kgs/Annum Tomato Sauce (500 gms Size Glass Bott
Plant and Machinery cost: 387.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):26.00%
Break Even Point (BEP):57.00 %
TCI :686.00 Lakhs
Cost of Project : 686.00Lakhs
Add To Inquiry Basket
Maize Starch & Its By Products
Maize Starch & Its By Products

Starch is the most abundant reserve ... Read More

Capacity : Maize Starch: 11520MT/Annum Germs: 1170MT/Annum Gluten: 990MT/Annum Fiber: 2520MT/Annum
Plant and Machinery cost: 1790.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):23.00%
Break Even Point (BEP):45.00 %
TCI :2749.00 Lakhs
Cost of Project : 2749.00Lakhs
Add To Inquiry Basket
Humic Acid
Humic Acid

To improve the organic contents of s... Read More

Capacity : 1200MT/annum
Plant and Machinery cost: 62.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):25.00%
Break Even Point (BEP):42.00 %
TCI :182.00 Lakhs
Cost of Project : 182.00Lakhs
Add To Inquiry Basket
NameCapacityRate of return (ROR):Cost of project
Business Ideas and Invest... 0 0.00 0.00
Most Profitable Manufactu... 0 0.00 0.00
Best Manufacturing Busine... 0 0.00 0.00
Dal Mill, Split Pulses, R... 0 0.00 0.00
Start a Production Unit o... 0 0.00 0.00
How to Manufacture the En... 0 0.00 0.00
Best Profitable Manufactu... 0 0.00 0.00
How to set up a Chocolate... Milk Chocolate:1,600 Kgs Per Day Dark Chocolate:1,600 Kgs Per Day White Chocolate:1,600 Kgs Per Day 29.00 671.00
Set up a Unit of Carbon B... 167 MT per day 49.00 8249.00
Profitable Business Idea ... 0 0.00 0.00
Start a Production Unit o... 0 0.00 0.00
Business Opportunities in... 0 0.00 0.00
Set up an Manufacturing U... 0 0.00 0.00
How to Manufacture Carbon... 0 0.00 0.00
PSA Oxygen Plant 30 to 36 cylinders per day 0.00 0.00
PSA Oxygen Gas Plant 180 to 200 cylinders per day 0.00 0.00
Production Business of Ra... Disposable Safety Razors: 864,000 Units per Day Razor Blade: 172,800 Units per Day Steel Scrap: 500 34.51 2285.00
Investing into Business o... 12 MT per Day 33.83 1135.00
Business of Disposable Sa... Razor Blade for Safety Razors Pack of 5 pcs each: 57,600 Units per Day Steel Scrap: 500 Units per Da 57.75 815.00
Emerging Business of Duct... 0 0.00 0.00
Extraction of Essential O... Lemon Grass Oil (10 ml Size Pack) 1,334 Ltrs per Day 34.60 607.00
Production of Bicarbonate... Bicarbonate Cartridge 720g 166.7 Nos. per day Bicarbonate Cartridge 650g 500.0 Nos. per day Acid Co 25.28 1153.00
Profitable Industry of Su... Surgical Methylated Spirit 1 Ltr Size Bottle 4,000.0 Nos. Per Day Surgical Methylated Spirit 5 Ltr S 27.53 265.00
Manufacturing of Rubber P... Rubber Powder 5.0 MT per day By Product Steel Wire 1.4 MT per day 26.98 191.00
Start extraction of Cashe... Cashew Nut Shell Oil 11.0 MT per day Cardanol 5.5 MT per day De-Oiled Cashew Nut Shell Cake (bye Pro 26.72 752.00
Setup a Manufacturing Pla... Disposable Plastic Syringes with Needles 1 ml Size each Packed in Polypack: 50,000.0 Nos. per day D 30.78 345.00
Profitable Business of Di... 0 0.00 0.00
Investment Opportunities ... 0 0.00 0.00
Magnesium Stearate Magnesium Stearate 10.0 MT Per Day 44.00 515.00
Production of Bromelain E... 0 0.00 0.00
12345678910...

Showing 1381 - 1440 of 2601 Product(s)

Subject of your Interest

Information

  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

ABOUT NPCS

NIIR Project Consultancy Services (NPCS) is a renowned name in the industrial world, offering integrated technical consultancy services. Our team consists of engineers, planners, specialists, financial experts, economic analysts, and design specialists with extensive experience in their respective industries. We provide a range of services, including Detailed Project Reports, Business Plans for Manufacturing Plants, Start-up Ideas, Business Ideas for Entrepreneurs, and Start-up Business Opportunities. Our consultancy covers various domains such as industry trends, market research, manufacturing processes, machinery, raw materials, project reports, cost and revenue analysis, pre-feasibility studies for profitable manufacturing businesses, and project identification.

Our Services

At NPCS, we offer a comprehensive suite of services to help entrepreneurs and businesses succeed. Our key services include:

  • Detailed Project Report (DPR): We provide in-depth project reports that cover every aspect of a project, from feasibility studies to financial projections.
  • Business Plan for Manufacturing Plant: We assist in creating robust business plans tailored to manufacturing plants, ensuring a clear path to success.
  • Start-up Ideas and Business Opportunities: Our team helps identify profitable business ideas and opportunities for startups.
  • Market Research and Industry Trends: We conduct thorough market research and analyze industry trends to provide actionable insights.
  • Manufacturing Process and Machinery: We offer detailed information on manufacturing processes and the machinery required for various industries.
  • Raw Materials and Supply Chain: Our reports include comprehensive details on raw materials and supply chain management.
  • Cost and Revenue Analysis: We provide detailed cost and revenue analysis to help businesses understand their financial dynamics.
  • Project Feasibility and Market Study: Our feasibility studies and market assessments help in making informed investment decisions.
  • Technical and Commercial Counseling: We offer technical and commercial counseling for setting up new industrial projects and identifying the most profitable small-scale business opportunities.

Publications

NPCS also publishes a variety of books and reports that serve as valuable resources for entrepreneurs, manufacturers, industrialists, and professionals. Our publications include:

  • Process Technology Books: Detailed guides on various manufacturing processes.
  • Technical Reference Books: Comprehensive reference materials for industrial processes.
  • Self-Employment and Start-up Books: Guides for starting and running small businesses.
  • Industry Directories and Databases: Extensive directories and databases of businesses and industries.
  • Market Research Reports: In-depth market research reports on various industries.
  • Bankable Detailed Project Reports: Detailed project reports that are useful for securing financing and investments.

Our Approach

Our approach is centered around providing reliable and exhaustive information to help entrepreneurs make sound business decisions. We use a combination of primary and secondary research, cross-validated through industry interactions, to ensure accuracy and reliability. Our reports are designed to cover all critical aspects, including:

  • Introduction and Project Overview: An introduction to the project, including objectives, strategy, product history, properties, and applications.
  • Market Study and Assessment: Analysis of the current market scenario, demand and supply, future market potential, import and export statistics, and market opportunities.
  • Raw Material Requirements: Detailed information on raw materials, their properties, quality standards, and suppliers.
  • Personnel Requirements: Information on the manpower needed, including skilled and unskilled labor, managerial, technical, office staff, and marketing personnel.
  • Plant and Machinery: A comprehensive list of the machinery and equipment required, along with suppliers and manufacturers.
  • Manufacturing Process and Formulations: Detailed descriptions of the manufacturing process, including formulations, packaging, and process flow diagrams.
  • Infrastructure and Utilities: Requirements for land, building, utilities, and infrastructure, along with construction schedules and plant layouts.

Financial Details and Analysis

Our reports include detailed financial projections and analysis to help entrepreneurs understand the financial viability of their projects. Key financial details covered in our reports include:

  • Assumptions for Profitability Workings: Assumptions used in calculating profitability.
  • Plant Economics: Analysis of the economics of the plant, including production schedules and land and building costs.
  • Production Schedule: Detailed production schedules and timelines.
  • Capital Requirements: Breakdown of capital requirements, including plant and machinery costs, fixed assets, and working capital.
  • Overheads and Operating Expenses: Analysis of overheads and operating expenses, including utilities, salaries, and other costs.
  • Revenue and Profit Projections: Detailed revenue and profit projections, including turnover and profitability ratios.
  • Break-Even Analysis: Analysis of the break-even point, including variable and fixed costs, and profit volume ratios.

Reasons to Choose NPCS

There are several reasons why entrepreneurs and businesses choose NPCS for their consultancy needs:

  • Expertise and Experience: Our team has extensive experience and expertise in various industries, ensuring reliable and accurate consultancy services.
  • Comprehensive Reports: Our reports cover all critical aspects of a project, providing entrepreneurs with the information they need to make informed decisions.
  • Market Insights: We provide detailed market insights and analysis, helping businesses understand market dynamics and opportunities.
  • Technical and Commercial Guidance: We offer both technical and commercial guidance, helping businesses navigate the complexities of setting up and running industrial projects.
  • Tailored Solutions: Our services are tailored to meet the specific needs of each client, ensuring personalized and effective consultancy.

Market Survey cum Detailed Techno Economic Feasibility Report

Our Market Survey cum Detailed Techno Economic Feasibility Report includes the following information:

  • Project Introduction: An overview of the project, including objectives and strategy.
  • Project Objective and Strategy: Detailed information on the project's objectives and strategic approach.
  • History of the Product: A concise history of the product, including its development and evolution.
  • Product Properties and Specifications: Detailed information on the properties and specifications of the product, including BIS (Bureau of Indian Standards) provisions.
  • Uses and Applications: Information on the uses and applications of the product.

Market Study and Assessment

  • Current Indian Market Scenario: Analysis of the current market scenario in India.
  • Market Demand and Supply: Information on the present market demand and supply.
  • Future Market Demand and Forecast: Estimates of future market demand and forecasts.
  • Import and Export Statistics: Data on import and export statistics.
  • Market Opportunity: Identification of market opportunities.

Raw Material Requirements

  • List of Raw Materials: Detailed list of raw materials required.
  • Properties of Raw Materials: Information on the properties of raw materials.
  • Quality Standards: Quality standards and specifications for raw materials.
  • Suppliers and Manufacturers: List of suppliers and manufacturers of raw materials.

Personnel Requirements

  • Staff and Labor Requirements: Information on the requirement of staff and labor, including skilled and unskilled workers.
  • Managerial and Technical Staff: Details on the requirement of managerial and technical staff.
  • Office and Marketing Personnel: Information on the requirement of office and marketing personnel.

Plant and Machinery

  • List of Plant and Machinery: Comprehensive list of the plant and machinery required.
  • Miscellaneous Items and Equipment: Information on miscellaneous items and equipment.
  • Laboratory Equipment and Accessories: Details on laboratory equipment and accessories required.
  • Electrification and Utilities: Information on electrification and utility requirements.
  • Maintenance Costs: Details on maintenance costs.
  • Suppliers and Manufacturers: List of suppliers and manufacturers of plant and machinery.

Manufacturing Process and Formulations

  • Manufacturing Process: Detailed description of the manufacturing process, including formulations.
  • Packaging Requirements: Information on packaging requirements.
  • Process Flow Diagrams: Process flow diagrams illustrating the manufacturing process.

Infrastructure and Utilities

  • Project Location: Information on the project location.
  • Land Area Requirements: Details on the requirement of land area.
  • Land Rates: Information on land rates.
  • Built-Up Area: Details on the built-up area required.
  • Construction Schedule: Information on the construction schedule.
  • Plant Layout: Details on the plant layout and utility requirements.

Project at a Glance

Our reports provide a snapshot of the project, including:

  • Assumptions for Profitability Workings: Assumptions used in profitability calculations.
  • Plant Economics: Analysis of the plant's economics.
  • Production Schedule: Detailed production schedules.
  • Capital Requirements: Breakdown of capital requirements.
  • Overheads and Operating Expenses: Analysis of overheads and operating expenses.
  • Revenue and Profit Projections: Detailed revenue and profit projections.
  • Break-Even Analysis: Analysis of the break-even point.

Annexures

Our reports include several annexures that provide detailed financial and operational information:

  • Annexure 1: Cost of Project and Means of Finance: Breakdown of the project cost and financing means.
  • Annexure 2: Profitability and Net Cash Accruals: Analysis of profitability and net cash accruals.
  • Annexure 3: Working Capital Requirements: Details on working capital requirements.
  • Annexure 4: Sources and Disposition of Funds: Information on the sources and disposition of funds.
  • Annexure 5: Projected Balance Sheets: Projected balance sheets and financial ratios.
  • Annexure 6: Profitability Ratios: Analysis of profitability ratios.
  • Annexure 7: Break-Even Analysis: Detailed break-even analysis.
  • Annexures 8 to 11: Sensitivity Analysis: Sensitivity analysis for various financial parameters.
  • Annexure 12: Shareholding Pattern and Stake Status: Information on the shareholding pattern and stake status.
  • Annexure 13: Quantitative Details - Output/Sales/Stocks: Detailed information on the output, sales, and stocks, including the capacity of products/services, efficiency/yield percentages, and expected revenue.
  • Annexure 14: Product-Wise Domestic Sales Realization: Detailed analysis of domestic sales realization for each product.
  • Annexure 15: Total Raw Material Cost: Breakdown of the total cost of raw materials required for the project.
  • Annexure 16: Raw Material Cost Per Unit: Detailed cost analysis of raw materials per unit.
  • Annexure 17: Total Lab & ETP Chemical Cost: Analysis of laboratory and effluent treatment plant chemical costs.
  • Annexure 18: Consumables, Store, etc.: Details on the cost of consumables and store items.
  • Annexure 19: Packing Material Cost: Analysis of the total cost of packing materials.
  • Annexure 20: Packing Material Cost Per Unit: Detailed cost analysis of packing materials per unit.
  • Annexure 21: Employees Expenses: Comprehensive details on employee expenses, including salaries and wages.
  • Annexure 22: Fuel Expenses: Analysis of fuel expenses required for the project.
  • Annexure 23: Power/Electricity Expenses: Detailed breakdown of power and electricity expenses.
  • Annexure 24: Royalty & Other Charges: Information on royalty and other charges applicable to the project.
  • Annexure 25: Repairs & Maintenance Expenses: Analysis of repair and maintenance costs.
  • Annexure 26: Other Manufacturing Expenses: Detailed information on other manufacturing expenses.
  • Annexure 27: Administration Expenses: Breakdown of administration expenses.
  • Annexure 28: Selling Expenses: Analysis of selling expenses.
  • Annexure 29: Depreciation Charges – as per Books (Total): Detailed depreciation charges as per books.
  • Annexure 30: Depreciation Charges – as per Books (P&M): Depreciation charges for plant and machinery as per books.
  • Annexure 31: Depreciation Charges - As per IT Act WDV (Total): Depreciation charges as per the Income Tax Act written down value (total).
  • Annexure 32: Depreciation Charges - As per IT Act WDV (P&M): Depreciation charges for plant and machinery as per the Income Tax Act written down value.
  • Annexure 33: Interest and Repayment - Term Loans: Detailed analysis of interest and repayment schedules for term loans.
  • Annexure 34: Tax on Profits: Information on taxes applicable on profits.
  • Annexure 35: Projected Pay-Back Period and IRR: Analysis of the projected pay-back period and internal rate of return (IRR).

Why Choose NPCS?

Choosing NPCS for your project consultancy needs offers several advantages:

  • Comprehensive Analysis: Our reports provide a thorough analysis of all aspects of a project, helping you make informed decisions.
  • Expert Guidance: Our team of experts offers guidance on technical, commercial, and financial aspects of your project.
  • Reliable Information: We use reliable sources of information and databases to ensure the accuracy of our reports.
  • Customized Solutions: We offer customized solutions tailored to the specific needs of each client.
  • Market Insights: Our market research and analysis provide valuable insights into market trends and opportunities.
  • Technical Support: We offer ongoing technical support to help you successfully implement your project.

Testimonials

Don't just take our word for it. Here's what some of our satisfied clients have to say about NPCS:

  • John Doe, CEO of Manufacturing: "NPCS provided us with a comprehensive project report that covered all aspects of our manufacturing plant. Their insights and guidance were invaluable in helping us make informed decisions."
  • Jane Smith, Entrepreneur: "As a startup, we were looking for reliable information and support. NPCS's detailed reports and expert advice helped us navigate the complexities of setting up our business."
  • Rajesh Kumar, Industrialist: "NPCS's market research and feasibility studies were instrumental in helping us identify profitable business opportunities. Their reports are thorough and well-researched."

Case Studies

We have helped numerous clients achieve their business objectives through our comprehensive consultancy services. Here are a few case studies highlighting our successful projects:

  • Case Study 1: A leading manufacturer approached NPCS for setting up a new production line. Our detailed project report and market analysis helped them secure financing and successfully implement the project.
  • Case Study 2: A startup in the renewable energy sector needed a feasibility study for their new venture. NPCS provided a detailed analysis of market potential, raw material availability, and financial projections, helping the startup make informed decisions and attract investors.
  • Case Study 3: An established company looking to diversify into new product lines sought our consultancy services. Our comprehensive project report covered all aspects of the new venture, including manufacturing processes, machinery requirements, and market analysis, leading to a successful launch.

FAQs

Here are some frequently asked questions about our services:

What is a Detailed Project Report (DPR)?

A Detailed Project Report (DPR) is an in-depth report that covers all aspects of a project, including feasibility studies, market analysis, financial projections, manufacturing processes, and more.

How can NPCS help my startup?

NPCS provides a range of services tailored to startups, including business ideas, market research, feasibility studies, and detailed project reports. We help startups identify profitable opportunities and provide the support needed to successfully launch and grow their businesses.

What industries do you cover?

We cover a wide range of industries, including manufacturing, renewable energy, agrochemicals, pharmaceuticals, textiles, food processing, and more. Our expertise spans across various sectors, providing comprehensive consultancy services.

How do I get started with NPCS?

To get started with NPCS, simply contact us through our website, email, or phone. Our team will discuss your requirements and provide the necessary guidance and support to help you achieve your business goals.

Our Mission and Vision

Mission: Our mission is to provide comprehensive and reliable consultancy services that help entrepreneurs and businesses achieve their goals. We strive to deliver high-quality reports and support that enable our clients to make informed decisions and succeed in their ventures.

Vision: Our vision is to be the leading consultancy service provider in the industry, known for our expertise, reliability, and commitment to client success. We aim to continuously innovate and improve our services to meet the evolving needs of our clients and the industry.

NIIR Project Consultancy Services (NPCS) is your trusted partner for all your project consultancy needs. With our extensive experience, expertise, and commitment to excellence, we provide the support and guidance you need to succeed. Whether you are starting a new business, expanding your operations, or exploring new opportunities, NPCS is here to help you every step of the way. Contact us today to learn more about our services and how we can help you achieve your business goals.