Tripura is a state in Northeast India. The third-smallest state in the country, it covers 10,491 km2 (4,051 sq mi) and is bordered by Bangladesh (East Bengal) to the north, south, and west, and the Indian states of Assam and Mizoram to the east. Tripura is a landlocked state in North East India. The state has a tropical savanna climate, designated Aw under the Köppen climate classification. The undulating topography leads to local variations, particularly in the hill ranges. The four main seasons are winter, from December to February; pre-monsoon or summer, from March to April; monsoon, from May to September; and post-monsoon, from October to November.

Tripura's gross state domestic product for 2010–11 was 129.47 billion (US$2.1 billion) at constant price (2004–05), recording 5.71 per cent growth over the previous year. In the same period, the GDP of India was 48778.42 billion (US$790 billion), with a growth rate of 8.55 per cent. Tripura is an agrarian state with more than half of the population dependent on agriculture and allied activities. However, due to hilly terrain and forest cover, only 27 per cent of the land is available for cultivation. Rice, the major crop of the state, is cultivated in 91 per cent of the cropped area.

TOURISM

Tripura has a geographical area of about 10,492 sq. km. almost two-thirds of the state is under hilly terrain and it is surrounded on three sides by the deltaic basin of Bangladesh. The Tripura tribal’s are divided into two groups: Puran Tripuras and Natun Tripuras. The Puran Tripuras are the original inhabitants of the State and constitute a little over 16% of the total and 57% of the tribal population of the State. The Department of Tourism, Govt. of India, under the ministry of Tourism and Culture has been providing liberal financial and technical support for the tourism development in the state based on the projects received from the states. It is quite clear that Tripura has tremendous and quite unique tourism potential. This could be tapped mainly through the concept of Eco-tourism and Heritage tourism. Nature / wildlife tourism, adventure tourism, rural tourism, leisure tourism, pilgrimage tourism, international border tourism could be some special tourist packages. The Tourism Development in the Northeast region will depend on integrated approach, involving various government departments, private entrepreneurs, voluntary organizations and local community. This approach will also help in evolving local people’s perception towards tourism development as a strong tool for socio-economic up liftment.

INDUSTRIAL SECTOR

The State Government offers a package of incentives for setting up of industrial units, which is comparable to other states. Besides, the special incentive package i.e. North East Industrial and Investment Promotion Policy (NEIIP) declared by the Government of India for the North East Region is available to industrial units.

State Package of Incentives under Tripura Industrial Investment Promotion Incentive Scheme-

•                    Capital Investment Subsidy @ 30% and additional subsidy @ 2.5% for enterprises of ST, SC, & women individuals on Fixed Capital Investment.

•                    Full Reimbursement of Standard Certification Fees /Charges / other expenses on account of obtaining a standard Certification.

•                    Provides State Transport Subsidy for covering the portion for which Central Transport Subsidy is not available

•                    85% Exemption from the payment of Earnest Money and Security Deposits on tenders floated by State Govt. Department / Agencies.

Incentives declared by Central Government:

•                    Exemption of Excise Duty on finished products.

•                    Central Transport Subsidy.

•                    Income Tax Benefit.

•                    Capital Investment Subsidy.

•                    Comprehensive Insurance Scheme for insurance coverage. Subsidies to service sector, bio-technology and power generating industries.

INVESTMENT OPPORTUNITIES

Tripura offers an investor-friendly environment. The Government welcomes investments into the State, from both domestic and foreign investors.

•        Natural gas

Tripura has vast reserves of natural gas in non-associate form. The gas is of high quality, with high methane content of up to 97%. The availability of superior quality natural gas, at concessional price, offers a great opportunity to prospective investors, to set up gas-based industrial units, using natural gas

•        Information Technology (IT)

Tripura has been considered the second best IT destination in the North East. IT sector (including IT-enabled services) has been identified as one of the major potential growth sectors by the state. The high literacy rate of the State provides additional advantage for development of the sector.

•        Food Processing

The State government has identified food processing as a major thrust area. There is a vast potential for setting up of food processing units in the State. The agro-climatic conditions in Tripura are ideally suited for production of a large variety of horticultural crops.

•        Handicrafts

From time immemorial, Tripura has carved out a name for itself in the field of handicrafts. The gifted artisans produce wonderful objects of crafts from simple material like cane, bamboo and wood.

•        Tourism

Tripura is an attractive tourist destination. The state has a rich cultural heritage. There are number of historical Hindu and Buddhist sites.


INDUSTRIAL POLICY

•        To improve Basic as well Industrial Infrastructure.

•        Industrial Growth by attracting Private Investment.

•        To improve investment climate towards better regulation by removing barriers to competition.

•        Creation of hassle-free and congenial investment climate.

•        To bring significant increase in the State Domestic Product.

•        Widening of resources base of the state.

•        Development of connectivity (Internal road, railways and air & telecom).

•        Better social infrastructure Enabling Entrepreneurship -building capacities through entrepreneurial and technical skills, training and promotion of self-employment.

THRUST AREAS

•        Natural Gas

•        Food Processing

•        Rubber

•        Tea

•        Handicraft

•        Bamboo

•        Handloom

•        Tourism

•        Information Technology

•        Education

  •           Healthcare

The Department of Industries & Commerce was established to promote Village and Small-scale industries as well as medium and large scale industries in the State. While efforts are being made to promote entrepreneurship within the State, the outside investors in the public and private sectors are also encouraged both for their financial capabilities and technical expertise, for the medium and large-scale units. The major existing industrial area is the Industrial Growth Centre Complex at Bodhjungnagar which also includes Food Park, Rubber Park and Export Promotion Industrial Park. The other industrial sites near Agartala as the main business and industrial centres are Dukli, Arundhatinagar and Badharghat. The mineral resources are minor amounts of glass sands, limestone, plastic clay and hard rock and all of these materials are being used in varying degrees. Setting up of ceramic tiles unit and other mineral based industries are being encouraged in the private sector.


We can provide you detailed project reports on the following topics. Please select the projects of your interests.
Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the ost of raw material, formulating the cash flow statement, projecting the balance sheet etc.
We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics. Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.


We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Add multiple items to inquiry

Select the items and then press Add to inquiry button

Sort by :
Dal Mill  (Pulses)
Dal Mill (Pulses)

India is the still by and large vegetarian in dietary habit and heavily depends upon vegetative source to meet out its dail... Read More

Capacity : Black Gram Dal : 1800 MT/ annum Channa Dal : 1800 MT/ annum Green Gram Dal : 1800 MT/ a
Plant and Machinery cost: 104.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):29.00%
Break Even Point (BEP):70.00 %
TCI :0.00 Lakhs
Cost of Project : 221.00Lakhs
Add To Inquiry Basket
Composite Cans from Paper Tube
Composite Cans from Paper Tube

Composite can is composed of a can body; - a top closure; and - a bottom closure. It is also sometimes called a Combi container. It has a con... Read More

Capacity : 12,000,000/Annum
Plant and Machinery cost: 39.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):30.00%
Break Even Point (BEP):52.00 %
TCI :0.00 Lakhs
Cost of Project : 222.00Lakhs
Add To Inquiry Basket
Carbon Fiber Composites
Carbon Fiber Composites

A Carbon Fiber is a fibrous carbon material having a micro graphite crystal structure made by fibrillation of Acrylic resin... Read More

Capacity : 300,000 Kgs/Annum
Plant and Machinery cost: 111.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):61.00 %
TCI :0.00 Lakhs
Cost of Project : 451.00Lakhs
Add To Inquiry Basket
Paper Cups, Plates and Boxes
Paper Cups, Plates and Boxes

Paper cups and glasses are made in a variety of sizes and shapes according to the amount of material to be filled. They are... Read More

Capacity : Paper Cups : 18,720,00 Pcs/annum Paper Plates : 21,600,000 Pcs/annum Corrugated Boxes : 1
Plant and Machinery cost: 46.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):30.00%
Break Even Point (BEP):52.00 %
TCI :0.00 Lakhs
Cost of Project : 292.00Lakhs
Add To Inquiry Basket
Button Mushroom Cultivation
Button Mushroom Cultivation

Button Mushroom is the most popular mushroom variety grown and consumed the world over. In India, its production earlier ... Read More

Capacity : 150,000 Kgs/annum
Plant and Machinery cost: 86.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):28.00%
Break Even Point (BEP):49.00 %
TCI :0.00 Lakhs
Cost of Project : 164.00Lakhs
Add To Inquiry Basket
Sterile Water for Injection with BFS Technology
Sterile Water for Injection with BFS Technology

The objective of formulating and compounding sterile preparations is to provide adosage form of a labeled drug, in the st... Read More

Capacity : Ampoules 5 ml Size : 300,000 Th. Nos. /annum Ampoules 10 ml Size : 260,000 Th. Nos. /ann
Plant and Machinery cost: 607.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):28.00%
Break Even Point (BEP):55.00 %
TCI :0.00 Lakhs
Cost of Project : 917.00Lakhs
Add To Inquiry Basket
Bricks from Fly Ash
Bricks from Fly Ash

Fly Ash brick is a product of basic cement clinker materials i.e. fly ash, stone dust/sand, lime, gypsum and bonding agent.... Read More

Capacity : 24,000,000 Pcs/annum
Plant and Machinery cost: 152.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):28.00%
Break Even Point (BEP):46.00 %
TCI :0.00 Lakhs
Cost of Project : 336.00Lakhs
Add To Inquiry Basket
Detergent Cake & Powder
Detergent Cake & Powder

Detergents are defined as complete washing or cleaning products, which contain among their ingredients an organic surface-active ... Read More

Capacity : Detergent Cake :180,000 Kgs/annum Detergent Powder :180,000 Kgs/annum
Plant and Machinery cost: 15.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):76.00 %
TCI :0.00 Lakhs
Cost of Project : 36.00Lakhs
Add To Inquiry Basket
Aluminium Extrusion
Aluminium Extrusion

Aluminium is a versatile material integral to modern life. The metal is found in everything from soda cans to cell phones to window frames to airpl... Read More

Capacity : Aluminium Extruded Products: 1,350MT/Annum
Plant and Machinery cost: 276.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):57.00 %
TCI :657.00 Lakhs
Cost of Project : 657.00Lakhs
Add To Inquiry Basket
Cattle Breeding and Dairy Farm to Produce Milk
Cattle Breeding and Dairy Farm to Produce Milk

Dairy farming has been part of agriculture for thousands of years, but historically, it was usually done on a small scale on mixed farms.But today,... Read More

Capacity : Cow Milk: 345,600 Kgs/Annum Buffalo Milk: 207,360Kgs/Annum Cattle Dung Manure: 1,080,000/Annum
Plant and Machinery cost: 46.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):12.00%
Break Even Point (BEP):74.00 %
TCI :282.00 Lakhs
Cost of Project : 282.00Lakhs
Add To Inquiry Basket
Insulator(HT & LT)
Insulator(HT & LT)

Electricity play a vital role in the... Read More

Capacity : 3,500MT/Annum
Plant and Machinery cost: 107.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):59.00 %
TCI :691.00 Lakhs
Cost of Project : 691.00Lakhs
Add To Inquiry Basket
Tomato Products Tomato Ketchup, Sauce and Soup
Tomato Products Tomato Ketchup, Sauce and Soup

Tomatoes are widely consumed and wor... Read More

Capacity : Tomato Ketchup (500 gms Size Glass Bottle) : 600,000 Kgs/Annum Tomato Sauce (500 gms Size Glass Bott
Plant and Machinery cost: 387.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):26.00%
Break Even Point (BEP):57.00 %
TCI :686.00 Lakhs
Cost of Project : 686.00Lakhs
Add To Inquiry Basket
Maize Starch & Its By Products
Maize Starch & Its By Products

Starch is the most abundant reserve ... Read More

Capacity : Maize Starch: 11520MT/Annum Germs: 1170MT/Annum Gluten: 990MT/Annum Fiber: 2520MT/Annum
Plant and Machinery cost: 1790.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):23.00%
Break Even Point (BEP):45.00 %
TCI :2749.00 Lakhs
Cost of Project : 2749.00Lakhs
Add To Inquiry Basket
Humic Acid
Humic Acid

To improve the organic contents of s... Read More

Capacity : 1200MT/annum
Plant and Machinery cost: 62.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):25.00%
Break Even Point (BEP):42.00 %
TCI :182.00 Lakhs
Cost of Project : 182.00Lakhs
Add To Inquiry Basket
Super Speciality Hospital
Super Speciality Hospital

The Indian healthcare industry is divided into two segments - services and manufacturing. While the manufacturing segment consists of medical equip... Read More

Capacity : Gereral Ward Room: 23400 patients/annum Double Bed Room: 27000 patients/annum Single Bed Room: 9000
Plant and Machinery cost: 5289.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):2.69%
Break Even Point (BEP):23.00 %
TCI :0.00 Lakhs
Cost of Project : 29196.00Lakhs
Add To Inquiry Basket
Engineering College (Aeronautical)
Engineering College (Aeronautical)

Engineering education is the activity of teaching knowledge and principles related to the professional practice of engineering. It includes the ini... Read More

Capacity : Aeronautical Engineering: 60 students/annum Mechanical Engineering: 60 students/annum Civil Engineer
Plant and Machinery cost: 623.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):93.00 %
TCI :0.00 Lakhs
Cost of Project : 3336.00Lakhs
Add To Inquiry Basket
Spices and Masala  Grinding, Blending and Packing
Spices and Masala Grinding, Blending and Packing

Spices are non-leafy parts (e.g. bud, fruit, seed, bark, rhizome, and bulb) of plants used as a flavoring or seasoning, alt... Read More

Capacity : 400,000 Kgs/annum
Plant and Machinery cost: 91.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):32.00%
Break Even Point (BEP):39.00 %
TCI :0.00 Lakhs
Cost of Project : 1004.00Lakhs
Add To Inquiry Basket
Mini Aerodrome
Mini Aerodrome

An aerodrome or airdrome is a location from which aircraft flight operations take place, regardless of whether they involve... Read More

Capacity : Flight Landing Charges : 4,320 Nos./annum Annually Lease Charages of Shops (20 Nos.) : 12 Nos./a
Plant and Machinery cost: 442.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 6777.00Lakhs
Add To Inquiry Basket
Peanut Butter
Peanut Butter

Peanut butter is a food paste made from ground nut or peanut. It consists essentially of cleaned, graded, blanched, roas... Read More

Capacity : 2,400,000 Kg/annum
Plant and Machinery cost: 126.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):29.00%
Break Even Point (BEP):53.00 %
TCI :0.00 Lakhs
Cost of Project : 561.00Lakhs
Add To Inquiry Basket
Paper Napkins, Toilet Paper Rolls & Facial Tissues
Paper Napkins, Toilet Paper Rolls & Facial Tissues

The tissues paper sector has boomed over the last few years. With a move to more luxurious tissue paper and ultra-absorbent... Read More

Capacity : Toilet Paper Rolls : 7,200,000 Nos./annum Paper Napkin (100 Pcs.): 558,000 Nos./annum Facial Tissue
Plant and Machinery cost: 59.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):29.00%
Break Even Point (BEP):41.00 %
TCI :0.00 Lakhs
Cost of Project : 341.00Lakhs
Add To Inquiry Basket
ERW Pipes (Black)
ERW Pipes (Black)

Electric Resistance Welded (ERW) steel pipes and tubes are used in various engineering purposes, fencing, scaffolding, line... Read More

Capacity : 18000MT/Annum
Plant and Machinery cost: 1637.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):28.00%
Break Even Point (BEP):60.00 %
TCI :0.00 Lakhs
Cost of Project : 3129.00Lakhs
Add To Inquiry Basket
Glass Sheet
Glass Sheet

It is difficult to conceive the cont... Read More

Capacity : Glass Sheet: 1000500 Sq.Mt/annum
Plant and Machinery cost: 919.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):14.00%
Break Even Point (BEP):60.00 %
TCI :1742.00 Lakhs
Cost of Project : 1742.00Lakhs
Add To Inquiry Basket
Thermocol Cups, Plates & Glasses
Thermocol Cups, Plates & Glasses

Read More

Capacity : Thermocol Cups: 108,000 Th.Pcs/Annum Thermocol Glasses: 108,000 Th.Pcs/Annum Thermocol Plates: 21,60
Plant and Machinery cost: 69.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):28.00%
Break Even Point (BEP):59.00 %
TCI :211.00 Lakhs
Cost of Project : 211.00Lakhs
Add To Inquiry Basket
Toughened Glass
Toughened Glass

It is difficult to conceive the conte... Read More

Capacity : 384000 Sq.Mt./Annum
Plant and Machinery cost: 280.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):26.00%
Break Even Point (BEP):58.00 %
TCI :729.00 Lakhs
Cost of Project : 729.00Lakhs
Add To Inquiry Basket
Thermocol Plates, Cups, Bowls and Glasses
Thermocol Plates, Cups, Bowls and Glasses

 

Read More

Capacity : Thermocol Cups: 30,000 Th.Pcs/Annum Thermocol Glasses : 30,000 Th.Pcs/Annum Thermocol Plates: 100000
Plant and Machinery cost: 461.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):26.00%
Break Even Point (BEP):51.00 %
TCI :717.00 Lakhs
Cost of Project : 717.00Lakhs
Add To Inquiry Basket
Solar Panel Assembling & Solar Power Inverter On Grid, Off Grid with Solar Pump Controller
Solar Panel Assembling & Solar Power Inverter On Grid, Off Grid with Solar Pump Controller

A solar cell, sometimes called a pho... Read More

Capacity : Poly Crystaline Solar PV Modules (10, 20, 50,100 & 300 Watt): 74,00,000 Nos per annum Solar Inverte
Plant and Machinery cost: 2162.88 Lakhs
Working Capital : 0.00
Rate of Return (ROR):36.00%
Break Even Point (BEP):31.00 %
TCI :21918.00 Lakhs
Cost of Project : 21918.00Lakhs
Add To Inquiry Basket
Atta Chakki
Atta Chakki

Atta is an Indian ... Read More

Capacity : Whole Wheat Flour : 30,000 MT/annum Wheat Bran (by product): 6000 MT/annum
Plant and Machinery cost: 169.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):55.00 %
TCI :521.00 Lakhs
Cost of Project : 521.00Lakhs
Add To Inquiry Basket
Beer Plant
Beer Plant

Beer is the world's oldest beverage, possibly dating back to the 6th millennium BC. It is also the most widely consumed alcoholic beverage and the ... Read More

Capacity : Beer (650 ml size Bottle):10,000 Litres/Day
Plant and Machinery cost: 306.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):55.00 %
TCI :1055.00 Lakhs
Cost of Project : 1055.00Lakhs
Add To Inquiry Basket
Aluminium Foil
Aluminium Foil

Aluminium plays a major role in the modern world through its innumerable forms of applications- from kitchen ware to electric conductors and from r... Read More

Capacity : 6 MT/Day
Plant and Machinery cost: 312.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):28.00%
Break Even Point (BEP):58.00 %
TCI :0.00 Lakhs
Cost of Project : 312.00Lakhs
Add To Inquiry Basket
Helmet Manufacturing
Helmet Manufacturing

A helmet is a form of protective gear worn to protect the head from injuries. The primary goal of a motorcycle helmet is motorcycle safety-to prote... Read More

Capacity : 500 Nos/day
Plant and Machinery cost: 57.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):28.00%
Break Even Point (BEP):54.00 %
TCI :326.00 Lakhs
Cost of Project : 326.00Lakhs
Add To Inquiry Basket
Bicycle Tyres & Tubes from Natural Rubber
Bicycle Tyres & Tubes from Natural Rubber

Cycling is amongst the most sustaina... Read More

Capacity : Bicycle Tyres : 450000 Pcs/annum Bicycle Tubes : 450000 Pcs/annum
Plant and Machinery cost: 405.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):26.00%
Break Even Point (BEP):52.00 %
TCI :646.00 Lakhs
Cost of Project : 646.00Lakhs
Add To Inquiry Basket
Ayurvedic Churna & Tablets (Ayurvedic herbal powder combinations)
Ayurvedic Churna & Tablets (Ayurvedic herbal powder combinations)

Ayurvedic medicine is a traditional type of medicine. It is now being recognized all over the world as one of the best type of medicine. It was ing... Read More

Capacity : Gastritis Sugar Coated Tablets :1000 Bottles/Day •Liver Tablets :1000 Bottles/Day •Panchsakara Churn
Plant and Machinery cost: 91.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):30.83%
Break Even Point (BEP):44.75 %
TCI :354.00 Lakhs
Cost of Project : 354.00Lakhs
Add To Inquiry Basket
Wooden Pencils
Wooden Pencils

A pencil is lead material enclosed in wood or put in metal holder used for drawing or writing. Pencil is a valuable item used by all levels of scho... Read More

Capacity : Wooden Pencils 200 Gross/Day
Plant and Machinery cost: 31.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):24.60%
Break Even Point (BEP):71.87 %
TCI :55.00 Lakhs
Cost of Project : 55.00Lakhs
Add To Inquiry Basket
MACARONI, VERMICELLI & ATTA NOODLES
MACARONI, VERMICELLI & ATTA NOODLES

Macaroni are made from wheat flour, carbonic salt water, pure salt, soft water and other additives. Carbonic salt water with sodium or potassium ca... Read More

Capacity : Macaroni :1MT/Day •Vermicelli : 1MT/Day •Atta Noodles: 1MT/Day
Plant and Machinery cost: 33.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):45.00%
Break Even Point (BEP):39.00 %
TCI :151.00 Lakhs
Cost of Project : 151.00Lakhs
Add To Inquiry Basket
Melamine
Melamine

Melamine is an organic compound that is often combined with formaldehyde to produce melamine resin, a syntheti... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):1.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Precipitated Silica from Rice Husk Ash
Precipitated Silica from Rice Husk Ash

Rice husk is an agricultural residue easily available in rice producing countries. India is a major rice producing country, and the husk generated ... Read More

Capacity : Precipitated Silica:10 MT/Day • CaCO3 (by product):20.6 MT/Day
Plant and Machinery cost: 864.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):25.00%
Break Even Point (BEP):50.00 %
TCI :1255.00 Lakhs
Cost of Project : 1255.00Lakhs
Add To Inquiry Basket
Micronutrients Fertilizer for Banana, Vegetables and Citrus
Micronutrients Fertilizer for Banana, Vegetables and Citrus

Micronutrients are elements which are essential for plant growth, but are required in much smaller amounts than those of the primary nutrients; nit... Read More

Capacity : Micronutrients Fertilizer for Banana:500 Kgs/Day •Micronutrients Fertilizer for Vegetables:500 Kgs/D
Plant and Machinery cost: 7.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):30.00%
Break Even Point (BEP):72.00 %
TCI :30.00 Lakhs
Cost of Project : 30.00Lakhs
Add To Inquiry Basket
Production Unit of Liquid Washing Soap, Perfumed Bleach for the Wash of White Cloths, Toilet  Tills Hard Stains Remover Liquid , Detergent Powder
Production Unit of Liquid Washing Soap, Perfumed Bleach for the Wash of White Cloths, Toilet Tills Hard Stains Remover Liquid , Detergent Powder

Production Unit of Liquid Washing Soap, Perfumed Bleach for the Wash of White Cloths, Toi... Read More

Capacity : Detergent Powder:3.2 MT/day•Liquid Washing Soap:3.2 MT/day •Toilet Cleaner:3.2 MT/day •Perfumed Blea
Plant and Machinery cost: 72.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):28.00%
Break Even Point (BEP):74.00 %
TCI :210.00 Lakhs
Cost of Project : 210.00Lakhs
Add To Inquiry Basket
Bicycle Manufacturing
Bicycle Manufacturing

A bicycle, is a human-powered, pedal-driven, single-track vehicle, having two wheels attached to a frame, one behind the other. A bicycle rider is ... Read More

Capacity : Bicycles (Different Sizes):2000 Nos./Day
Plant and Machinery cost: 270.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):26.39%
Break Even Point (BEP):31.24 %
TCI :3972.00 Lakhs
Cost of Project : 3972.00Lakhs
Add To Inquiry Basket
Pulp and Paper from Bamboo
Pulp and Paper from Bamboo

Paper is a major product of the forestry industry, and is used widely in our society. Paper products are used not only in their obvious application... Read More

Capacity : Writing Paper:100MT/Day
Plant and Machinery cost: 5457.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):26.62%
Break Even Point (BEP):54.00 %
TCI :8300.00 Lakhs
Cost of Project : 8300.00Lakhs
Add To Inquiry Basket
Cyanoacetic Acid
Cyanoacetic Acid

Cyanoacetic acid is an organic compound. It is a white, hygroscopic solid. The compound contains two functional groups, a nitrile and a carboxylic ... Read More

Capacity : 2.4 MT/Day
Plant and Machinery cost: 58.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.49%
Break Even Point (BEP):48.41 %
TCI :268.00 Lakhs
Cost of Project : 268.00Lakhs
Add To Inquiry Basket
Naphthalene Balls
Naphthalene Balls

Naphthalene is the single most abundant component of coal tar. Although the composition of coal tar varies with the coal from which it is produced,... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Resin Bonded Diamond Wheels
Resin Bonded Diamond Wheels

The resin bond diamond wheels are mainly used for grinding tungsten carbide and non-metal materials. Various kinds of dimensions and shapes are ava... Read More

Capacity : Resin Bonded Diamond Wheels:4000 Nos/Day
Plant and Machinery cost: 92.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):28.85%
Break Even Point (BEP):57.77 %
TCI :871.00 Lakhs
Cost of Project : 871.00Lakhs
Add To Inquiry Basket
uPVC Profiles for Doors and Windows
uPVC Profiles for Doors and Windows

uPVC products are fire retardant. This is because they contain more than 70 % unplasticised uPVC which turns 57% Chlorine. This contribute efficien... Read More

Capacity : 8.3 MT/Day
Plant and Machinery cost: 161.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):26.00%
Break Even Point (BEP):41.00 %
TCI :1119.00 Lakhs
Cost of Project : 1119.00Lakhs
Add To Inquiry Basket
Detergent Cake
Detergent Cake

Detergents are defined as complete washing or cleaning products, which contain among their ingredients an organic surface-active compound (Surfacta... Read More

Capacity : 4MT/Day
Plant and Machinery cost: 18.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):26.00%
Break Even Point (BEP):43.00 %
TCI :228.00 Lakhs
Cost of Project : 228.00Lakhs
Add To Inquiry Basket
Silica from Rice Husk
Silica from Rice Husk

Rice husk is an agricultural residue easily available in rice producing countries. India is a major rice producing country, and the husk generated ... Read More

Capacity : Precipitated Silica:10MT/Day •CaCO3 (by product):20.6MT/Day
Plant and Machinery cost: 864.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):25.00%
Break Even Point (BEP):50.00 %
TCI :1255.00 Lakhs
Cost of Project : 1255.00Lakhs
Add To Inquiry Basket
Solar Power Plant
Solar Power Plant

Renewable energy in India comes under the purview of the Ministry of New and Renewable Energy. India was the first country in the world to set up a... Read More

Capacity : Solar Power 10 MW: 60,000 KWH/ Day
Plant and Machinery cost: 5512.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):5.68%
Break Even Point (BEP):53.14 %
TCI :8447.00 Lakhs
Cost of Project : 8447.00Lakhs
Add To Inquiry Basket
Rice Mill(Parboiled Rice)
Rice Mill(Parboiled Rice)

Parboiled rice, popularly known as “ushna” rice in boiled form. India contributes about one-third of the world acreage under rice. Rice... Read More

Capacity : Parboiled Rice :80 MT/Day •Broken Rice:6 MT/Day •Rice Bran by product:6 MT/Day •Rice Husk by product
Plant and Machinery cost: 677.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):26.00%
Break Even Point (BEP):49.00 %
TCI :1290.00 Lakhs
Cost of Project : 1290.00Lakhs
Add To Inquiry Basket
Automatic Packaged Drinking Water
Automatic Packaged Drinking Water

It is needless to mention that water, a compound of Hydrogen and Oxygen is a precious natural gift which is very essential for survival of mankind ... Read More

Capacity : Packaged Drinking Water (1 Ltr. Size):120000
Plant and Machinery cost: 65.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):28.00%
Break Even Point (BEP):60.00 %
TCI :268.00 Lakhs
Cost of Project : 268.00Lakhs
Add To Inquiry Basket
High Tensile Fasteners
High Tensile Fasteners

Industrial fasteners have a vital contribution for the growth of almost all sectors of industry. It is a wonderful manifestation which joins & ... Read More

Capacity : Mild Steel/HT Bolts :25 MT/Day •Mild Steel/HT Nuts :5MT/Day
Plant and Machinery cost: 93.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):28.41%
Break Even Point (BEP):68.00 %
TCI :430.00 Lakhs
Cost of Project : 430.00Lakhs
Add To Inquiry Basket
Cold Rolled Sheet Mill
Cold Rolled Sheet Mill

Cold Rolled Coils and Sheets are produced through the cutting-edge Cold Rolling Mill. The Cold Rolling Mills are used for pressing the alloy steel ... Read More

Capacity : CRC Sheet :150 MT/Day Galvanised Plane Sheet:66 MT/Day •Galvanised Corrugated Sheet :66 MT/Day •
Plant and Machinery cost: 1437.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):26.75%
Break Even Point (BEP):50.68 %
TCI :3833.00 Lakhs
Cost of Project : 3833.00Lakhs
Add To Inquiry Basket
Dragon Fruits Farming
Dragon Fruits Farming

A pitaya or pitahaya is the fruit of several cactus species. "Pitaya" usually refers to fruit of the genus Stenocereus, while "pitahaya" or "dragon... Read More

Capacity : 360 Kgs/Day
Plant and Machinery cost: 30.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):22.29%
Break Even Point (BEP):20.47 %
TCI :543.00 Lakhs
Cost of Project : 543.00Lakhs
Add To Inquiry Basket
Stevia Farming
Stevia Farming

The Stevia plant belongs to the Compositae (sunflower family of plants). Centuries ago, Natives of Paraguay used the leaves of this small, herbaceo... Read More

Capacity : 27 Kgs/Day
Plant and Machinery cost: 29.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):25.17%
Break Even Point (BEP):53.74 %
TCI :60.00 Lakhs
Cost of Project : 60.00Lakhs
Add To Inquiry Basket
Socks Manufacturing
Socks Manufacturing

A sock is an item of clothing worn o... Read More

Capacity : Cotton Socks:600 Doz Pairs/Day Nylon Socks:400 Doz Pairs/Day
Plant and Machinery cost: 255.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):25.43%
Break Even Point (BEP):55.18 %
TCI :440.00 Lakhs
Cost of Project : 440.00Lakhs
Add To Inquiry Basket
Instant Noodles
Instant Noodles

Many fast food items have flooded the markets but noodles have emerged as the most popular item as it is cheaper, very easy to make and nutritious.... Read More

Capacity : Instant Noodles (75 gms Pouches):5000 Kgs/Day
Plant and Machinery cost: 125.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):25.83%
Break Even Point (BEP):54.21 %
TCI :386.00 Lakhs
Cost of Project : 386.00Lakhs
Add To Inquiry Basket
AAC Blocks from Silica Sand & Lime Stone Powder
AAC Blocks from Silica Sand & Lime Stone Powder

A.A.C. Blocks from Silica Sand & Lime Stone Powder

Read More
Capacity : 500 Cu. Mt/Day
Plant and Machinery cost: 542.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):26.36%
Break Even Point (BEP):50.87 %
TCI :1187.00 Lakhs
Cost of Project : 1187.00Lakhs
Add To Inquiry Basket
Surgical Blade & Disposable Scalpel
Surgical Blade & Disposable Scalpel

A scalpel is a small but extremely sharp knife used for surgery, anatomical dissection, and various arts and crafts. Scalpels may be disposable or ... Read More

Capacity : 40000 Pcs/Day
Plant and Machinery cost: 140.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):30.00%
Break Even Point (BEP):60.00 %
TCI :210.00 Lakhs
Cost of Project : 210.00Lakhs
Add To Inquiry Basket
Surgical Blade & Disposable Scalpel
Surgical Blade & Disposable Scalpel

A scalpel is a small but extremely sharp knife used for surgery, anatomical dissection, and various arts and crafts. Scalpels may be disposable or ... Read More

Capacity : 80000 Pcs/Day
Plant and Machinery cost: 190.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):38.50%
Break Even Point (BEP):50.00 %
TCI :320.00 Lakhs
Cost of Project : 320.00Lakhs
Add To Inquiry Basket
Integrated Unit RMC with Stone Crusher
Integrated Unit RMC with Stone Crusher

Concrete is most vital material in modern construction. It has versatile properties like easy mouldability, high compressive strength and long last... Read More

Capacity : Ready Mix Concrete : 62.5 Cu Mt/Day •Stone Crusher:62.5 Cu Mt/Day
Plant and Machinery cost: 234.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):24.39%
Break Even Point (BEP):52.00 %
TCI :762.00 Lakhs
Cost of Project : 762.00Lakhs
Add To Inquiry Basket
Cement Plant
Cement Plant

Cement is a material with adhesive and cohesive properties which make it capable of bonding minerals fragments into a compact whole. It can be defi... Read More

Capacity : 200 MT/Day
Plant and Machinery cost: 755.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):17.22%
Break Even Point (BEP):61.78 %
TCI :1254.00 Lakhs
Cost of Project : 1254.00Lakhs
Add To Inquiry Basket
NameCapacityRate of return (ROR):Cost of project
Golf Course 20000 MEMBERS 26.00 2100.00
Pharmaceutical College (B... B. Pharma 100 Student, D. Pharma 150 Student 0.00 396.43
A Business Plan For Sanit... Sanitary Napkins 4,800 PKTS per day 27.00 84.00
Start Manufacturing Of Bl... - 32.00 985.00
Start Production Of Potat... Potato Flakes 2 MT Per Day 25.00 563.00
Setup Manufacturing Unit ... Saddle 7,000 Unit Per Day Pedals 10,000 Unit Per Day 31.00 575.00
Opportunity in Sodium Sul... Sodium Sulfide Flakes 10,000 MT Per Annum 30.00 1426.00
Business Plan for Lithium... - 29.00 812.00
Start Manufacturing Busin... Cargo Containers (Size 20 Feet) 34 Nos Per Day 29.00 1992.00
Start Cutting and Grindin... Cutting Disc Size: (115 mm x 1 mm) 2,000 Pcs Pr Day Grinding Disc (115 mm x 6 mm) 2,000 Pcs Pr Day 28.00 423.00
Mink Blankets Production - 27.00 6000.00
A Business Plan for Micro... Micronutrient Fortified Energy Dense Food 100 MT Per Day 28.00 3500.00
Start Business of Caustic... - 25.00 56500.00
Start Crumb Rubber Powder... Crumb Rubber Powder 10 MT Per Day By Product Steel Wire 2 MT Per Day 26.00 303.00
Start Rice Milling Plant - 28.00 824.00
Start Manufacturing of Wo... Wooden Pencils 69,444 Gross Per Day 28.00 2400.00
A Business Plan for Monoc... Monocrystalline Silicon Ingots 400 Kgs Per Day 28.00 555.00
A Business Plan for Fiber... Fiberglass Tape 24,000 Mtrs. Per Day 28.00 442.00
Ferrochrome Manufacturing... Ferrochrome 135 MT Per Day 10.00 40400.00
Start a Business Of LPG C... LPG Cylinders (14.20 Kgs Size) 3,334.0 Nos. per day LPG Cylinders (19 Kgs Size) 3,334.0 Nos. per day 32.00 3475.00
Start Banana Wine Product... Banana Wine (750 ml size Bollte) 2,960 Bottles per day 25.00 1189.00
Activated Carbon From Ric... Activated Carbon 2,000 Kg Per Day 25.00 606.00
Set Up Activated Carbon F... Activated Carbon 2,000 Kg Per Day 25.00 606.00
Set Up Business of Flat G... 0 0.00 0.00
Set Up Business of Double... 0 0.00 0.00
A Business Plan for Bio-D... 10,000 MT Per Annum 28.00 8100.00
Sulphur Powder Manufactur... 20,000 MT Per Annum 24.00 4318.00
Manufacturing Business Gi... 60,000 Kg. Per Annum , 1,44,000 Kg. Per Annum 28.00 528.00
Start a Business of Manuf... 1,500 Dz. Per Annum 35.00 34.00
Start Activated Carbon fr... 0 0.00 0.00
12345678910...
« Back21 22 23 24 25Next »

Showing 1441 - 1500 of 2601 Product(s)

Subject of your Interest

Information

  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

ABOUT NPCS

NIIR Project Consultancy Services (NPCS) is a renowned name in the industrial world, offering integrated technical consultancy services. Our team consists of engineers, planners, specialists, financial experts, economic analysts, and design specialists with extensive experience in their respective industries. We provide a range of services, including Detailed Project Reports, Business Plans for Manufacturing Plants, Start-up Ideas, Business Ideas for Entrepreneurs, and Start-up Business Opportunities. Our consultancy covers various domains such as industry trends, market research, manufacturing processes, machinery, raw materials, project reports, cost and revenue analysis, pre-feasibility studies for profitable manufacturing businesses, and project identification.

Our Services

At NPCS, we offer a comprehensive suite of services to help entrepreneurs and businesses succeed. Our key services include:

  • Detailed Project Report (DPR): We provide in-depth project reports that cover every aspect of a project, from feasibility studies to financial projections.
  • Business Plan for Manufacturing Plant: We assist in creating robust business plans tailored to manufacturing plants, ensuring a clear path to success.
  • Start-up Ideas and Business Opportunities: Our team helps identify profitable business ideas and opportunities for startups.
  • Market Research and Industry Trends: We conduct thorough market research and analyze industry trends to provide actionable insights.
  • Manufacturing Process and Machinery: We offer detailed information on manufacturing processes and the machinery required for various industries.
  • Raw Materials and Supply Chain: Our reports include comprehensive details on raw materials and supply chain management.
  • Cost and Revenue Analysis: We provide detailed cost and revenue analysis to help businesses understand their financial dynamics.
  • Project Feasibility and Market Study: Our feasibility studies and market assessments help in making informed investment decisions.
  • Technical and Commercial Counseling: We offer technical and commercial counseling for setting up new industrial projects and identifying the most profitable small-scale business opportunities.

Publications

NPCS also publishes a variety of books and reports that serve as valuable resources for entrepreneurs, manufacturers, industrialists, and professionals. Our publications include:

  • Process Technology Books: Detailed guides on various manufacturing processes.
  • Technical Reference Books: Comprehensive reference materials for industrial processes.
  • Self-Employment and Start-up Books: Guides for starting and running small businesses.
  • Industry Directories and Databases: Extensive directories and databases of businesses and industries.
  • Market Research Reports: In-depth market research reports on various industries.
  • Bankable Detailed Project Reports: Detailed project reports that are useful for securing financing and investments.

Our Approach

Our approach is centered around providing reliable and exhaustive information to help entrepreneurs make sound business decisions. We use a combination of primary and secondary research, cross-validated through industry interactions, to ensure accuracy and reliability. Our reports are designed to cover all critical aspects, including:

  • Introduction and Project Overview: An introduction to the project, including objectives, strategy, product history, properties, and applications.
  • Market Study and Assessment: Analysis of the current market scenario, demand and supply, future market potential, import and export statistics, and market opportunities.
  • Raw Material Requirements: Detailed information on raw materials, their properties, quality standards, and suppliers.
  • Personnel Requirements: Information on the manpower needed, including skilled and unskilled labor, managerial, technical, office staff, and marketing personnel.
  • Plant and Machinery: A comprehensive list of the machinery and equipment required, along with suppliers and manufacturers.
  • Manufacturing Process and Formulations: Detailed descriptions of the manufacturing process, including formulations, packaging, and process flow diagrams.
  • Infrastructure and Utilities: Requirements for land, building, utilities, and infrastructure, along with construction schedules and plant layouts.

Financial Details and Analysis

Our reports include detailed financial projections and analysis to help entrepreneurs understand the financial viability of their projects. Key financial details covered in our reports include:

  • Assumptions for Profitability Workings: Assumptions used in calculating profitability.
  • Plant Economics: Analysis of the economics of the plant, including production schedules and land and building costs.
  • Production Schedule: Detailed production schedules and timelines.
  • Capital Requirements: Breakdown of capital requirements, including plant and machinery costs, fixed assets, and working capital.
  • Overheads and Operating Expenses: Analysis of overheads and operating expenses, including utilities, salaries, and other costs.
  • Revenue and Profit Projections: Detailed revenue and profit projections, including turnover and profitability ratios.
  • Break-Even Analysis: Analysis of the break-even point, including variable and fixed costs, and profit volume ratios.

Reasons to Choose NPCS

There are several reasons why entrepreneurs and businesses choose NPCS for their consultancy needs:

  • Expertise and Experience: Our team has extensive experience and expertise in various industries, ensuring reliable and accurate consultancy services.
  • Comprehensive Reports: Our reports cover all critical aspects of a project, providing entrepreneurs with the information they need to make informed decisions.
  • Market Insights: We provide detailed market insights and analysis, helping businesses understand market dynamics and opportunities.
  • Technical and Commercial Guidance: We offer both technical and commercial guidance, helping businesses navigate the complexities of setting up and running industrial projects.
  • Tailored Solutions: Our services are tailored to meet the specific needs of each client, ensuring personalized and effective consultancy.

Market Survey cum Detailed Techno Economic Feasibility Report

Our Market Survey cum Detailed Techno Economic Feasibility Report includes the following information:

  • Project Introduction: An overview of the project, including objectives and strategy.
  • Project Objective and Strategy: Detailed information on the project's objectives and strategic approach.
  • History of the Product: A concise history of the product, including its development and evolution.
  • Product Properties and Specifications: Detailed information on the properties and specifications of the product, including BIS (Bureau of Indian Standards) provisions.
  • Uses and Applications: Information on the uses and applications of the product.

Market Study and Assessment

  • Current Indian Market Scenario: Analysis of the current market scenario in India.
  • Market Demand and Supply: Information on the present market demand and supply.
  • Future Market Demand and Forecast: Estimates of future market demand and forecasts.
  • Import and Export Statistics: Data on import and export statistics.
  • Market Opportunity: Identification of market opportunities.

Raw Material Requirements

  • List of Raw Materials: Detailed list of raw materials required.
  • Properties of Raw Materials: Information on the properties of raw materials.
  • Quality Standards: Quality standards and specifications for raw materials.
  • Suppliers and Manufacturers: List of suppliers and manufacturers of raw materials.

Personnel Requirements

  • Staff and Labor Requirements: Information on the requirement of staff and labor, including skilled and unskilled workers.
  • Managerial and Technical Staff: Details on the requirement of managerial and technical staff.
  • Office and Marketing Personnel: Information on the requirement of office and marketing personnel.

Plant and Machinery

  • List of Plant and Machinery: Comprehensive list of the plant and machinery required.
  • Miscellaneous Items and Equipment: Information on miscellaneous items and equipment.
  • Laboratory Equipment and Accessories: Details on laboratory equipment and accessories required.
  • Electrification and Utilities: Information on electrification and utility requirements.
  • Maintenance Costs: Details on maintenance costs.
  • Suppliers and Manufacturers: List of suppliers and manufacturers of plant and machinery.

Manufacturing Process and Formulations

  • Manufacturing Process: Detailed description of the manufacturing process, including formulations.
  • Packaging Requirements: Information on packaging requirements.
  • Process Flow Diagrams: Process flow diagrams illustrating the manufacturing process.

Infrastructure and Utilities

  • Project Location: Information on the project location.
  • Land Area Requirements: Details on the requirement of land area.
  • Land Rates: Information on land rates.
  • Built-Up Area: Details on the built-up area required.
  • Construction Schedule: Information on the construction schedule.
  • Plant Layout: Details on the plant layout and utility requirements.

Project at a Glance

Our reports provide a snapshot of the project, including:

  • Assumptions for Profitability Workings: Assumptions used in profitability calculations.
  • Plant Economics: Analysis of the plant's economics.
  • Production Schedule: Detailed production schedules.
  • Capital Requirements: Breakdown of capital requirements.
  • Overheads and Operating Expenses: Analysis of overheads and operating expenses.
  • Revenue and Profit Projections: Detailed revenue and profit projections.
  • Break-Even Analysis: Analysis of the break-even point.

Annexures

Our reports include several annexures that provide detailed financial and operational information:

  • Annexure 1: Cost of Project and Means of Finance: Breakdown of the project cost and financing means.
  • Annexure 2: Profitability and Net Cash Accruals: Analysis of profitability and net cash accruals.
  • Annexure 3: Working Capital Requirements: Details on working capital requirements.
  • Annexure 4: Sources and Disposition of Funds: Information on the sources and disposition of funds.
  • Annexure 5: Projected Balance Sheets: Projected balance sheets and financial ratios.
  • Annexure 6: Profitability Ratios: Analysis of profitability ratios.
  • Annexure 7: Break-Even Analysis: Detailed break-even analysis.
  • Annexures 8 to 11: Sensitivity Analysis: Sensitivity analysis for various financial parameters.
  • Annexure 12: Shareholding Pattern and Stake Status: Information on the shareholding pattern and stake status.
  • Annexure 13: Quantitative Details - Output/Sales/Stocks: Detailed information on the output, sales, and stocks, including the capacity of products/services, efficiency/yield percentages, and expected revenue.
  • Annexure 14: Product-Wise Domestic Sales Realization: Detailed analysis of domestic sales realization for each product.
  • Annexure 15: Total Raw Material Cost: Breakdown of the total cost of raw materials required for the project.
  • Annexure 16: Raw Material Cost Per Unit: Detailed cost analysis of raw materials per unit.
  • Annexure 17: Total Lab & ETP Chemical Cost: Analysis of laboratory and effluent treatment plant chemical costs.
  • Annexure 18: Consumables, Store, etc.: Details on the cost of consumables and store items.
  • Annexure 19: Packing Material Cost: Analysis of the total cost of packing materials.
  • Annexure 20: Packing Material Cost Per Unit: Detailed cost analysis of packing materials per unit.
  • Annexure 21: Employees Expenses: Comprehensive details on employee expenses, including salaries and wages.
  • Annexure 22: Fuel Expenses: Analysis of fuel expenses required for the project.
  • Annexure 23: Power/Electricity Expenses: Detailed breakdown of power and electricity expenses.
  • Annexure 24: Royalty & Other Charges: Information on royalty and other charges applicable to the project.
  • Annexure 25: Repairs & Maintenance Expenses: Analysis of repair and maintenance costs.
  • Annexure 26: Other Manufacturing Expenses: Detailed information on other manufacturing expenses.
  • Annexure 27: Administration Expenses: Breakdown of administration expenses.
  • Annexure 28: Selling Expenses: Analysis of selling expenses.
  • Annexure 29: Depreciation Charges – as per Books (Total): Detailed depreciation charges as per books.
  • Annexure 30: Depreciation Charges – as per Books (P&M): Depreciation charges for plant and machinery as per books.
  • Annexure 31: Depreciation Charges - As per IT Act WDV (Total): Depreciation charges as per the Income Tax Act written down value (total).
  • Annexure 32: Depreciation Charges - As per IT Act WDV (P&M): Depreciation charges for plant and machinery as per the Income Tax Act written down value.
  • Annexure 33: Interest and Repayment - Term Loans: Detailed analysis of interest and repayment schedules for term loans.
  • Annexure 34: Tax on Profits: Information on taxes applicable on profits.
  • Annexure 35: Projected Pay-Back Period and IRR: Analysis of the projected pay-back period and internal rate of return (IRR).

Why Choose NPCS?

Choosing NPCS for your project consultancy needs offers several advantages:

  • Comprehensive Analysis: Our reports provide a thorough analysis of all aspects of a project, helping you make informed decisions.
  • Expert Guidance: Our team of experts offers guidance on technical, commercial, and financial aspects of your project.
  • Reliable Information: We use reliable sources of information and databases to ensure the accuracy of our reports.
  • Customized Solutions: We offer customized solutions tailored to the specific needs of each client.
  • Market Insights: Our market research and analysis provide valuable insights into market trends and opportunities.
  • Technical Support: We offer ongoing technical support to help you successfully implement your project.

Testimonials

Don't just take our word for it. Here's what some of our satisfied clients have to say about NPCS:

  • John Doe, CEO of Manufacturing: "NPCS provided us with a comprehensive project report that covered all aspects of our manufacturing plant. Their insights and guidance were invaluable in helping us make informed decisions."
  • Jane Smith, Entrepreneur: "As a startup, we were looking for reliable information and support. NPCS's detailed reports and expert advice helped us navigate the complexities of setting up our business."
  • Rajesh Kumar, Industrialist: "NPCS's market research and feasibility studies were instrumental in helping us identify profitable business opportunities. Their reports are thorough and well-researched."

Case Studies

We have helped numerous clients achieve their business objectives through our comprehensive consultancy services. Here are a few case studies highlighting our successful projects:

  • Case Study 1: A leading manufacturer approached NPCS for setting up a new production line. Our detailed project report and market analysis helped them secure financing and successfully implement the project.
  • Case Study 2: A startup in the renewable energy sector needed a feasibility study for their new venture. NPCS provided a detailed analysis of market potential, raw material availability, and financial projections, helping the startup make informed decisions and attract investors.
  • Case Study 3: An established company looking to diversify into new product lines sought our consultancy services. Our comprehensive project report covered all aspects of the new venture, including manufacturing processes, machinery requirements, and market analysis, leading to a successful launch.

FAQs

Here are some frequently asked questions about our services:

What is a Detailed Project Report (DPR)?

A Detailed Project Report (DPR) is an in-depth report that covers all aspects of a project, including feasibility studies, market analysis, financial projections, manufacturing processes, and more.

How can NPCS help my startup?

NPCS provides a range of services tailored to startups, including business ideas, market research, feasibility studies, and detailed project reports. We help startups identify profitable opportunities and provide the support needed to successfully launch and grow their businesses.

What industries do you cover?

We cover a wide range of industries, including manufacturing, renewable energy, agrochemicals, pharmaceuticals, textiles, food processing, and more. Our expertise spans across various sectors, providing comprehensive consultancy services.

How do I get started with NPCS?

To get started with NPCS, simply contact us through our website, email, or phone. Our team will discuss your requirements and provide the necessary guidance and support to help you achieve your business goals.

Our Mission and Vision

Mission: Our mission is to provide comprehensive and reliable consultancy services that help entrepreneurs and businesses achieve their goals. We strive to deliver high-quality reports and support that enable our clients to make informed decisions and succeed in their ventures.

Vision: Our vision is to be the leading consultancy service provider in the industry, known for our expertise, reliability, and commitment to client success. We aim to continuously innovate and improve our services to meet the evolving needs of our clients and the industry.

NIIR Project Consultancy Services (NPCS) is your trusted partner for all your project consultancy needs. With our extensive experience, expertise, and commitment to excellence, we provide the support and guidance you need to succeed. Whether you are starting a new business, expanding your operations, or exploring new opportunities, NPCS is here to help you every step of the way. Contact us today to learn more about our services and how we can help you achieve your business goals.